AMC-logo

AMC iAC 120 DSP Power Amplifiers with DSP and Dante Cards

AMC-iAC-120-DSP-Power-Amplifiers-with-DSP-and-Dante-Cards

Installation Amplifiers

Single and two channel Class-D amplifiers for 100 V and low impedance systems. Electronically controlled amplifier circuit, easy menu navigation with rotary controller and LCD display. Silent fan mode, DSP processing: 6-point parametric EQ, limiter, gate, delay. Balanced Phoenix & Stereo RCA inputs and audio link outputs. RS-232 port for full control and status feedback allows integrating iAC amplifiers into large and complex audio systems that can be automated or controlled remotely. iAC 2×240 DSP features internal input-output routing and bridging. All models are available with optional Dante card for use with digital audio network systems.

Technical Specifications

Technical SpecificationsiAC 120 DSPiAC 240 DSPiAC 360 DSPiAC 2X240 DSP
Output power1 x 120 W1 x 240 W1 x 360 W2 x 240 or 1 x 480 W
Power consumption180 VA360 VA540 VA720 VA
Stand by power consumption10 VA10 VA10 VA20 VA
Power supply~ 230 V, 50 Hz
Outputs1 x Phoenix power output, 1 x Phoenix audio link
Inputs1 x Balanced Phoenix, 1 x Stereo RCA Optional: Dante digital audio 1 x RJ-45
Frequency Response (100 V)120 Hz – 20 kHz
Frequency Response (4 ohm)32 Hz – 21 kHz31 Hz – 20 kHz31 Hz – 20 kHz35 Hz – 21 kHz
THD0,07 %0,20 %0,25 %0,16 %
S/N ratio95 dB92 dB98 dB94 dB
Input sensitivity    
Input impedanceBalanced: 11 kΩ, unbalanced 8 kΩ
Remote controlRS-232
Tone control (over RS-232)6-band parametric EQ
CoolingPassive coolingForced air cooling with manual / auto control
Dimensions (H x W x D)44 x 430 x 24588 x 430 x 342
Weight5 kg8 kg9.4 kg11.5 kg

Documents / Resources

AMC iAC 120 DSP Power Amplifiers with DSP and Dante Cards [pdf] Instruction Manual
iAC 120 DSP, iAC 240 DSP, iAC 360 DSP, iAC 2X240 DSP, iAC 120 DSP Power Amplifiers with DSP and Dante Cards, iAC 120 DSP, Power Amplifiers with DSP and Dante Cards, Amplifiers with DSP and Dante Cards, DSP and Dante Cards, Dante Cards, Cards

References

Leave a comment

Your email address will not be published. Required fields are marked *