InBody App User Guide

InBody App

Overview

Use the InBody app to create an account, then register and pair your InBody Dial H40 for automatic syncing of measurement results.

Quick Setup & Use

1. Install the InBody app from the App Store or Google Play Store.
2. Open the app and select Registration.
3. Enter your mobile number and email address, then complete email verification.
4. Check your inbox for the verification email, enter the code in the app, and select Verify.
5. Register your details in order: password, date of birth, gender, height, then select Next.
6. Agree to the handling of personal data, return to the first screen, and log in using your mobile number and password.
7. On your smartphone, ensure Bluetooth is enabled.
8. Register the device when the device registration screen appears by selecting [InBody Dial H40].
9. Turn on the InBody Dial, bring it close to your smartphone, and proceed with pairing.
10. Enter your user code and select [Confirm].
11. After setting up a Wi‑Fi connection, results sync to the app automatically; then start taking measurements.

Account Registration and Device Registration

STEP1. Create Your Account. If verification cannot be completed, please contact our customer center.
Contact form: eu.inbodyshop.com/pages/contact-us

1. Install the InBody app from the App Store or Google Play Store.
2. Open the installed app and select “Registration”.
3. Enter your mobile number and email address, then complete email verification. Carrier email addresses may not receive the message. Please try a different address.
4. Open your inbox and check that the verification email has arrived. Enter the code in the app and select “Verify”.
5. Register your details in order: password, date of birth, gender, height. Then select “Next”.
6. Once you agree to the handling of personal data, you will return to the first screen. Log in with the mobile number and password you registered.
   STEP2. Register Your Device To link the InBody app with the InBody Dial H40, Bluetooth must be enabled on your smartphone.
7. After registering your details, the device registration screen appears. Select [InBody Dial H40].
8. Turn on the InBody Dial and check that Bluetooth is enabled on your smartphone.
9. Bring the InBody Dial and your smartphone close together to set up pairing.
10. Enter your user code and select [Confirm].
11. Once you set up a Wi-Fi connection, your results sync to the app automatically.
12. Once registration is complete, you can start taking measurements.