M02010167 3D Printer
“
Product Information
Specifications
- Name: Lienco SAS
- Address: 8 Rue Marcel Cerdan, 77600, Bussy
Saint Georges, France - Contact: Ruoyu ZHANG
- Telephone: 0033766929910
- Email: contact@lienco.eu
Product Usage Instructions
Installation
1. Unpack the product and ensure all components are
included.
2. Locate a suitable area for installation, ensuring proper
ventilation.
3. Connect the product to a power source following the provided
instructions.
Operation
1. Power on the product using the designated button or
switch.
2. Follow the on-screen instructions or refer to the manual for
specific functionalities.
3. Adjust settings as needed to suit your preferences.
Maintenance
1. Regularly clean the product using a soft cloth and mild
cleaning solution.
2. Check for any loose connections or parts and tighten if
necessary.
3. Refer to the maintenance section of the manual for detailed
upkeep procedures.
Troubleshooting
If you encounter any issues with the product, refer to the
troubleshooting guide in the manual or contact customer support for
assistance.
Frequently Asked Questions (FAQ)
Q: How do I reset the product to factory settings?
A: To reset the product, locate the reset button on the device
and hold it down for 10 seconds until you see the reset
confirmation.
Q: What should I do if the product stops working suddenly?
A: Check the power source, connections, and ensure proper
ventilation. If the issue persists, contact customer support for
further assistance.
“`
I
Name:Lienco SAS Add:8 Rue Marcel Cerdan, 77600, Bussy Saint Georges, France Contact:Ruoyu ZHANG
Tel:0033766929910
E-Mail:contact@lienco.eu
I
Name:WSJ PRODUCT LTD Add:Unit 1, Alsop Arcade, Brownlow Hill, Liverpool L3 STX Contact:Michael
Tel:+44 1519470193
E-Mail:info@wsj-product.com
AN,c:umc:
11
I111111 11 1 M02010167
Documents / Resources
 | ANYCUBIC M02010167 3D Printer [pdf] User Manual 2BOQB-K3MAX, 2BOQBK3MAX, M02010167 3D Printer, M02010167, 3D Printer, Printer |