TPOB Goblin Professional Hair Clipper User Manual

مقدمة

Thank you for choosing the TPOB Goblin Professional Hair Clipper. This manual provides essential information for the safe and effective use, maintenance, and care of your new professional hair clipper. Designed for precision and power, the Goblin clipper features an 11000 RPM motor and a Black Diamond Carbon DLC fade blade for superior cutting performance.

معلومات هامة حول السلامة

Please read all instructions before using this appliance. To reduce the risk of electric shock, burns, fire, or injury to persons:

• السلامة الكهربائية: Do not reach for an appliance that has fallen into water. Unplug immediately. Do not use while bathing or in a shower. Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid. Always unplug this appliance from the electrical outlet immediately after using.
• سلامة الشفرة: The Black Diamond Carbon DLC blade is sharp. Handle with care to prevent skin and eye injuries. Ensure the blade is properly aligned before use.
• الاستخدام العام: Close supervision is necessary when this appliance is used by, on, or near children or invalids. Use this appliance only for its intended household use as described in this manual. Do not use attachments not recommended by the manufacturer. Keep the cord away from heated surfaces. Never drop or insert any object into any opening. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
• مصدر الطاقة: This appliance is designed for 100-240V, 50/60Hz, 40W operation. Use only the provided charging dock and USB cable.

محتويات الحزمة

Your TPOB Goblin Professional Hair Clipper package includes the following items:

• TPOB Goblin Professional Hair Clipper
• قاعدة الشحن
• كابل شحن USB
• Screwdriver (for blade adjustment/maintenance)
• أمشاط توجيه متعددة (بأحجام مختلفة)

Image: Contents of the TPOB Goblin Professional Hair Clipper package, including the clipper, charging dock, USB cable, screwdriver, and various guide combs.

يثبت

1. شحن ماكينة قص الشعر

Before first use, fully charge your TPOB Goblin clipper. The clipper can be used corded or cordless.

1. قم بتوصيل كابل شحن USB بقاعدة الشحن.
2. قم بتوصيل الطرف الآخر من كابل USB بمحول طاقة مناسب (غير مرفق) أو بمنفذ USB.
3. Place the TPOB Goblin clipper onto the charging dock, ensuring it is seated correctly. The indicator light on the clipper will illuminate to show it is charging.
4. Allow the clipper to charge for approximately 2-3 hours for a full charge. The indicator light may change color or turn off when fully charged (refer to specific model indicator behavior if available).

Image: The TPOB Goblin clipper placed on its charging dock.

2. Attaching and Detaching Guide Combs

Guide combs allow for precise hair length control.

• لإرفاق: Align the guide comb with the clipper blade and push firmly until it clicks into place.
• ليفصل: Gently pull the guide comb away from the blade while holding the clipper securely.

3. Blade Adjustment (Zero-Gap)

The TPOB Goblin features a Black Diamond Carbon DLC fade blade, which can be adjusted for a closer cut (zero-gapped). This procedure should only be performed by experienced users.

1. تأكد من إيقاف تشغيل ماكينة قص الشعر وفصلها عن التيار الكهربائي.
2. Using the provided screwdriver, carefully loosen the two screws on the blade assembly.
3. Gently slide the moving blade forward until it is aligned with the stationary blade, ensuring it does not extend past the stationary blade to prevent skin irritation.
4. Tighten the screws securely. Test the blade alignment before use.

الصورة: تفصيلية view of the TPOB Goblin clipper's Black Diamond Carbon DLC blade.

تعليمات التشغيل

1. تشغيل / إيقاف التشغيل

• To turn the clipper ON, press the power button located on the front of the clipper. The indicator light will illuminate.
• To turn the clipper عن, press the power button again. The indicator light will turn off.

الصورة: الجبهة view of the TPOB Goblin clipper, showing the power button and visible motor.

2. Hair Cutting and Trimming

For best results, ensure hair is clean and dry. Always start with a longer guide comb if unsure of the desired length.

• Hold the clipper with the blade teeth pointing upwards.
• ابدأ القص من أسفل الرأس، وتحرك لأعلى عكس اتجاه نمو الشعر.
• Use smooth, overlapping strokes for an even cut.
• For fading, gradually switch to shorter guide combs or use the lever to adjust blade length.

3. Using the Taper Lever

The taper lever on the side of the clipper allows for seamless blending and precise adjustments to cutting length without changing guide combs.

• Move the lever upwards for a shorter cut.
• Move the lever downwards for a longer cut.
• Utilize the lever in conjunction with guide combs for advanced fading techniques.

صيانة

1. Blade Cleaning and Oiling

Regular cleaning and oiling are crucial for maintaining the performance and longevity of your Black Diamond Carbon DLC blade.

1. بعد كل استخدام، قم بإيقاف تشغيل ماكينة الحلاقة وافصلها عن الكهرباء.
2. Use the cleaning brush (not explicitly listed but standard for clippers) to brush away any loose hair from the blades.
3. Apply 1-2 drops of clipper oil (not included) to the teeth and heel of the blades.
4. Turn the clipper on for a few seconds to distribute the oil, then turn it off and wipe off any excess oil.

2 تنظيف بشكل عام

امسح جسم ماكينة الحلاقة بقطعة قماش نظيفة.amp قطعة قماش. لا تغمر ماكينة الحلاقة في الماء.

استكشاف الأخطاء وإصلاحها

تحديد

الصورة: الخلفية view of the TPOB Goblin clipper, displaying model and electrical specifications.

الضمان والدعم

For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official TPOB webالموقع. احتفظ بإثبات الشراء الخاص بك لتقديم مطالبات الضمان.

الشركة المصنعة: تي بي أو بي

تاريخ التوفر الأول: 28 ديسمبر 2022