Ignis IGT 6100 IT Top-Load Washing Machine User Manual

مقدمة

This manual provides essential information for the safe and efficient use of your new Ignis IGT 6100 IT top-load washing machine. Please read these instructions carefully before installation, operation, or maintenance to ensure optimal performance and to prevent damage to the appliance or injury to yourself. Keep this manual for future reference.

معلومات السلامة

الأمان العام:

• تأكد من أن الجهاز مؤرض بشكل صحيح.
• لا تسمح للأطفال باللعب بالغسالة أو تشغيلها.
• Never force the lid open during operation.
• افصل الجهاز قبل التنظيف أو إجراء أي صيانة.
• لا تقم بتركيب الجهاز في المناطق المعرضة لأشعة الشمس المباشرة أو درجات الحرارة القصوى.
• لا تغسل العناصر التي تم تنظيفها أو غسلها أو نقعها أو تلوثها بمواد قابلة للاشتعال أو متفجرة.

السلامة الكهربائية:

• Use a dedicated power outlet with the correct voltagه والتصنيف الحالي.
• لا تستخدم أسلاك التمديد أو محولات المقابس المتعددة.
• في حالة تلف سلك الطاقة ، يجب استبداله من قبل الشركة المصنعة ، أو وكيل الخدمة التابع لها ، أو الأشخاص المؤهلين بشكل مشابه لتجنب الخطر.

الإعداد والتثبيت

Your Ignis IGT 6100 IT washing machine is designed for freestanding installation. Follow these steps for proper setup.

1. فك التعبئة

Carefully remove all packaging materials, including the polystyrene base and any protective film. Ensure all transport bolts are removed from the rear of the machine before use. Failure to remove these bolts can cause severe vibration and damage during operation.

2. تحديد مستوى

Place the washing machine on a firm, level floor. Adjust the leveling feet at the bottom of the machine to ensure it is stable and perfectly horizontal. This prevents excessive vibration and noise during operation. The appliance dimensions are approximately 40 cm (width) x 60 cm (depth) x 90 cm (height).

This image displays the front of the Ignis IGT 6100 IT washing machine, highlighting its white finish, top-load access, control panel with buttons and a rotary dial, and the Ignis brand logo.

3. توصيل إمدادات المياه

Connect the inlet hose to a cold water tap with a 3/4" thread. Ensure the connection is tight to prevent leaks. Do not use old hoses; always use the new hoses supplied with the appliance.

4. توصيل خرطوم التصريف

Position the drain hose into a standpipe or over the edge of a sink, ensuring it is securely fastened to prevent it from dislodging during the wash cycle. The drain hose should be positioned at a height between 60 cm and 100 cm from the floor.

5 الربط الكهربائي

قم بتوصيل سلك الطاقة بمأخذ كهربائي مؤرض جيدًا. تأكد من أن مستوى الصوتtage and frequency of your power supply match the specifications on the appliance's rating plate. The appliance weighs 54 kg, so ensure the floor can support this weight.

تعليمات التشغيل

1. تحميل الغسيل

Open the top lid and the drum door. Load laundry into the drum, making sure not to overload the machine. The maximum capacity is 6 kg. Close the drum door and then the top lid securely.

2. إضافة المنظفات والمواد المضافة

Pull out the detergent dispenser drawer. Add the appropriate amount of detergent to the main wash compartment and, if desired, fabric softener to its designated compartment. Refer to your detergent packaging for recommended dosages. Close the dispenser drawer.

3. اختيار برنامج الغسيل

Turn the program selector dial (rotary control) to choose the desired wash program based on the fabric type and soil level of your laundry. Use the buttons on the control panel to select additional options such as temperature, spin speed (up to 1000 rpm), or extra rinse, if available for the selected program.

4. بدء دورة الغسيل

اضغط على زر التشغيل/الإيقاف المؤقت لبدء دورة الغسيل. ستمتلئ الغسالة بالماء تلقائيًا وتبدأ البرنامج المحدد.

5. Pausing or Changing a Program

To pause a cycle, press the Start/Pause button. To change a program, first press the Start/Pause button, then turn the program selector to the new program. Press Start/Pause again to resume. Note that changing programs mid-cycle may not be possible or may require draining the water first.

6. نهاية الدورة

Once the wash cycle is complete, the machine will signal with an audible alert or indicator light. Open the top lid and drum door to remove your laundry. Unplug the machine from the power outlet and turn off the water tap after each use.

صيانة

Regular maintenance ensures the longevity and efficient operation of your washing machine. Always unplug the appliance before cleaning.

1. تنظيف الجزء الخارجي

امسح الأسطح الخارجية للجهاز بقطعة قماش ناعمة و...amp لا تستخدم المنظفات الكاشطة أو المذيبات أو المواد الكيميائية القاسية، لأنها قد تؤدي إلى إتلاف الطبقة النهائية.

2. تنظيف موزع المنظفات

Periodically remove the detergent dispenser drawer and rinse it under running water to remove any detergent residue or mold buildup. Use a brush if necessary. Reinsert the drawer once clean.

3. تنظيف فلتر الصرف

Locate the drain filter, usually at the bottom front of the machine. Place a shallow container underneath to catch any residual water. Unscrew the filter cover and carefully remove any lint, coins, or small objects. Clean the filter under running water and screw it back into place securely.

4. تنظيف البراميل

To prevent odors and maintain hygiene, run a maintenance wash cycle periodically. Use a specialized washing machine cleaner or a small amount of white vinegar with an empty drum on a hot wash program.

استكشاف الأخطاء وإصلاحها

قبل الاتصال بخدمة العملاء، راجع الجدول التالي للتعرف على المشكلات الشائعة وحلولها.

تحديد

الضمان والدعم

For information regarding warranty coverage, terms, and conditions, please refer to the separate warranty card provided with your appliance or contact Ignis customer support. Keep your proof of purchase for warranty claims.

For technical assistance, spare parts, or service requests, please contact your local Ignis service center or authorized dealer. You may need to provide the model number (IGT 6100 IT) and serial number of your appliance.