دريم إتش 12 برو

دليل استخدام مكنسة دريم H12 برو الرطبة والجافة

الموديل: H12 Pro

مقدمة

This manual provides essential instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your DREAME H12 Pro Wet Dry Vacuum Cleaner. Please read this manual thoroughly before using the appliance and retain it for future reference.

DREAME H12 Pro Wet Dry Vacuum Cleaner

Image: The DREAME H12 Pro Wet Dry Vacuum Cleaner, showcasinبفضل تصميمه الأنيق وخزانات المياه المدمجة.

الإعداد والاستخدام الأولي

1. التفريغ والتجمع

  1. قم بإزالة جميع المكونات بعناية من العبوة.
  2. Attach the handle to the main body of the vacuum until it clicks into place.
  3. Ensure the clean water tank and used water tank are securely installed.

2. شحن الجهاز

Place the DREAME H12 Pro on its charging dock. Connect the power adapter to the dock and a power outlet. The LED display will indicate charging status. Fully charge the device before first use, which typically takes approximately 3.5 hours.

3. ملء خزان المياه النظيفة

Remove the clean water tank (900mL capacity) from the main unit. Fill it with clean tap water, optionally adding a small amount of DREAME-approved cleaning solution. Do not overfill. Reinstall the tank securely.

DREAME H12 Pro High Capacity Water Tanks

Image: Illustration of the DREAME H12 Pro's 900mL clean water tank and 700mL used water tank, designed for extended cleaning sessions.

تعليمات التشغيل

1. Powering On and Cleaning Modes

Press the power button to turn on the vacuum. The device will automatically detect the mess level and adjust suction power and water flow accordingly. The LED display provides real-time information on battery level, cleaning mode, and dirt detection.

DREAME H12 Pro Smart Dirt Detection Display

Image: The DREAME H12 Pro's intelligent display indicating different dirt levels (red for heavy, orange for medium, green for light) during cordless wet/dry cleaning.

2. التنظيف من الحافة إلى الحافة

The DREAME H12 Pro features an enhanced dual-edged cleaning brush designed to clean close to baseboards and deep into corners, minimizing missed spots. Guide the vacuum along edges for thorough cleaning.

DREAME H12 Pro Edge-to-Edge Cleaning Capability

Image: The DREAME H12 Pro demonstrating its edge-to-edge cleaning ability, reaching within 0.23 inches of walls and furniture.

3. Cleaning Various Messes

The vacuum is suitable for cleaning both wet and dry messes on hard floors. Its powerful suction and water delivery system effectively remove spills, hair, debris, dirt, and dust.

DREAME H12 Pro Versatile Cleaning

Image: The DREAME H12 Pro effectively cleaning a mix of wet and dry debris on a hard floor, highlighting its versatile cleaning capabilities.

DREAME H12 Pro Cleaning Stubborn Stains

Image: The DREAME H12 Pro cleaning various stubborn stains and spills on a kitchen counter, demonstrating its effectiveness on tough messes.

صيانة

1. Self-Cleaning and Hot Air Drying

After each use, place the vacuum on its charging dock and press the self-clean button. The device will automatically clean the brush roller and then dry it with 131°F (55°C) hot air for 1 hour, preventing odors and bacterial growth.

DREAME H12 Pro Automatic Hot Air Drying

Image: The DREAME H12 Pro's brush roller undergoing automatic hot air drying at 131°F (55°C) on its charging base after a self-cleaning cycle.

2. Emptying the Used Water Tank

Empty the used water tank (700mL capacity) after each cleaning session. Remove the tank, open the lid, and dispose of the dirty water. Rinse the tank and filter thoroughly with clean water. Reinstall the tank securely.

3. صيانة أسطوانة الفرشاة

The serrated brush scraper helps prevent hair entanglement during operation. Periodically, remove the brush roller for manual cleaning to ensure optimal performance. The brush roller is designed for easy replacement.

DREAME H12 Pro Hair Entanglement Reduction

الصورة: لقطة مقربة view of the DREAME H12 Pro's brush roller and the internal mechanism designed to reduce hair entanglement during operation.

DREAME H12 Pro Easy Brush Roller Replacement

Image: The DREAME H12 Pro's brush roller shown removed from the unit, illustrating the ease of replacement and maintenance.

استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
لا يتم تشغيل الفراغبطارية منخفضة؛ زر الطاقة غير مضغوط بشكل صحيحCharge the vacuum fully; Ensure power button is pressed firmly
أداء التنظيف الضعيفDirty brush roller; Empty clean water tank; Full used water tankClean or replace brush roller; Refill clean water tank; Empty used water tank
رائحة كريهةUsed water tank not emptied/cleaned; Brush roller not dried properlyEmpty and thoroughly clean used water tank; Run self-cleaning with hot air drying cycle

تحديد

  • ماركة: حلم
  • نموذج: اتش 12 برو
  • ميزة خاصة: Wet/Dry Cleaning, Hot Air Drying, Edge-to-Edge Cleaning, Smart Mess Detection
  • نوع الفلتر: HEPA Filter (possibly)
  • المكونات المتضمنة: Mop, Roller Brush
  • لاسلكي: نعم
  • سعة خزان المياه النظيفة: 0.9 لتر (900 مل)
  • Used Water Tank Capacity: 0.7 لتر (700 مل)
  • عامل الشكل: يلزق
  • نوع البطارية: ليثيوم أيون
  • عمر البطارية: Up to 35 minutes (based on laboratory testing)
  • طريقة التحكم: اللمس، الضغط على الزر
  • نوع العرض: قاد
  • الاستخدام الداخلي/الخارجي: داخلي

الضمان والدعم

للحصول على معلومات الضمان أو الدعم الفني أو الاستفسارات المتعلقة بالخدمة، يرجى الرجوع إلى موقع DREAME الرسمي. website or contact DREAME customer service. Keep your purchase receipt as proof of purchase for warranty claims.

دريم الرسمي Webموقع: www.dreame-tech.com

© 2024 DREAME Technology. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.