SAMA NEVIEW 4503 Mid Tower PC Case Instruction Manual

1. انتهى المنتجview

The SAMA NEVIEW 4503 is a mid-tower PC case designed for high-performance computer builds. It features dual tempered glass panels for component visibility, pre-installed ARGB fans for cooling and aesthetics, and a spacious interior for various hardware configurations. This manual provides essential information for assembly, operation, and maintenance.

Image 1.1: SAMA NEVIEW 4503 Mid Tower PC Case, showcasing its dual tempered glass panels and pre-installed ARGB fans.

2. الميزات الرئيسية

• Dual Tempered Glass Panels: توفر الألواح الأمامية والجانبية رؤية واضحة view من المكونات الداخلية.
• مراوح ARGB المثبتة مسبقًا: Four 120mm ARGB fans with a custom hub are included for efficient cooling and customizable lighting.
• High Airflow Design: Supports up to 7x 120mm or 6x 140mm fans and top-mounted 360mm radiators for optimal thermal performance.
• Wide Hardware Compatibility: Accommodates E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards, GPUs up to 430mm, CPU coolers up to 183mm, and ATX PSUs up to 238mm.
• Tool-Free Panels: Simplifies installation and upgrades.
• Adjustable I/O Design: Front I/O panel can be relocated for user convenience.
• إدارة فعالة للكابلات: Ample routing space behind the motherboard tray (33mm deep) ensures a clean build.
• صيانة سهلة: Magnetic dust filters on the top and bottom facilitate cleaning.

3. الإعداد والتثبيت

3.1 فك العبوة والفحص الأولي

Carefully remove the PC case from its packaging. Inspect for any signs of damage during transit. Retain all packaging materials for future transport or warranty claims.

3.2 إزالة اللوحة

The tempered glass side and front panels are designed for tool-free removal. Gently pull the panels to detach them. This provides full access to the interior for component installation.

الصورة 3.1: انفجرت view illustrating the detachable components, including tempered glass panels and the internal structure.

3.3 تركيب اللوحة الأم

1. قم بتركيب غطاء منافذ الإدخال/الإخراج (إذا لم يكن مثبتًا مسبقًا على اللوحة الأم) في الفتحة الخلفية للهيكل.
2. Align your E-ATX, ATX, Micro-ATX, or Mini-ITX motherboard with the standoffs inside the case.
3. قم بتأمين اللوحة الأم باستخدام البراغي المتوفرة.

3.4 تثبيت وحدة معالجة الرسومات

The case supports GPUs up to 430mm in length. It offers both horizontal and vertical GPU mounting options.

• التثبيت الأفقي: Remove the necessary PCIe slot covers at the rear of the case. Insert the GPU into the PCIe slot on the motherboard and secure it with screws.
• التثبيت العمودي: An optional vertical GPU mount (sold separately) can be used. Follow the instructions provided with the vertical mount for installation.

Image 3.2: Illustration of the case supporting both horizontal and vertical GPU configurations.

3.5 تركيب وحدة إمداد الطاقة (PSU)

The PSU is installed at the bottom of the case in a dedicated compartment, supporting ATX PSUs up to 238mm. Slide the PSU into its bay and secure it with screws from the rear of the case.

3.6 تركيب المروحة والرادياتير

شمال شرقVIEW 4503 comes with four 120mm ARGB fans pre-installed. Additional cooling options include:

• قمة: Supports up to 3x 120mm or 2x 140mm fans, or a 120/240/280/360mm liquid cooler.
• مؤخرة: Supports 1x 120mm or 1x 140mm fan, or a 120/140mm liquid cooler.
• Motherboard Fan Frame: Supports 3x 120mm or 3x 140mm fans (pre-installed).
• قاع: Supports 1x 120mm or 1x 140mm fan.

Image 3.3: Internal layout indicating maximum CPU cooler height, GPU length, and various fan/radiator mounting points.

3.7 إدارة الكابلات

Utilize the 33mm deep space behind the motherboard tray for routing and organizing cables. This helps maintain optimal airflow and a clean interior aesthetic.

الصورة 3.4: خلفي view of the case highlighting cable management space and drive mounting options for 2.5" SSDs and 3.5" HDDs.

3.8 لوحة الإدخال/الإخراج الأمامية

The front I/O panel can be adjusted to either the right bottom or front bottom position. It includes 2x USB 3.0 ports, 1x Type-C port, a 2-in-1 audio interface, and LED/Power buttons.

Image 3.5: Close-up of the adjustable I/O port, detailing its components and flexible positioning.

4. Operating the ARGB Fans

The pre-installed ARGB fans are connected to a custom hub. This hub allows for both manual control and motherboard synchronization for lighting effects.

• التحكم اليدوي: Use the dedicated LED button on the front I/O panel to cycle through various lighting modes and colors.
• مزامنة اللوحة الأم: To synchronize the fan lighting with your motherboard's RGB software (e.g., ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync), press and hold the LED button on the front I/O panel for 7-8 seconds. Ensure the ARGB hub is connected to a compatible 3-pin ARGB header on your motherboard and powered via a SATA cable from your PSU.

Image 4.1: Diagram illustrating the ARGB fan hub connections to the PSU and motherboard for lighting control.

Note: The included fans do not support speed control via the ARGB hub. They operate at a fixed speed.

Video 4.2: SAMA 4503 chassis product display video, demonstrating the case's features and ARGB lighting effects.

Video 4.3: 4503 Chassis multi-angle display, showcasing the chassis panel design and various angles of the case.

Video 4.4: SAMA NEVIEW 4503 computer case video display, providing a visual overview من المنتج.

5. الصيانة

5.1 تنظيف فلتر الغبار

The SAMA NEVIEW 4503 is equipped with magnetic dust filters on the top and bottom panels. Regularly clean these filters to prevent dust buildup and maintain optimal airflow.

1. Gently remove the magnetic dust filters from their respective positions.
2. قم بتنظيف المرشحات باستخدام الهواء المضغوط، أو فرشاة ناعمة، أو عن طريق الشطف بالماء (تأكد من جفافها تمامًا قبل إعادة تركيبها).
3. Reattach the filters to the case.

6. استكشاف الأخطاء وإصلاحها

6.1 Fans Not Lighting Up

• Ensure the ARGB fan hub is correctly connected to a SATA power cable from your PSU.
• Verify that the ARGB cable from the hub is connected to a compatible 3-pin ARGB header on your motherboard.
• If using manual control, press the LED button on the front I/O panel. If using motherboard synchronization, press and hold the LED button for 7-8 seconds to switch control to the motherboard software.

6.2 Difficulty Aligning Motherboard

• Some users have noted that the rear I/O shield port can be slightly recessed. Ensure proper alignment before attempting to secure the motherboard.

6.3 Short I/O Panel Cables

• If relocating the I/O panel, be aware that the cables may be short. Plan your cable routing carefully to avoid strain on the connectors.

7. المواصفات

8. الضمان والدعم

For warranty information, technical support, or replacement parts, please contact SAMA customer service or visit the official SAMA webالموقع. احتفظ بإثبات الشراء الخاص بك لتقديم مطالبات الضمان.

Official SAMA Store: SAMA Official Store on Amazon