anko-logo

anko 43190454 Bluetooth Light up Party Speaker

anko-43190454-Bluetooth-Light-up-Party-Speaker-product

Please read all instructions carefully and keep for future use.

Important Precautions

  1. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
  2. Minimum distances of 100 cm around the apparatus for sufficient ventilation.
  3. The ventilation should not be impeded by covering the ventilation opening with items, such as newspapers, tablecloths, or curtains.
  4. No naked flame sources such as lighted candles should be placed on the apparatus.
  5. When the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
  6. Working temperature:-10℃~+45℃.
  7. The use of apparatus in moderate climates.
  8. Do not use this apparatus near the water.

Avoids to use of battery in the following conditions

  1. Attention should be drawn to the environmental aspects of battery disposal.
  2. The battery cannot be subjected to high or low extreme temperatures, or low air pressure at high altitudes during use, storage, or transportation.
  3. Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
  4. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
  5. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
  6. A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
  7. Batteries shall not be exposed to excessive heat such as sunshine, fire, or the like.
  8. The internal battery is non-user-replaceable.

Product Specification

  • Charging input rating: 5V 1A
  • Charging time: 3 Hours
  • Playback time at 50% volume: 2 Hours
  • Power: 5W
  • Speaker: 2.5 Inch
  • FM Radio: 87.5-108MHz
  • AUX In: 3.5mm

Product Feature

  • Multi-color lights for choosing.
  • Bluetooth version 5.0, is compatible with all audio devices with Bluetooth functions, such as MP3/4, mobile, computer, and iPad.
  • Built-in rechargeable lithium battery

Function Introduction

anko-43190454-Bluetooth-Light-up-Party-Speaker-fig- (1)

Charging the Speaker

The speaker comes with a built-in rechargeable, follow the below steps to charge it:

  1. Plug the end of the USB charging cable (included) with the USB charger (not included) into the DC 5V input slot, another end plugs into a wall outlet to start charging.
  2. The battery indicator will show RED on the back and turn off when fully charged.
  3. When the speaker battery is lower power, a tone will be heard indicating that need to charge.

Powering ON/OFF

  1. Make sure that the speaker has been charged.
  2. Long press the [anko-43190454-Bluetooth-Light-up-Party-Speaker-fig- (2) ] button to power on the speaker.
  3. The speaker will enter Bluetooth pairing mode, and will automatically re-pair to any nearby, previously paired device.
  4. Long press the [anko-43190454-Bluetooth-Light-up-Party-Speaker-fig- (2) ] button to power off the speaker.

Switching the Speaker Light Effects

  1. The light effects will automatically turn on when the speaker is powered on.
  2. Long press the [ M ] button on the top of the speaker to switch the light effects and turn the light effects off.

Adjusting Volume & Playback

  1. Long press the [ + / – ] button on the speaker to adjust the volume.
  2. Short press the [ + / – ] button on the speaker to the next or previous track.
  3. Press the [anko-43190454-Bluetooth-Light-up-Party-Speaker-fig- (3) ] button to pause and resume playback.

Playing the USB or TF Card

  1. Insert a USB or TF card into the corresponding slot on the speaker.
  2. Press the [ + / – ] and [anko-43190454-Bluetooth-Light-up-Party-Speaker-fig- (3) ] buttons on the speaker to control the tracks of the USB or TF card.

Using the FM Radio

Notes:
The USB charging cable is the same as the FM antenna cable, please make sure the USB charging cable plug into the DC input port to ensure has a good signal during the scanning.

  1. Power on the speaker and switch to FM mode. A voice will be heard from the speaker.
  2. Long press the [anko-43190454-Bluetooth-Light-up-Party-Speaker-fig- (3) ] button to start scanning and saving available stations, which will turn into the first saved station after finishing the scanning.
  3. Press the [ + / – ] buttons to switch to the next or previous of the saved stations.anko-43190454-Bluetooth-Light-up-Party-Speaker-fig- (4)

Connecting to an AUX Device

  1. Insert one connector of 3.5mm auxiliary cable (included) into the 3.5mm
    Aux input jack on the back of the speaker. Insert the other connector into the headphone jack or audio output jack of your media-playing device.
  2. In AUX mode, all playback will be controlled by your connected device.

Connecting with Bluetooth

  1. Power on the speaker and switch to Bluetooth mode. A voice will be heard from the speaker.
  2. Open Bluetooth on your mobile device and search Bluetooth name 43190454 to pair.
  3. In Bluetooth mode, playback and volume can be controlled by your paired device or the controls on the top of the speaker.

TWS Connecting
This speaker supports the TWS pairing function, please buy two same speakers to enjoy this function.

  1. Long press the [anko-43190454-Bluetooth-Light-up-Party-Speaker-fig- (5) ] button on two speakers to turn on the TWS function, there is a tone from both speakers separately.
  2. The TWS will pair automatically once both speakers turn on the TWS function and there is the same tone from both speakers once paired successfully.
  3. Long press the volume knob on the top of any speaker to increase or decrease the music volume.
  4. If not using the TWS function, please long press [anko-43190454-Bluetooth-Light-up-Party-Speaker-fig- (5) ] to disconnect TWS.

Phone Calling

When the speaker is connected with Bluetooth, you can take phone calls using the buttons on the speaker and talk through the built-in microphone.

  1. Press the [anko-43190454-Bluetooth-Light-up-Party-Speaker-fig- (3) ] button to answer an incoming call.
  2. Press the [anko-43190454-Bluetooth-Light-up-Party-Speaker-fig- (3) ] button again to end the call.

12-Month Warranty

Thank you for your purchase from Kmart.

Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above. from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is, in addition, fo your rights under the Australian Consumer Law.

Kmart will provide you with your choice of a refund, repair, or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, or neglect.

Please retain your receipt as proof of purchase and contact our Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help at Kmart.com.au for any difficulties with your product. Warranty claims and claims for expenses incurred in returning this product can be addressed to our Customer Service Centre at 690p Springvale Rd, Mulgrave Vic 3170.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.

Documents / Resources

anko 43190454 Bluetooth Light up Party Speaker [pdf] Instruction Manual
43190454, Bluetooth Light up Party Speaker, Light up Party Speaker, Bluetooth Party Speaker, Party Speaker, Speaker

Leave a comment

Your email address will not be published. Required fields are marked *