Categories: Anker

ANKER ‎AK-98ANWVM-UBA Vertical Mouse User Manual

ANKER ‎AK-98ANWVM-UBA Vertical Mouse

Thank you for choosing this special wired vertical mouse. Please read the user manual carefully when using this product.

Button Function

  1. Left-click
  2. Scroll wheel
  3. Right-click
  4. Forward
  5. Backward
  6. DPI cycle {on bottom)
  7. ON/OFF button {on bottom)

Features

  • Vertical mouse, worm bionic shape design
  • The floating RGB light effect provides with different experience
  • Ergonomic design with the removable palm rest, to reduce the hand and wrist pain

Installation

Plug the USB connector for the wired mouse to the USB port in your computer, after detecting successfully it will work normally.

Specification

  • Solution PAN3212
  • Version Wired
  • Light Mode Floating RGB. ON/OFF switch is on the
  • is on the bottom.
  • DPI 800/1200/1600/2400/4000 DPI,
  • DPI cycle is on the bottom of the mouse
  • Polling Rate S00Hz
  • Working Voltage sv
  • Working Current S70mA

Driver Installation

Install the driver from the CD in the package, or you can download it is from: http://www.deluxworld.com
Tip: Please make sure the mouse has already been connected to your computer when installing the driver.

Driver Setting Instruction

After installation ok, get into the setting interface, you can start to set up the mouse function

Driver Setting Instruction

After installation ok, get into the setting interface, and you can start to set up the mouse function.
A. Button Setting (Custom)

  • 7 buttons can be set for the function (Gl~G7).10 functions can be chosen for one button.
  • Refer to picture A. For Mouse function mode, 11 different functions you can choose. Refer to picture B.
  • For Mouse function mode, 11 different functions you can choose. Refer to picture B.

Note:
The function of Left Click cannot be set firstly, only after another button is set as the function of Left Click.

B. Performance
By adjusting the coordinate, you can set the Sensitivity (DPI), Pointer Speed and Polling Rate.

C. Light
You can set different light mode: All off, Full-lighted, Breathing, Floating RGB mode, Running RGB mode, Neon RGB mode.

Macro

Assign a Macro:

  1. Open Macro on the main interface.
  2. Choose one existing macro to modify it, or add to create a new one.
  3. Click “Record” to start the recording, and click “Stop” to finish it.
  4. You can set the default delay or no delay by choosing Record delay.

Documents / Resources

ANKER ‎AK-98ANWVM-UBA Vertical Mouse [pdf] User Manual
AK-98ANWVM-UBA, Vertical Mouse, AK-98ANWVM-UBA Vertical Mouse
Share

Recent Posts

Justice 2831012WM Party Speaker Float Instruction Manual

2831012WM Party Speaker Float User Manual Model #2831012WM (Fold Inward) (Back Cover) (Front Cover) READ…

7 mins ago

FLEX PE 150 18.0-EC Professional Cordless Rotary Polisher Instruction Manual

PE 150 18.0-EC Professional Cordless Rotary Polisher PE 150 18.0-EC Originalbetriebsanleitung . . . .…

7 mins ago

EUHOMY RF-S 3.2 CU FT Refrigerator Instruction Manual

RF-S 3.2 CU FT Refrigerator Refrigerator 3.2 CU FT Instruction Manual Model:RF-S Email:euhomy@hotmail.com Facebook:@Euhomy Congratulations…

13 mins ago

HIKVISION DS-PDC10AM-VG3 AX Hybrid Series Wired PIR AM Curtain Detector User Manual

DS-PDC10AM-VG3 AX Hybrid Series Wired PIR AM Curtain Detector DS-PDC10AM-VG3 Wired PIR AM Curtain Detector…

22 mins ago

MARS GAMING MWPRO Streaming Webcam User Guide

MWPRO Streaming Webcam

28 mins ago

vtech Toot-Toot Friends 2-in-1 Dinosaur Park User Guide

Toot-Toot Friends 2-in-1 Dinosaur Park Parent's Guide 2-in-1 Dinosaur Park 91-003871-001 UK INTRODUCTION Thank you…

28 mins ago