anko - logo

Instruction manual
Battery Power Pack for PS5 Controller
Keycode: 43055807

Safety instructions:

  1. Use a soft, dry cloth to clean the product. Do not use solvents or other chemicals.
  2. Do not wipe with a chemically-treated cleaning cloth.
  3. Do not place the Charging Stand direct to sunlight or a high temperature and humid place.
  4. Do not disassemble the charging stand.
  5. Do not touch the product with wet hands.
  6. Do not throw or drop the product or subject it to strong physical shock.
  7. Do not touch the ports or insert any foreign objects into the product.
  8. Keep the product out of the reach of small children because small children may swallow small parts or may wrap the cables around themselves, which may inflict injury or cause an accident or a malfunction.

Features:

anko 43055807 Battery Power Pack for PS5 Controller

Standby mode:

  1. When the battery pack is in standby mode, short press the power button, the LED indicator light will display the battery level.
  2. Long press the power button 3s to turn off the power pack or wait for the 30s, the power pack will turn off automatically.

Charging the power pack:

  1. Connecting a USB power adapter (not included) with DC 5V /1A will be required.
  2. Connect the USBC cable (Included) to the power pack.
  3. When charging successfully, the number of always-on LED indicator lights for electric quantity represents the battery capacity of the battery pack, and the remaining LED lights will flash/twinkle.
  4. After the battery pack is fully charged, four LED indicator lights will not turn off until the 5V/1A adapter is plugged out.
    Note: Do not charge the PS5 controller while charging the battery pack.

Charging the PS5 Controller:

  1. Plug the controller into the battery pack, the LED indicator light will display the battery capacity.
  2. When the battery capacity is lower than 10%, the LED indicator light will flash.
  3. After the PS5 controller is fully charged by the battery pack, the battery pack will stop discharging, remove the power pack.

Package Include:

1 x Powerpack for PS5 Controller
1 x USBC cable
1 x User manual

Specification:

Input Voltage: DC 5V/1A
Output Voltage: DC 5V/600mAh
Built-in battery: 3.7V/ 1500mAh

Documents / Resources

anko 43055807 Battery Power Pack for PS5 Controller [pdf] Instruction Manual
43055807, Battery Power Pack for PS5 Controller

Leave a comment

Your email address will not be published.