Anpviz WP-245-W Camera 2.4G Wireless WiFi Security Camera
INTRODUCTION
Thanks for you choosing Anpviz wireless network security camera. This manual applies to the PTZ/Bullet/Dome IP Cameras. Please download the correct PC software from the following link: https://anpvizsecurity.com/download/u-easy-camhi-series_c0096 Hotspot distribution network and wired distribution network operation video, please scan the code and click the QR code below to view:
General Introduction
The Anpviz cam hi series security cameras consists of various indoor and outdoor cameras wilh different shapes and functions. Users can monitor multiple security cameras on the same device. Anpvlz cam hi series security cameras support Android and 10S smartphones as well as tablets, Windows PC and Mac. All security cameras are equipped with LAN ports and support wired connections.
Setting up tha Hcurlty camera
The security camera starts operating immediately after the power Is switched on. We recommend you connect the security camera to your mobile device or PC; in that case, you can access the security camera more easily. There are 3 ways to add and manage the camera: using the mobile phone APP, PC software or the PC browser
Product Introduction
This is a network camera for security surveillance, It is connected to the Internet through network cable or Wi-Fi for data transmission and reception, you can use it to remotely watch realtime images on mobile phone and computer anytime anywhere, it can save video in the Micro SD card or computer, you can set motion detection and humanoid detection alarm on the camera, when the alarm is triggered, the camera can send email, push phone message, and make alarm sound, and other more functions.
Product List
- IP Camera
- 12V Power Adapter
- Quick Start Guide
- Installation Accessories
- Network cable (Some models include)
Product Precautions
The proper environment temperature for this camera range from -20℃ to 50℃, Please avoid exposing it to too much hotter or colder environment. When installing the camera, please protect the camera’s interface cable and power supply, please make sure they cannot be short-circuited or be lengthened. For better user experience, please keep the front and both sides of the camera lens away from objects reflective as glass, white wall etc, so that the picture function well without overexposure. Make sure the camera has been placed in areas of good signal of the Wi-Fi, set it up away from somewhere might jamming signal as metal or microwave oven. If it is a PTZ rotation-type camera, do not twist the camera to force it to rotate, if you need to adjust the monitoring orientation, you can adjust it through the PT function of the mobile APP or computer.
- Install the quick assembly block according to the hole position
- Align the bottom of the camera and rotate it to the right
- Speaker
- DC 12V Power Port
- LAN Port
- Reset Button
- WIFI Antenna
- Unscrew the screw to open the camera mask
- Find the SD card slot and insert the SD card
- If the purchased camera already has an SD card installed,there is no need to disassemble the camera to install it.
Install It Quickly 
Add camera to mobile phone app
DawnloadApp
Download ·camHiPro· or ·cam Hi” from Google Play Store I Apple App Store or scan the QR code below to get APP information. ComHlproAndrold opp ComHlpro 10S opp (m
Add a camera to App
Method 1: Configure the network via hotspot Connect the camera to the power supply and place the camera near the mobile device and router.Connect the iPhone to the camera”s wifi hotspot
Open the APP “CamHiPro” and follow the steps below:
Note When the Wi-Fi connection is successful, you will hear the sound “ding…” from camera, if not, please check your Wi-Fi password and reconfigure.
Android phone
Open the “CamHipro” app, chick add icon “+”, and follow the steps prompted by the app, follow the steps below:
Note: After successfully connecting to the hots pot of the camera, the Android phone may indicate that the network cannot be connected to the Internet. If you want to continue connecting, please click Always connect to this camera hotspot network. Return to the campo interface and follow the steps
Method 2: Connect camera with network cable
Connect the power and network cable to the camera, make sure the network cable is connected to your router and can connect to the Internet through the router, and your phone is also connected to the router’s Wi-Fi.
Open the APP and click “Add Camera”-“IP camera”-“New device”- “Power is on, next step”until “Confirm access network cable” page, then follow the steps below:
APP Preview and function introduction
- Camera network status
- Display Mode
- Add
- name
- Camera UID
- SD card video playback and backup
- Local video files and pictures
- Camera SettingClick the online camera picture to view
The function that corresponds to the APP icon.
