دليل مستخدم جهاز الإرسال والاستقبال بلوتوث 5.2 من إيبفن AK3040C

مقدمة

This manual provides detailed instructions for setting up, operating, and maintaining your eppfun AK3040C Bluetooth 5.2 Transmitter Receiver. This versatile device allows you to wirelessly transmit audio from non-Bluetooth sources or receive audio from Bluetooth-enabled devices, enhancing your audio experience with low latency and high-quality sound.

محتويات الحزمة

يرجى التحقق من الحزمة للعناصر التالية:

eppfun AK3040C Bluetooth Transmitter/Receiver
كابل شحن USB-C
3.5 مللي متر كابل صوت AUX

Contents of the eppfun AK3040C package: the device, a USB-C charging cable, and a 3.5mm audio cable. — This image displays the complete package contents for the eppfun AK3040C, including the main Bluetooth transmitter/receiver unit, a USB-C charging cable, and a 3.5mm AUX audio cable.

المنتج انتهىview

The eppfun AK3040C is a compact and portable device designed for seamless audio connectivity. It features a slide switch for easy mode selection (TX/OFF/RX) and indicator lights for status updates.

Diagram illustrating eppfun AK3040C in Transmitter (TX) and Receiver (RX) modes with various compatible devices. — This diagram shows the eppfun AK3040C operating in Transmitter (TX) mode, sending audio from sources like cars, gaming consoles, or gyms to headphones, earbuds, or sport headphones. It also illustrates Receiver (RX) mode, receiving audio from tablets or cell phones to marine systems, cars, or speakers.

يثبت

1. شحن الجهاز

Before first use, fully charge the AK3040C. Connect the provided USB-C cable to the device's charging port and the other end to a USB power source (e.g., wall adapter, computer USB port).

مدة الشحن: حوالي 2 ساعات للشحن الكامل.
Battery life: Up to 12 hours or more of continuous use.

eppfun AK3040C device next to a battery icon, indicating charging status and long battery life. — The eppfun AK3040C device is shown alongside a battery icon, illustrating its charging capability and extended battery life of 12 hours or more on a 2-hour charge.

2. تشغيل/إيقاف التشغيل واختيار الوضع

The device features a TR / OFF / RX slide switch:

انزلق إلى TR for Transmitter Mode.
انزلق إلى RX for Receiver Mode.
انزلق إلى عن لإيقاف تشغيل الجهاز.

When the switch is turned on (to TR or RX), the device automatically enters pairing mode.

3. الاقتران

Once the device is powered on and in either TX or RX mode, it will automatically enter pairing mode. The indicator light will flash, indicating it's ready to connect.

ل وضع TX: Ensure your Bluetooth headphones/speakers are in pairing mode. The AK3040C will search and connect.
ل وضع RX: Enable Bluetooth on your smartphone, tablet, or other audio source and select "AK3040C" from the list of available devices.

أوضاع التشغيل

وضع الإرسال (تكس)

In TX mode, the AK3040C transmits audio wirelessly from non-Bluetooth devices to your Bluetooth headphones or speakers.

Connect the AK3040C to the audio output (e.g., 3.5mm AUX jack) of your TV, PC, MP3 player, or airplane entertainment system using the provided 3.5mm audio cable.
حرك المفتاح إلى TR.
Put your Bluetooth headphones/speakers into pairing mode. The AK3040C will automatically connect.

Couple watching TV with headphones connected wirelessly via eppfun AK3040C. — A couple is shown watching television, each wearing headphones, with the eppfun AK3040C connected to the TV, providing a private and wireless audio experience.

eppfun AK3040C connected to an airplane entertainment system, transmitting audio to wireless earbuds. — The eppfun AK3040C connected to an airplane seat's audio jack, allowing a user to listen to in-flight entertainment wirelessly with their Bluetooth earbuds.

وضع جهاز الاستقبال (RX)

In RX mode, the AK3040C receives audio wirelessly from Bluetooth-enabled devices and outputs it to wired headphones or speakers.

Connect your wired headphones, car stereo, or home speaker system to the AK3040C's 3.5mm audio output using the provided 3.5mm audio cable.
حرك المفتاح إلى RX.
Enable Bluetooth on your smartphone, tablet, or other audio source and select "AK3040C" to pair.

