D-SERIES
HIGH BRIGHTNESS
FIXED INSTALL PROJECTOR
Excellent Performance Incredible Value
| • Superior Picture Quality • Easy to Install | • Cinema Level Reliability • WUXGA Resolution | • 4G Module/Wireless Control • APCS Platform |
Best Value 1- Chip DLP Laser Installation Projector
- The Signature ALPD Engine
- 7,300 – 9,300 lumens
- New User-Friendly OSD
- Internal 4G Module
- Red ratio above 10% to provide high saturation colors:
- Coverage beyond Rec 709. More accurate and stable color rendition
Red coordinates deviates from Rec. 709 , orangish red
Excellent Performance in Installations
- Optional Lenses:
Added two short-throw optional lenses to adapt to installations in smaller spaces.
- Multi-color correction provides color/brightness uniformity for any blended pictures:
With RGBYCMW seven-axis color correction users can easily adjust the pictures to reach the desired uniformity.
- APCS (Appotronics Projectors Control System)
– Projector O&M, monitoring and interconnection management platform
– Free APP for computer, tablet and phone
– Management and monitor on cloud platform or app - Wide Range Manual Lens Shift
H & V manual lens shift at ±40% (vertical) and +100%, -60% (horizontal).
- All products support 3D
Support infrared 3D and DLP-link 3D.
Cinema Level Reliability
- Fully sealed optical engine with filter-free anti-dust structure IP5X level sealed optical engine from the light source to the core display chip area.
- The all-new patented inner loop color-wheel cooling system
SPECIFICATIONS
| Model | AL-DU735A | AL-DU835A | AL-DU935A | |
| Display Technology | DLP™x1, DLP™ projection system | |||
| Panel Size | 0.67″DMD | |||
| Resolution | 1,920x 1,200, WUXGA | |||
| Brightness Output1 | 7,300Im/7,600Im (Center) | 8,300lm/8,600Im (Center) | 9,000Im/9,300Im (Center) | |
| Light Source Type | ALPD® Laser | |||
| Life Source Lifetime6 | 20.000h | |||
| Contrast2 | 100,600 :1 | |||
| Uniformity | 90% | |||
| Display Gamut | REC.709 | |||
| Lens Throw Ratio | Powered lenses 0.62:1, 0.8:1, 1.23-1.97:1 | |||
| screen Size | 80″ ~ 300″ | |||
| Geometric Correction | H+V: ±35°, 4-corner keystone | |||
| Optical Axis Shift | Verticals down 100%, up 60%: Horizontal: ±40%, powered | |||
| Input Resolution | 1,920×1,200 | |||
| I/0 | DVI x 1/HDMI x 2/VGA x 1/RS232 x 1/M3x1/RJ45x1/USB x 1/IR 3D out x 1 | |||
| Power Supply | 100-240V AC, 50/60Hz | |||
| Power Consumption | Standard | ≤ 500W | ≤ 550W | ≤ 600W |
| Stand by | <0.5W | |||
| Orientation | 360° installation | |||
| Noise | 35dB (standard mode) | |||
| Structure | Measurements3 | 19.3″ x 13.9″ x 6.3″ | ||
| Weight4 | ≤ 28.7 lbs | ≤ 30.9 lbs | ≤ 30.9 lbs | |
| Orientation | Temperature5 | 32°F~104°F (95°F~104°F ECO mode)C | ||
| Humidity | 20%~80% (no condensation) | |||
1 Based on 15021118 standard. 2 Full white/full black. 3 Not including protruding parts. 4 Including standard lens. Average value. 5 Operation temperature will be set to 32°F~95°F when working under High Altitude Mode. Output of projector will be reduced to 50% if ambient temperature exceeds 95°F. 6 The output of the projector will have decreased by approximately 50% around this time. Data from accelerated lab simulations. Actualtime may vary according to the operating modes, environment and other user behaviors.
I/O & Dimensions
Documents / Resources
 | APPOTRONICS D-SERIES High Brightness Fixed Projector [pdf] Instructions D-SERIES High Brightness Fixed Projector, D-SERIES, High Brightness Fixed Projector, Brightness Fixed Projector, Fixed Projector, Projector |