GemRed 82311-00
GemRed Digital Angle Finder Goniometer 82311-00
دليل التعليمات
1. المقدمة
The GemRed Digital Angle Finder Goniometer 82311-00 is a precision instrument designed for accurate measurement of angles. It is particularly useful in fields such as physical therapy, occupational therapy, sports therapy, and rehabilitation programs for determining joint range of motion. This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your device.
2. معلومات السلامة
- Keep the device away from water and excessive moisture to prevent damage to electronic components.
- Avoid dropping the device or subjecting it to strong impacts, which can affect its accuracy and functionality.
- لا تحاول تفكيك الجهاز أو إصلاحه بنفسك. استعن بفنيي صيانة مؤهلين لإجراء أي إصلاحات.
- قم بتخزين الجهاز في مكان نظيف وجاف عند عدم استخدامه.
- The plastic arms are designed with rounded edges for safe contact with skin during measurements.
3. انتهى المنتجview
The GemRed Digital Angle Finder Goniometer 82311-00 features a clear plastic body with two movable arms, a central pivot point, and an integrated digital display for precise angle readings.

الشكل 3.1: الجبهة view of the GemRed Digital Angle Finder Goniometer 82311-00.

Figure 3.2: The large digital display provides clear and easy-to-read angle measurements.
عناصر:
- عرض رقمي: Shows angle measurements with 0.1 degree resolution.
- Movable Arms: Two transparent plastic arms for aligning with the joint or object being measured.
- نقطة المحور: The central axis around which the arms rotate.
- ON/OFF DISPLAY Button: Powers the device on/off and inverts the display reading.
- ZERO HOLD Button: Sets the current position as zero and holds the displayed value.
4. الإعداد
تركيب البطارية:
The device operates on one CR2032 lithium metal battery, which is included. To install or replace the battery:
- حدد موقع غطاء حجرة البطارية في الجزء الخلفي من وحدة العرض الرقمية.
- Use a small screwdriver or coin to gently open the cover.
- قم بإدخال بطارية CR2032 مع توجيه الجانب الموجب (+) لأعلى.
- أعد تركيب غطاء حجرة البطارية، مع التأكد من إغلاقه بإحكام.
5. تعليمات التشغيل
5.1 تشغيل/إيقاف التشغيل
اضغط على تشغيل/إيقاف العرض button to turn the device on. To turn it off, press and hold the تشغيل/إيقاف العرض اضغط على الزر لبضع ثوانٍ حتى تنطفئ الشاشة.
5.2 Zeroing the Measurement
To set a reference point or zero the measurement:
- Position the goniometer arms to the desired starting angle.
- اضغط على ZERO HOLD button. The display will show '0.0' or '0.00', indicating that this position is now the zero reference.
- Subsequent movements will be measured relative to this zero point.

الشكل 5.1: ZERO HOLD button allows you to set a zero reference point and freeze the display value.
5.3 أخذ القياس
To measure an angle:
- تأكد من تشغيل الجهاز.
- Align the fixed arm with one side of the angle you wish to measure.
- Move the adjustable arm to align with the other side of the angle.
- Read the angle directly from the digital display.
5.4 Display Inversion
If the display reading is in an awkward position, you can invert it for easier viewعمل:
- اضغط لفترة وجيزة على تشغيل/إيقاف العرض button. The display will rotate 180 degrees, allowing for comfortable reading from any orientation.

Figure 5.2: Pressing the تشغيل/إيقاف العرض button inverts the screen for optimal viewعمل.
5.5 التطبيق السابقampليه
The goniometer can be used to measure the range of motion for various joints:

الشكل 5.3: مثالamples of measuring angles on the shoulder, knee, and elbow joints.
6. الصيانة
6.1 التنظيف
- امسح الجهاز بقطعة قماش ناعمة وجافة.
- للأوساخ العنيدة، استخدمي القليل من damp قطعة قماش مع صابون خفيف، ثم جففها جيدًا.
- Do not use abrasive cleaners or solvents, as these can damage the plastic and electronic components.
6.2 التخزين
- Store the goniometer in its original packaging or a protective case to prevent scratches and damage.
- احتفظ بالجهاز في بيئة باردة وجافة، بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
- If storing for an extended period, it is recommended to remove the battery to prevent leakage.
7. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| لا يتم تشغيل العرض. | البطارية ميتة أو تم تركيبها بشكل غير صحيح. | Check battery orientation. Replace with a new CR2032 battery. |
| قراءات غير دقيقة. | Device not properly zeroed. Damage to arms or pivot. | Ensure the device is zeroed before measurement. Inspect for physical damage. |
| العرض خافت أو وميض. | انخفاض طاقة البطارية. | استبدل بطارية CR2032. |
8. المواصفات

Figure 8.1: Product dimensions for the GemRed Digital Angle Finder.
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | 82311-00 |
| نطاق القياس | 0-360 درجة |
| دقة | ±0.5 درجة |
| دقة | 0.1 درجة |
| مادة | بلاستيك |
| مصدر الطاقة | بطارية ليثيوم معدنية CR2032 واحدة (مرفقة) |
| أبعاد المنتج (الطول × العرض × الارتفاع) | 33 x 14 x 3 cm (12.5 x 5 x 1.24 inches) |
| وزن العنصر | 105 جرام |
9. الضمان والدعم
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official GemRed webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة وجود أي مطالبات بالضمان.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.