Woman listening to music from a tablet via a Bluetooth speaker connected to eppfun AK3040C. — A woman is in a kitchen setting, listening to music from her tablet, which is wirelessly connected to a portable speaker through the eppfun AK3040C in receiver mode.

Person driving, streaming music from a phone to the car stereo using eppfun AK3040C. — An image depicting a person driving, with their smartphone streaming music wirelessly to the car's audio system, facilitated by the eppfun AK3040C Bluetooth adapter.

Connecting Two Devices Simultaneously (TX Mode)

The AK3040C can connect to two Bluetooth headphones simultaneously in Transmitter (TX) mode, allowing both to output audio with low latency. Follow the TX mode pairing steps for the first device, then repeat for the second device.

صيانة

Keep the device clean and dry. Avoid exposure to extreme temperatures, humidity, or corrosive substances.
لا تحاول تفكيك الجهاز أو تعديله، لأن هذا سيؤدي إلى إبطال الضمان وقد يتسبب في حدوث أضرار.
استخدم فقط كابل الشحن المقدم أو كابل USB-C معتمدًا للشحن.

استكشاف الأخطاء وإصلاحها

لا يوجد صوت أو جودة الصوت سيئة

Ensure both the AK3040C and your connected audio device (headphones/speakers/source) are fully charged.
Verify that the 3.5mm audio cable is securely connected to both the AK3040C and the audio source/output device.
Check that the AK3040C is in the correct mode (TX for transmitting, RX for receiving).
Confirm that your Bluetooth headphones/speakers are properly paired with the AK3040C (in TX mode) or that your source device is paired with the AK3040C (in RX mode).
Adjust the volume on both the AK3040C and the connected audio device.
Move the devices closer to each other to ensure they are within the 10m communication range.
Restart both the AK3040C and the connected audio devices.

صعوبة الاقتران

Ensure the AK3040C is in pairing mode (indicator light flashing).
Make sure your other Bluetooth device is also in pairing mode.
Clear previous Bluetooth connections on both devices and attempt to pair again.
قلل التداخل عن طريق الابتعاد عن الأجهزة اللاسلكية الأخرى (أجهزة توجيه الواي فاي، وأجهزة البلوتوث الأخرى).

Audio Latency (Delay)

While the AK3040C supports APTX-Adaptive and APTX LL for low latency, some factors can still introduce delay:

Ensure both the AK3040C and your connected headphones/speakers support APTX Low Latency or APTX-Adaptive codecs. If one device does not, it will default to a higher latency codec like SBC.
The audio source itself might introduce delay (e.g., some projectors or older TVs).
Environmental interference can affect latency.

تحديد

اسم الموديل	AK3040C
نسخة البلوتوث	5.2
تنسيقات الصوت المدعومة	SBC, AAC, APTX, APTX LL, APTX-Adaptive, APTX HD
مسافة التواصل	حتى 10 مترا (33 قدما)
نطاق التردد	2402 ميجا هرتز إلى 2480 ميجا هرتز
وقت الشحن	حوالي 2 ساعات
وقت الاستخدام المستمر	12 ساعات أو أكثر
واجهة الإدخال / الإخراج	3.5mm AUX Audio, USB-C (charging)
المميزات الخاصة	Low Latency, Hands-free Calling (in RX mode)
مادة	أكريلونيتريل بوتادين ستايرين (ABS)، معدن
أبعاد	12.2 × 9 × 3.2 سم
وزن	70 جرام

معلومات السلامة

معالجة البطارية: This device contains a Lithium Ion battery. Do not expose to high temperatures, puncture, or dispose of in fire. Follow local regulations for battery disposal.
تدخل: This device operates on radio frequencies and may cause interference with other wireless devices. Maintain a reasonable distance from other electronics.
تصرف: Do not dispose of this product with household waste. Please refer to local regulations for proper electronic waste disposal.

الضمان والدعم

ضمان

eppfun values your purchase experience and offers an 18-month warranty for the AK3040C. If you encounter any issues or have questions, please contact us.

يدعم

For any product-related inquiries or support, please contact us through the official eppfun store page. We are committed to providing prompt assistance.

إيبفون AK3040C