1. انتهى المنتجview
The VEVOR Cable Protector Ramp is designed to safeguard electrical wires, power lines, hoses, and network cables from damage caused by foot traffic and vehicles. It also functions as a speed bump to control traffic speed, enhancing safety in various environments.
تتضمن الميزات الرئيسية ما يلي:
- Two Cable Channels: يوفر ample space for various cables.
- قدرة تحميل عالية: Rated for up to 11,000 lbs (4,989 kg), accommodating most small cars.
- بناء متين: Made from commercial-grade thermoplastic rubber and a PVC cover for long-term use.
- تحسين الرؤية: Traditional black and yellow color scheme improves visibility in low-light conditions.
- سطح غير قابل للانزلاق: Skid-proof textures on the PVC cover increase traction for vehicles.
- التصميم المعياري: Interlocking connectors allow for extending the ramp طول.
- Flip-Open Cover: Enables quick and easy placement or removal of cables.

2. المكونات
The VEVOR Cable Protector Ramp (Model VV-2CGXB-4PCS) package includes:
- 4 x Cable Protector Ramps

3. التثبيت والإعداد
3.1 Placing Cables
- Identify the desired path for your cables or hoses.
- Lift the yellow flip-open cover on the top of the ramp.
- Carefully place the cables or hoses into the designated channels. Ensure cables are laid flat and not twisted.
- Close the flip-open cover securely.
3.2 Connecting Multiple Ramps
For longer cable runs, multiple ramps can be connected using their modular interlocking design.
- Align the interlocking connectors on the ends of two ramps.
- Push the ramps together firmly until they snap into place, creating a continuous protective path.
- Repeat this process for additional rampق حسب الحاجة.


4. التشغيل
Once installed, the cable protector ramp serves two primary functions:
- حماية الكابل: The robust rubber and PVC construction, combined with the enclosed channels, protects cables from being crushed or damaged by vehicles and foot traffic.
- Traffic Speed Control: ال رamp's design and bright yellow color act as a visual cue and physical deterrent, encouraging drivers to reduce speed in areas like parking lots, driveways, and event venues.
ال رamp is designed to withstand a maximum load capacity of 11,000 lbs (4,989 kg), making it suitable for passage by most small cars and light vehicles. Its operating temperature range is from -40°F to 131°F (-40°C to 55°C).

5. الصيانة
To ensure the longevity and effectiveness of your VEVOR Cable Protector Rampاتبع إرشادات الصيانة التالية:
- التنظيف المنتظم: Periodically clean the ramp surface to remove dirt, debris, or any obstructions that may reduce traction or hinder cable placement. Use mild soap and water if necessary.
- تقتيش: تفقد بانتظام ramps for any signs of wear, damage, or cracking. While the material is wear-proof and non-deformed under normal use, extreme conditions or impacts may cause damage.
- فحص الكابل: Ensure that cables within the channels are properly seated and that the flip-open cover remains securely closed.
- تخزين: If storing the ramps, ensure they are clean and kept in a dry place away from direct sunlight for prolonged periods to prevent material degradation.
6. استكشاف الأخطاء وإصلاحها
This product is designed for straightforward use. Should you encounter any issues, consider the following:
- Cables not fitting: Verify that the cable diameter is within the channel dimensions (1.3" W x 1.2" H / 3.2 x 3.1 cm). Do not force oversized cables.
- Ramps separating: Ensure the modular interlocking connections are fully engaged. If used on uneven surfaces, the connection might be compromised.
- Ramp حركة: On very smooth or sloped surfaces, the ramp may shift. Consider anchoring options if permanent placement is required (hardware not included).
- انخفاض الرؤية: Clean the yellow sections of the ramp if they become obscured by dirt or mud.
7. المواصفات
| ميزة | مواصفة |
|---|---|
| نموذج | VV-2CGXB-4PCS |
| كمية | 4 جهاز كمبيوتر |
| القنوات | 2 |
| لون | أسود + أصفر |
| مادة | Rubber + PVC |
| سعة الوزن | 11,000 رطل / 4,989 كجم |
| حجم المنتج (الطول × العرض × الارتفاع) | 40'' x 9.7'' x 2'' / 101 x 24.5 x 5 cm |
| Single Channel Size (W x H) | 1.3'' x 1.2'' / 3.2 x 3.1 cm |
| وزن العنصر | 42 pounds (for 4 units) |
| الاستخدام الداخلي والخارجي | داخلي، خارجي |
| نوع التثبيت | Self-Adhesive (Note: This specification might be a misinterpretation from the source data, as these ramps are typically placed or anchored, not self-adhesive. Please verify with product packaging.) |

8. الضمان والدعم
يأتي منتج VEVOR هذا مع ضمان الشركة المصنعة لمدة عامين. For warranty claims or technical support, please refer to the contact information provided with your purchase or visit the official VEVOR webموقع.
For returns, the product is typically eligible for a refund/replacement within 30 days of purchase, subject to the retailer's return policy.