amazonbasics GS-X Boost Guitar Effect Pedal


  • Read all the instructions before using the product.
  • Do not use this product near water – for example, near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, or the like.
  • Do not use near any heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
  • The product should be connected to a power supply (not provided) only of the type described in the operating instructions and as marked on the product (output voltage of 9 V ==, 300 mA).
  • Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.
  • Radios and TVs placed nearby may experience reception interference. Operate this product at a suitable distance from radios and TVs.
  • Only use attachments/accessories specified by the manufacturer.
  • Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not operate normally or has been dropped.

Intended Use

This product is intended for modifying SOund and volume of a a guitar, electric or bass. This product is intended for private use only. It is not intended for commercial use. This product is intended to be used in dry indoor areas only. No liability will be aCcepted for damages resulting from improper use or non- compliance with these instructions

Product Descriptionamazonbasics-GS-X-Boost-Guitar-Effect-Pedal-1

Before First Use

Check the product for transport damages. Remove all the packing materials. Check that the power supply voltage and current rating corresponds with the power adaptor’s (not provided).
DANGER Risk of suffocation! Keep any packaging materials away from children-these materials are a potential source of danger, e.g. suffocation.
Connecting to power supplyy
Adapter 9 V (not provided):

  1. Connect the adapter to the power socket.
  2. Connect the adapter to a suitable outlet.

Switching on/off

  1.  Connect the product to instrument and amplifier before switching it on.
  2. Set the volume controls of the connected instrument/amplifier to the desired level.
  3.  Set the volume controls DRIVE of the product to “0”.
  4. Press the On/Off switch to switch the product on/off.
  5. The indicator light switches on/off accordingly.
  6. Slowly raise the volume to the desired level.

Adjusting soundamazonbasics-GS-X-Boost-Guitar-Effect-Pedal-2

Cleaning and Storage

WARNING Risk of electric shock! To prevent electric shock, unplug the product before cleaning.
WARNING Risk of electric shock! During cleaning do not immerse the product in water or other liquids. Never hold the product under running water


  • To clean the product, wipe with a soft, dry cloth.
  • Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.


  1. Store the product in its original packaging in a dry area. Keep away from children and pets.


FCC Compliance Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

  1.  this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
  2. Changes or modifications not expressly approved by the party responsible for Compliance could void the user’s authority to operate the equipment.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not OcCur in a particular installation. If this equipment does cause harmful interterence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

Documents / Resources

amazonbasics GS-X Boost Guitar Effect Pedal [pdf] User Manual
BO7ZVZFLZ1, GS-X, Boost Guitar Effect Pedal, GS-X Boost Guitar Effect Pedal

Leave a comment

Your email address will not be published.