anslut logo

Item no. 016210

BATTERY-POWERED WORK LAMP LED

anslut 016210 Battery Powered Work Lamp LED

OPERATING INSTRUCTIONS
warning 4 Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)

Care for the environment!
Recycle discarded products in accordance with local regulations. Jula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com

anslut 016210 Battery Powered Work Lamp LED - parts

SAFETY INSTRUCTIONS

  • Do not look directly into the work lamp when it is switched on. Never point the beam at the eyes of people or animals.
  • Keep out of the reach of children.
  • The product can be used indoors and outdoors, but must not be immersed in water or any other liquid.
  • Do not charge the product outdoors.
  • The switch must be in the off position when charging, otherwise, the product can be damaged.
  • Do not cover the product when in use.
  • Always unplug the charger and allow the product to cool before cleaning, or maintenance, and to reduce the risk of electric shock.
  • Do not attempt to replace the integrated battery.
  • The light source is not replaceable. Discard the product if the light source stops working.
  • Do not use the product if the glass front is cracked or damaged. The product must be discarded if the glass front is cracked or damaged.
  • Do not open or dismantle the product. The product does not have any parts that can be repaired by the user.
  • Charge the battery as soon as possible after it has been discharged for the best functionality and life span.
  • Do not touch the product until it has cooled.
  • Keep the product at a safe distance from flammable materials and/or flammable surfaces.
  • Make sure there is adequate ventilation to prevent overheating.

SYMBOLS

CE SYMBOL

Approved in accordance with the relevant directives.
anslut 016210 Battery Powered Work Lamp LED - iconDo not use the product if the glass front is cracked or damaged.
Dustbin IconRecycle discarded products as electrical waste.

TECHNICAL DATA

Output9 W
Battery3.7 V Li-Ion
Luminous flux700 I’m
Color temperature4000 K
Diffusion angle120°
Safety classII
Protection ratingIP54
Battery capacity2000 mAh
Battery life2 h
Charging time4 h
Ambient temperature-5 — 40°C
Charging current, USB port5 VDC, 1 A

DESCRIPTION

  1. Carry handle
  2. Charging connector
  3. Controls
  4. Power switch
    FIG. 1

USE

  • The battery must be fully charged before using the product for the first time.
  • Charge the battery immediately when it becomes discharged.
  • To avoid the battery becoming completely discharged, recharge it every three months even when the product is not in use.

MAINTENANCE

Wipe the product with a dry, soft cloth when necessary.

STORAGE
  • Store the product out of the reach of children, in a stable and safe position, cool and dry. Avoid very hot or low temperatures.
  • Protect the product from direct sunlight. If possible, store the product in the dark.
  • Do not store the product in a plastic bag, this can cause the accumulation of moisture and damage the product.

Dustbin Icon

JULA AB, BOX 363, SE-532 24 SKARA
2022-02-03
©Jula AB

Documents / Resources

anslut 016210 Battery-Powered Work Lamp LED [pdf] Instruction Manual
016210, Battery-Powered Work Lamp LED

References

Leave a comment

Your email address will not be published. Required fields are marked *