AMZCEV Wireless Fast Charger WiFi Camera -

Wireless Fast Charger WiFi Camera
User Instructions

AMZCEV Wireless Fast Charger WiFi Camera --

diagram, engineering drawing

Quick Guide For APP Installation

For iOS Devices:
a. Scan below QR Code for iOS operating system to download and install “Camama” APP with iPhone or iPad devices.
b. Search “Camama” in App Store with your iOS devices, download and install App.

For Android Devices:
a. Scan below QR Code for Android operating system to download and install “Camama” App with Mobile or tablet devices.
b. Search “Camama” in Google Play with your iOS devices, download and install App.

AMZCEV Wireless Fast Charger WiFi Camera- iOS Device QR Codehttps://apps.apple.com/us/app/camama/id1511687473?l=zh&ls=1
qr AMZCEV Wireless Fast Charger WiFi Camera- Android Device QR Code
https://www.camama.top/downloadguide/download.html
AMZCEV Wireless Fast Charger WiFi Camera- iOS Device QR Code-2

AMZCEV Wireless Fast Charger WiFi Camera- Android Device QR Code-2

Adding New Camera Device

A. Connected the power supply and turn on the device by an ON/OFF switch. The green light will flash and the camera is waiting to be connected.
B. Enter your phone “settings”-> choose “WLAN”-> find the camera’s hot-spot signal (the name of the signal is “Camama_XXXXX”),connects the camera’s hot spots.
AMZCEV Wireless Fast Charger WiFi Camera- Adding New Camera DeviceAMZCEV Wireless Fast Charger WiFi Camera- Adding New Camera Device-

Important Notes:

If you can not find the camera’s hot-spot signal, please reboot the device by press the reset button about 5s until listening to the sound of “Ding”, after that, the hot spot signal will come up again and you can connect it for the next steps.
C. Load the APP (Camama) and click the button to add a new device->choose “Search in LAN”->Click the device ID and Saved. After this step Finished, the camera has been added to the App and you can watch the video via hot spots at a distance of 10-15m range(Point-Point Mode).

AMZCEV Wireless Fast Charger WiFi Camera- Load the APP

AMZCEV Wireless Fast Charger WiFi Camera- --Load the APP

Important notes: On the above step, some iPhone users can’t find the device, how to resolve it? 
If you’re using IOS14.0 or above, when you connect the device for the first time, please shut off the cellular data of your phone, then go back to the app and refresh it, then you’ll find the device come up after the connection was done, you can turn on the cellular data of your phone.

AMZCEV Wireless Fast Charger WiFi Camera- Important notes

WIFI Setting For Remote Control (Remote Mode)

Click the setting button->Choose the “WIFI Setting”->Click the” Manage Wi-Fi networks” and choose your home wifi and input your passwords, then click the OK button. Waiting for about 5~10 seconds. when it shows “online” again, it means the wifi setting is successful.
After this step was done, the second green light will not flash, which means the camera has been connected to the router successfully, then you can watch your home and access the live feed at any anytime from anywhere by your mobile phone (Remote Control)

Note: 

  1. After input your wifi passwords and config the connection, the device will restart automatically and wait for the camera to restart, which will be completed in about 20-40 seconds. During the connection process, please do not shut off the device manually.
  2. When connecting to WiFi, please make sure to input the correct WiFi password. If the password is wrong, the camera will be offline, then you need to reboot the device and re-pair it.

AMZCEV Wireless Fast Charger WiFi Camera- WIFI Setting For Remote Control

AMZCEV Wireless Fast Charger WiFi Camera- WIFI Setting For Remote Control--

Live Feed and Remote Viewing

(Live Stream and Remote 7/24 Monitoring from anywhere)

AMZCEV Wireless Fast Charger WiFi Camera- Live Feed and Remote Viewing----

Motion Detection Settings

Click the setting button->Choose the “Alarm Setting” to set motion detection. You can active the motion mode here and choose the levels of motion detection.It has 4 levels of  motion(Low, Medium,High, Max)

AMZCEV Wireless Fast Charger WiFi Camera- Motion Detection Settings

SD Card Recording Settings

Click the setting button->Choose the “Other Setting” to set the SD Card. You can active the SD card recording while inserting a Micro SD card, you’re able to choose the 3  recording modes(Full-time recording, Alarm recording, and Timing Record)
Notes: This camera support both recording with/without an SD card.

