HUAYU Sanju SJ1755HA2B All Metal High Temperature Resistant Fan User Manual

1. انتهى المنتجview

The HUAYU Sanju SJ1755HA2B is an all-metal, high-temperature resistant fan designed for industrial and electronic cooling applications. This fan operates on 220V and is built for durability and reliable performance in demanding environments.

الشكل 1: الجبهة view of the SJ1755HA2B fan, displaying the fan blades and product label.

2. معلومات السلامة

Please read and understand all safety instructions before installing or operating this fan. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• السلامة الكهربائية: تأكد من أن مصدر الطاقة يتوافق مع جهد المروحةtage (220V). Disconnect power before installation, maintenance, or troubleshooting. All wiring should be performed by a qualified electrician in accordance with local electrical codes.
• أجزاء متحركة: Keep fingers, tools, and other objects away from the fan blades during operation. The fan blades rotate at high speed and can cause injury.
• درجة حرارة: This fan is designed for high-temperature environments, but ensure it is not exposed to temperatures exceeding its operational limits.
• التركيب: Securely mount the fan to prevent vibration and accidental dislodgement.

3. الإعداد

Follow these steps for proper installation of the fan:

1. فك التعبئة: Carefully remove the fan from its packaging and inspect for any damage. Do not install if damaged.
2. التركيب: Position the fan in the desired location. Use appropriate screws and fasteners to secure the fan firmly to a stable surface. Ensure adequate clearance around the fan for proper airflow.
3. التوصيلات الكهربائية: Connect the fan's power wires to a 220V AC power source. The fan typically has two wires: one for live (L) and one for neutral (N). Refer to local wiring standards for correct connection. Ensure all connections are secure and insulated.

الشكل 2: العودة view of the SJ1755HA2B fan, illustrating the motor and wiring points.

4. تعليمات التشغيل

Once properly installed and wired, the fan is ready for operation.

• تشغيل الطاقة: Apply 220V AC power to the fan. The fan should begin to rotate immediately.
• إيقاف التشغيل: Disconnect the 220V AC power supply to stop the fan.
• التشغيل المستمر: This fan is designed for continuous operation in suitable environments. Monitor for unusual noises or vibrations during initial operation.

5. الصيانة

تضمن الصيانة الدورية الأداء الأمثل وتطيل عمر المروحة.

• تنظيف: Periodically disconnect power and gently clean the fan blades and housing to remove dust and debris. Use a soft brush or compressed air. Do not use harsh chemicals or liquids that could damage electrical components.
• تقتيش: Regularly inspect the fan for any signs of wear, loose connections, or damage to the blades or housing. Ensure mounting screws remain tight.
• تشحيم: This fan typically uses sealed bearings that do not require lubrication. Do not attempt to lubricate the bearings unless specified by the manufacturer.

6. استكشاف الأخطاء وإصلاحها

If you encounter issues with your fan, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, contact the manufacturer for further assistance.

7. المواصفات

Key technical specifications for the HUAYU Sanju SJ1755HA2B fan:

• رقم الموديل: SJ1755HA2B (also F614R-12MC-IB Cooling fan)
• ماركة: HUAYU
• المجلدtage: 220 فولت
• واتtage: 3.6 واط
• حاضِر: 0.18 أمبير
• مادة: جميع المعادن
• ASIN: B08BR7GD1
• رمز المنتج العالمي: 745895971416

8. الضمان والدعم

This product is covered by the manufacturer's standard warranty. For specific warranty terms, technical support, or service inquiries, please contact HUAYU customer service directly. Keep your purchase receipt as proof of purchase.