Install Micro SD Card and Record Settings
Install the SD card to the camera, and check the status of the SD card.
Set alarm push and alarm recording
Record playback
Watch on Computer
“Search tool”
Install the “Search tool” from CamHi lP camera product information you can download it at https://anpvizsecurity.com/download/u-easy-amhi-series_c0096
Web access
Double-click the camera in the search tool to open the browser to visit the camera.
HiP2P Client” multi-channel management client
Install the “HiP2P Client” client, you can find instalation file and instructions in CamHi IP camera product information.
Run the client, the administrator password is empty by default, enter the “Config” page, click “Search” to find the cameras in the LAN and add them, or click “Input UiD” to add the other remote cameras, you can ind the camera’s UD serial number on the label.
After adding the camera, double-click the camera to watch the live video.
FAQ
Q: forget your password?
A:lf you forget the password, please reset the camera through the reset button of the camera, press and hold the reset button of the camera for about 15-20s, hear the sound of dong from the camera, then release the button and wait for the camera to reset Successtully.
Q: Wi-Fi configuration failed?
Check whether the Wi-Fi signal is sufficient, the Wi-Fi name and password are correct, the Wi-Fi name and password must be in English characters, the Wi-Fi password length cannot exceed 31 characters.
Q: The device list is prompted the camera is offline?
Please make sure your phone can be connected to the Internet, the camera s wired/Wi-Fi connection is correct and can be conne cted to the Internet, If the camera is connected Wi-Fi, whether the Wi-Fi signal of the camera installation location is sufficient, check whether the Wi-Fi name or password has been changed.
Q: Live video is very stuck, even the camera shows offline?
Please make sure that the internet connection of the phone and the camera is good, stable and at least 2Mbps, if the camera is connected Wi-Fi, make sure that the signal at the installation location is sufficient.
Q: What should I do if the mobile APP does not receive the push?
Please check if the alarm push is turned on and the alarm settings are correct(Setting- Alarm management and notification), whether the APP allows push permission on the mobile phone.
Q: When playback video can not find video files ?
Please check whether the SD card is installed in the camera, whether the SD card is damaged, and whether the time zone of the camera is correct
Press the Home or Menu button on your camera. Open Settings, then WiFi Setup or WiFi Options, if applicable. Make sure your camera’s WiFi connection is turned on. Your camera may automatically connect to your WiFi network. … Enter your WiFi network’s password.
The answer is yes! Your IP cameras without routers will be ready to record locally when you connect them to PCs or use a whole NVR kit
Without WiFi, your camera won’t be able to send your phone motion notifications and you won’t be able to live stream video on your phone. Some cameras will allow you to use a data plan to access these features instead of WiFi. Data is more secure.
Check the several reasons why your security cameras working over network (IP cameras) are not working on WiFi. The antennas of the WiFi IP camera are not fixed well – the antennas are loose. Your wireless IP camera does not have power supply. You enter the wrong login password
Make sure to check that all connections, cables, and power is intact and tightly connected. If your security cameras are wireless, check the internet and make sure that it is connected successfully to the WiFi. You can also check if the router is properly working.
Our four top-rated no-monthly-fee home security systems are SimpliSafe, abode, Ring, and Arlo. Do no-monthly-fee security systems offer video recording? They all offer real-time viewing for free, but most require a monthly fee for video recording
If a wired security camera is connected to a DVR or other storage device, then it does not need a wifi connection to function. Additionally, many cameras support mobile LTE data, so this can be used as an alternative to wifi so long as you have a mobile data plan.
Don’t place a wireless camera too far away from the main hub or wireless router. If there’s a direct line of sight, a wireless camera’s range may reach up to 500 feet or more. Within a house, the range is usually lower—around 150 feet—though not always.
Surveillance cameras use digital signals to transmit recorded video to a NVR via a single cable, eliminating the need for multiple power cables. Security cameras, however, require cabling to transmit video feeds to a limited number of monitors, and the cameras must be strategically placed in a single location.
Many security camera manufacturers have been using these AI-driven features to entice consumers into paying for a subscription. But there are still plenty of security cameras without a subscription that will offer at least one of these intelligent features (usually person detection) for no extra charge.
