ANTOP logo

ANTOP AT-132B Paper Thin Indoor TV Antenna with Smartpass Amplifier and Filter

ANTOP AT-132B Paper Thin Indoor TV Antenna with Smartpass Amplifier and Filter


Your Paper Thin Indoor HDTV TV Antenna with Smartpass Amplified and 4G LTE Filter / AT-132B can be used anywhere indoors: at Home or even with your Mobile Home/RV. ANTOP’s New Generation Digital Technology allows you the flexibility to set up your antenna in various locations and still receive a great digital reception.
ANTOP’s New Generation Digital Technology

  • Smartpass Amplifier: all-in-one low-noise design allows easier connection, delivers correct balance between short and long range reception.
  • 4G LTE Filter: blocks 3G and 4G wireless signals to ensure noise-free digital TV reception.

Following are instructions for indoor installation. Read through all instructions prior to begin­ning installation procedure.


Connect the coaxial cable attached to the antenna to the ANTENNA/CABLE IN connector on the back of the TV or converter box. Connect the USB cable between the DC socket in the Smartpass Amplifier and an open USB port with DC SV output on the back of the TV. If the TV does not have a USB port with DC SV output, use the included power adapter to power the Smartpass Amplifier via wall outlet.


Connecting 2

Setting and Scanning

In the TV’s setup menu, set the mode to “Antenna” or “Air’: then, set TV to “Scan” for channels. Consult the TV manual for detailed instructions.Setting

Locating and Placing

Test the antenna in multiple locations to find the best one before mounting the antenna. A high location or positioning the antenna toward the broadcast tower may result in better reception.Diagram 1


Secure the antenna with the provided double sided sticker on any non-metallic structure, or with the double sided suction cup on smooth surface.


Customers should first contact their place of purchase to determine the reseller’s warranty policy. Antop Antenna’s warranty will take effect after the expiration of reseller’s policy. Antop Antenna, warrants its products for a period of one (1) year from the original date of purchase. Warranty is valid only with proof of purchase. Warranty does not apply to defects or failures of the product caused by; neglect, misuse, negligence, accident, abuse, mishandling, misapplication, alteration, modification, power outage, unauthorized/ unreasonable use, or any uncontrollable environmental damage.


For any return, customers should first contact their place of purchase to determine the reseller’s return policy. A Return Material Authorization (RMA) number must be obtained in advance by contacting Antop Antenna customer service via e-mail or telephone. Merchandise returned to Antop Antenna must have a RMA number displayed on the box and a copy of your proof of purchase inside the package. Absolutely no refund after 30 days of purchase from Antop Antenna. A restocking fee of 15% will be deducted from any refund, ask representative for further details. Refund policy for US & Canada customers only.


For any exchange or replacement, customers should first contact their place of purchase to determine the reseller’s policies. No upgrades or exchanges for different models or SKU’s. One (1) Year limited manufacturer’s warranty for exchange of product due to malfunction, failure or defect, missing parts or components. Exchanges will be for the same item, model and/or SKU, within one (1) year of original purchase date. A Return Material Authorization (RMA) number must be issued by Antop Antenna prior to returning any product or part. To obtain an RMA, contact Antop Antenna via email or telephone.


Customer will be responsible for shipping costs of merchandise sent to Antop Antenna. Please consult a customer service representative for details. When shipping any item to Antop Antenna, please consider using a trackable shipping method. Antop Antenna cannot be held responsible for lost or misdirected shipments. Exchanged and returned products must be sent to: Antop Antenna, RMA Department,1650 S. Balboa Ave, Ontario, California 91761. To receive a Return Material Authorization from Antop Antenna please send your request to RMA Dept: [email protected] or to speak to Customer Service: Via telephone, M-F, 9am to 5pm (PST) 909-947-8883.

ANTOP logo
Tel. 909.947.8883 I Email: [email protected]

Leave a comment

Your email address will not be published.