مقدمة
This manual provides essential information for the proper setup, operation, and maintenance of your SAMSUNG Jet Slim LED Brush (Model: VCA-SABC95/AA). Please read this manual thoroughly before using the product to ensure safe and efficient operation.
المنتج انتهىview
The SAMSUNG Jet Slim LED Brush is an advanced attachment designed for SAMSUNG Jet Stick Vacuums. It is engineered to effectively pick up fine dust and debris from various floor types, including carpets and hard floors. Key features include:
- إضاءة LED: Integrated LED lights illuminate dark areas, making hidden dust and dirt visible for thorough cleaning.
- بكرة مضادة للتشابك: A specially designed roller minimizes hair entanglement, simplifying maintenance and ensuring consistent performance.
- تنظيف متعدد الاستخدامات: Efficiently cleans both fine dust and larger debris on various floor surfaces.
- التوافق: Designed for use with Bespoke Jet AI, Bespoke Jet, Jet 90, Jet 75, and Jet 60 series vacuum cleaners.
Figure 1: The SAMSUNG Jet Slim LED Brush, showing its sleek design and the "SAMSUNG" branding.
يثبت
Follow these steps to properly attach the Slim LED Brush to your SAMSUNG Jet Stick Vacuum:
- تأكد من إيقاف تشغيل الطاقة: Before attaching or detaching any accessories, ensure your SAMSUNG Jet Stick Vacuum is turned off and disconnected from its power source.
- Align the Brush: Hold the Slim LED Brush and align its connector with the connection point at the end of your vacuum's extension pipe or directly to the main body if applicable.
- المرفق الآمن: Push the brush firmly onto the connection point until you hear a click, indicating it is securely locked in place. Gently pull on the brush to confirm it is properly attached and will not detach during use.
- التحقق من التوافق: This brush is compatible with Bespoke Jet AI, Bespoke Jet, Jet 90, Jet 75, and Jet 60 series vacuums. Attempting to attach it to incompatible models may result in damage.
تعليمات التشغيل
Once the Slim LED Brush is securely attached, you can begin cleaning. The LED light feature will activate automatically when the vacuum is in operation.
- تشغيل الطاقة: Turn on your SAMSUNG Jet Stick Vacuum. The LED lights on the Slim LED Brush will illuminate, highlighting dust and debris on the floor surface.
- تقنية التنظيف: Move the vacuum slowly and steadily across the floor. The LED illumination will help you identify areas that require more attention, especially in dimly lit spaces or under furniture.
- أنواع الأرضيات: The brush is designed for effective cleaning on both hard floors and carpets. Adjust your vacuum's power setting as needed for optimal performance on different surfaces.
- ميزة مضادة للتشابك: The anti-tangle roller is designed to reduce hair wrapping. If you notice a decrease in performance, refer to the Maintenance section for cleaning instructions.
Figure 2: The Slim LED Brush in action, demonstrating how its LED light reveals hidden dust and debris on the floor.
صيانة
Regular maintenance ensures the longevity and optimal performance of your Slim LED Brush.
تنظيف أسطوانة الفرشاة
- Power Off and Detach: Always turn off and detach the brush from the vacuum before performing any maintenance.
- Access the Roller: Locate the release mechanism for the brush roller, usually a latch or button on the side of the brush head. Follow your vacuum's specific instructions for removing the roller.
- إزالة الحطام: Carefully remove any tangled hair, threads, or large debris from the roller using scissors or a brush cleaning tool. The anti-tangle design helps, but occasional manual cleaning is still recommended.
- امسح: استخدمي قطعة قماش ناعمةamp cloth to wipe down the roller and the inside of the brush head. Ensure all parts are completely dry before reassembling.
- إعادة التجميع: Insert the clean roller back into the brush head and secure it until it clicks into place.
Cleaning the LED Area
- Gently wipe the LED light area with a dry, soft cloth to remove any dust or dirt that might obstruct the light. Do not use abrasive cleaners or excessive moisture.
استكشاف الأخطاء وإصلاحها
If you encounter issues with your Slim LED Brush, refer to the following common problems and solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| مصابيح LED لا تعمل. | Vacuum not powered on; loose connection; obstructed sensor. | Ensure the vacuum is powered on. Check if the brush is securely attached. Clean any dust or debris from the LED area. |
| Brush roller is not spinning or spinning slowly. | Hair or debris tangled in the roller; obstruction; brush not properly attached. | Turn off the vacuum and detach the brush. Remove any tangled hair or obstructions from the roller (refer to Maintenance). Reattach the brush securely. |
| Reduced suction when using the brush. | Brush head clogged; vacuum filter needs cleaning; vacuum dustbin full. | Check the brush head for large obstructions. Clean or replace your vacuum's filter. Empty the vacuum's dustbin. |
| Brush detaches during use. | Improper attachment; worn connection point. | Ensure the brush is pushed firmly onto the vacuum's pipe until it clicks. If the issue persists, inspect the connection points for wear or damage. |
If the problem persists after attempting these solutions, please contact SAMSUNG customer support for further assistance.
تحديد
| ميزة | التفاصيل |
|---|---|
| ماركة | سامسونج |
| اسم الموديل | SAMSUNG Jet Slim LED Brush for Jet Stick Vacuums, VCA-SABC95/AA |
| رقم الموديل | VCA-SABC95/AA |
| ميزة خاصة | LED Lighting, Anti-Tangle Roller |
| المكونات المضمنة | LED Brush Tool |
| لون | Chrometal Black |
| أبعاد المنتج | 9.8 بوصة طول × 9.8 بوصة عرض × 2.8 بوصة ارتفاع |
| وزن العنصر | 1.5 رطل |
| التوافق | Bespoke Jet AI, Bespoke Jet, Jet 90, Jet 75, Jet 60 series vacuums |
| الشركة المصنعة | سامسونج |
الضمان والدعم
For warranty information, product registration, or technical support, please refer to the documentation provided with your SAMSUNG Jet Stick Vacuum or visit the official SAMSUNG website. You can also contact SAMSUNG customer service directly for assistance with your Slim LED Brush.
الدعم عبر الإنترنت: www.samsung.com/us/support/
