A19 Motion Sensor Light Bulb
User Manual
Model꞉ QP6012SA
Features
- Built‑in PIR Sensor꞉
· The motion sensor light bulb is equipped with a Passive Infrared (PIR) sensor that detects human or animal movement within its detection area.
· Upon detecting movement, the bulb will automatically turn on, and it will turn off automatically after 30‑45 seconds when no motion is detected. - Built‑in Light Sensor꞉
· To enhance energy efficiency, the light bulb features a built‑in light sensor.
· During the daytime or when the ambient light intensity exceeds 30 lux, the light remains off.
· In low‑light conditions such as dusk or when the light intensity is below 15 lux, the bulb will automatically turn on when motion is detected. - Detection Range/Distance꞉
· The sensor has a wide detection angle of 120 degrees, covering a distance of 23FT(Max.). - Working Temperature꞉
· The motion sensor light bulb is suitable for operation in temperatures ranging from ‑4°F and 104°F (‑20°C and 40°C)
Important Note
- Keep the switch in the “on” position at all times.
- Maintain a minimum distance of 3 meters between two sensor bulbs to prevent interference between them.
- Avoid enclosed fixtures; ensure sensor faces downward and remains unobstructed, even with transparent cover.
Support꞉ Please send email to Aovpex@163.com if you encounter any issue.
Documents / Resources
 | Aovpex QP6012SA A19 Motion Sensor Light Bulb [pdf] User Manual QP6012SA A19 Motion Sensor Light Bulb, QP6012SA, A19 Motion Sensor Light Bulb, Sensor Light Bulb, Light Bulb |