Apps Magic Lantern APP
Overview
- The Magic Lantern is a mobile app that controls the LED lamp belt through apple or Android mobile phone.
- The traditional control ways like infrared, 433MHz, 2.4GHz and others old wired ways will be replaced by mobile phone control way with convenient, powerful and scalable features.
- Through the mobile app, you can easily and quickly control the color, brightness and color temperature of the LED light belt. You can also set various flashing modes, and make the LED light belt move with the music rhythm.
- Just keep the LED light band powered on, turn on the mobile phone Magic Lotus lamp app intelligent control software, connect one or more LED light band controllers through Bluetooth, so as to realize various settings and
- control of multiple LED light bands. Operation is very simple, easy to learn and use.
Features
Adjust color LED strips with 60,000 colors to change color and brightness and adjust monochrome LED stips to change brightness and color temperature Play mobile music or turn on a sound playback device, you can let the light change the color and brightness with the rhythm of music, the music rhythm beautiful Inside multiple setting mode for color change and control LED strips without mobile
- Long distance control with omni-directional antenna, and many-to-many group control mode
- Quick and easy automatic connection
Performance
Magic Lantern APP has good ease of use and compatibility. The actual testing and verification of hundreds of mobile phones is compatible with the current market.
Most smartphones. APP is small and convenient, it consumes less system resources, so the requirements of the mobile configuration are low. Control delay is small, the operation feel good, light control is smooth with people’s visual sense.
Operating Environment
This APP program requires phones of system above Andriod 4.3 and iOS 8.0 Mobile phone configuration is not limited.
Instuctions
Note: Android version and iOS version download and use the same method, here in the Android version as an example.
APP Download
Scan the QR code
iOS and Android systems can download the ” Magic Lantern ” APP by scanning the QR code. Open the browser or other tools with “Scan QR code” function, scan the ” Magic Lantern ” QR code as below:
After the software is installed and downloaded successfully,click apk to install.After the installation is complete,the following style of program icon will appear on the desktop.
App Operation
- Click on the Magic Lantern APP icon, enter the APP page:
- After entering the APP interface, if Bluetooth is not enabled, “Allow Magic Lantem to Bluetooth ?” Click [Allow]
- switch to color and brightness interface:
- click to show the lamp list, view lamp list:
- Click to RGB manual adjustment view:
- switch to the mode interface:
- switch to the music rhythm interface:
- Switch to the microphone rhythm interface:
- Switch to the timing interface:
- Switch to the modify pin sequence interface:
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Documents / Resources
 | Magic Lantern APP |
 | Magic Lantern App |
 | Magic Lantern App |
 | Magic Lantern APP |
 | Magic Lantern App |
References
- User Manualmanual.tools
Hello, I just bought the lamp in the double pack, I started it and tried a few colour combination. I left it then on white ( by the way, it’s quite pale, you can’t read with it), it worked a while, now it only blinks , no matter what I do, even if it’s disconnected from the power. What to do ?
Why is my Magic Lantern lamp blinking and how can I fix it?
Based on the Magic Lantern APP manual and common troubleshooting for these LED controllers, here are the steps to address the blinking issue:
If the lamp continues to blink rapidly while disconnected from power, there may be a hardware defect in the controller or power adapter of your specific double pack unit.
Read the full Q&A page
magic lantern not appear my blotooth .how can i do?
Why is the Magic Lantern device not appearing in my Bluetooth list?
If your Magic Lantern device is not appearing in your Bluetooth list, please follow these troubleshooting steps based on the user manual:
Read the full Q&A page
Why no RWB combinations? C’mon man!
Why are there no Red-White-Blue (RWB) color combinations available in the Magic Lantern app?
The Magic Lantern app provides several ways to customize colors if a specific preset like RWB is not immediately visible in the standard list. Based on the manual, you can try the following to achieve your desired combination:
If a dedicated RWB "patriotic" mode is missing from the preset list, it may be a limitation of the current software version, but you can often simulate it using the manual RGB settings or by cycling through the available multi-color jump/flash modes.
Read the full Q&A page
is there anyway to get the lights to flash red white and blue
How can I set the lights to flash red, white, and blue using the Magic Lantern app?
To set specific flashing patterns in the Magic Lantern app, follow these steps:
If your light set came with the LED2022-24KEY remote control, you can also try pressing the FLASH or SMOOTH buttons to cycle through preset color sequences, though the app provides more granular control over the 60,000 available colors.
Read the full Q&A page
I broke my remote for my magic lantern lite device I have the magic lantern app on my tablet can I use it to turn the lite on and off
Can I use the Magic Lantern app to turn my Magic Lantern Lite device on and off if my remote is broken?
Yes, you can use the Magic Lantern app on your tablet to turn your device on and off. The app is designed specifically to replace traditional control methods like infrared remotes.
To control your device using the app, follow these steps:
Additionally, the app allows you to set Timing schedules to automatically turn the lights on or off at specific times, which can be found in the "Schedule" tab at the bottom of the interface.
Read the full Q&A page
How do I switch the lights on and off using a Magic Lantern App mobile app?
How do I switch the lights on and off using the Magic Lantern App mobile app?
To switch the lights on and off using the Magic Lantern App, follow these steps:
This button is typically located near the top right of the color adjustment screen, as shown in the manual's illustrations.
Read the full Q&A page