A. If without an SD card, it shoots videos and is saved to your mobile phone.
B. If with an SD card, the device recording automatically and save the videos to an SD card, and it also saved the recordings to your mobile phone as well.

AMZCEV Wireless Fast Charger WiFi Camera- 5. SD Card Recording Settings

Camera Related Parameters

Resolution Ratio  1080P/2K/4K
Video Format AVI
Frame Number 30
Visual Angle 130 degree
Motion Detection Camera  Shooting Straight line 6 meters
Compressed Format H.264
Night Version 5~8M
Recording Range 20 ㎡
Consumption 2A/5V
Storage Temperature -20-80 degree centigrade
Operating Temperature -10-60 degree centigrade
Operation Humidity 15-85%RH
Memory Card Type TF card
Player Software Mainstream player
Mobile Phone Operating System Android/iOS

The Fast Wireless Charger Features

This wireless charger can Instantly charge your phone or earbuds simply by placing them in the center of the charger pad surface. Never fuss around with plugging and unplugging cables again, just set down and power up.
Don’t worry about taking your case off whenever you have to charge. PowerWave delivers charging power directly through cases up to 5 mm thick—including Otterboxes.

Noted: It comes with an Optimized DC power adapter, you don’t need to buy another adapter & cable for this charger.
Input: 5V-2A /
Output: 5W / 7.5W / 10W
Compatibility:
(1) 10W Mode: Samsung Galaxy S20 / S10 / S9+ / S9 / S8 / S8+ / S7 edge / S7 / S6 edge+, Samsung Note 10 / Note 9 / Note 8 / Note 7
(2) 7.5W Mode: iPhone SE (2020) / 11/ 11 Pro / 11 Pro Max / XS Max / XR / XS / X / 8 / 8 Plus
(3) 5W Mode: AirPods / AirPods Pro / Galaxy Buds / Galaxy Buds+ And All other Qi-enabled phones and devices.

Tips: The charger was designed with an extra USB interface that you can also charge your phone by using a Micro USB cable!!

Power Supply

This device has no battery inside, please keep the device always plugged in the power socket by using the charging cord & adapter which come with the package.

Frequently Question & Answers

What can i do if the camera is offline, shut down or it cannot work?
Please reboot the device to factory settings, then connect the hotspot signal and do the Wi-Fi configuration again.

What kind of micro SD card is required for recording?
The camera supports an 8G-128GB micro SD card. Please use a high-speed class 10 FAT formatted memory card.

Why can’t use my micro SD Card for recording?
You should format the micro SD through the App before using it. If the SD card is not recognized, just remove the card and re-insert it.

Why doesn’t the camera go online?
1.No power connect
2.Check if your router is working properly or not.
3.Weak WiFi signal
4.Wrong password while WiFi setting.

Why is remote monitoring not smooth?
You should choose a suitable resolution to watch according to your internet speed.

Why I can’t save my SD card?
Please make sure you have turn-on the SD card recording function in App, and the SD card must be formatted at the first time to use it.

If i forgot my password?
Press the reboot button for 5s to restore the device to factory setting, then you have to re-connect the wifi and can set the new passwords.

Reminder:
The initial password for the camera is 123456. Please change your own passwords to ensure the security of your camera

If you have any questions for using this product, please E-mail to us:  [email protected]

File Downloads

Instruction Manual
Wireless Fast Charger WiFi Camera
Download [optimized]
Download

References

Leave a comment

Your email address will not be published.