1. መግቢያ
Thank you for choosing the SINGER Tailor Deluxe Sewing Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new sewing machine. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.
Figure 1: SINGER Tailor Deluxe Sewing Machine with Base and Cover.
2. የምርት ባህሪዎች
The SINGER Tailor Deluxe Sewing Machine is designed for reliable stitching with a classic, compact design. Key features include:
- Lever type stitch regulator: Allows for precise control over forward and reverse stitching.
- Flip Open Throat Plate: Provides easy access to the bobbin area.
- Open type shuttle race: Facilitates maintenance and thread management.
- Auto Tripping Spring Loaded Bobbin Winder: Ensures consistent and easy bobbin winding.
- Nickel Plated Needle Bar: Offers durability and smooth needle operation.
- In-built thread cutter: For quick and convenient thread trimming.
ምስል 2: መቀራረብ view of the stitch regulator.
3. ማዋቀር
Follow these steps to set up your sewing machine:
- ማሸግ፡ Carefully remove the sewing machine and all accessories from the packaging. Retain the packaging for future storage or transport.
- አቀማመጥ፡- Place the machine on a stable, flat surface. Ensure adequate lighting for your work area.
- መተዋወቅ፡ Identify the main components: needle bar, presser foot, bobbin winder, stitch regulator, and handwheel.
- ማሽኑን መዘርጋት;
- በሾለኛው ፒን ላይ የሾለ ክር ያስቀምጡ.
- ክርውን በውጥረት ዲስኮች ውስጥ ይምሩ።
- Thread the take-up lever.
- Pass the thread through the needle bar guides and finally through the eye of the needle from front to back.
- ቦቢንን መጠምዘዝ፦
- ባዶ ቦቢን በቦቢን ዊንደር ስፒል ላይ ያስቀምጡ።
- Guide the thread from the spool through the bobbin tension disc.
- ክርውን በቦቢን ዙሪያ ጥቂት ጊዜ ይከርክሙት።
- Engage the bobbin winder and turn the handwheel or operate the machine until the bobbin is full. The auto-tripping mechanism will stop winding when full.
- ቦቢን ማስገባት፡
- Open the throat plate.
- Insert the wound bobbin into the shuttle race, ensuring the thread unwinds in the correct direction.
- የቦቢን ክር በውጥረት ስፕሪንግ በኩል ይጎትቱ።
- Close the throat plate.
ምስል 3: የፊት view of the sewing machine, showing threading points.
4. የአሠራር መመሪያዎች
Once the machine is threaded and the bobbin is in place, you can begin sewing:
- ጨርቅ ማዘጋጀት; Place the fabric under the presser foot, aligning the edge with the desired seam allowance.
- የታችኛው ፕሬሰር እግር; Lower the presser foot using the presser foot lifter.
- Adjust Stitch Length: Use the lever type stitch regulator to select your desired stitch length. Moving the lever up or down adjusts the length, and the central position allows for reverse stitching.
- መስፋት ይጀምሩ፦ Slowly turn the handwheel towards you to lower the needle into the fabric. Continue turning the handwheel or use the foot pedal (if applicable) to begin sewing. Guide the fabric gently.
- የተገላቢጦሽ ስፌት፡ To secure the beginning and end of a seam, push the stitch regulator lever to the reverse position and sew a few stitches, then return it to the forward position.
- ስፌት ማጠናቀቅ፡ When you reach the end of your seam, sew a few reverse stitches to secure it. Raise the needle to its highest position, then raise the presser foot. Pull the fabric away from the machine.
- Cut Thread: Use the in-built thread cutter or a pair of scissors to cut the threads, leaving approximately 4-6 inches of thread tails.
ምስል 4: ጎን view of the sewing machine during operation.
5. ጥገና
Regular maintenance ensures your sewing machine operates smoothly and extends its lifespan:
- ማጽዳት፡ Regularly remove lint and dust from the bobbin area, feed dogs, and tension discs using a small brush or lint remover.
- ዘይት መቀባት፡- Refer to the machine's oiling points (usually marked with small holes or indicated in a diagram) and apply a drop of high-quality sewing machine oil as recommended. Do not over-oil.
- መርፌ መተካት; Replace the needle frequently, especially when sewing different types of fabric or if it becomes dull or bent. Use only appropriate needle types for your machine.
- ማከማቻ፡ When not in use, cover the machine with the provided cover to protect it from dust and damage. Store in a dry, cool place.
6. መላ መፈለግ
አንዳንድ የተለመዱ ጉዳዮች እና መፍትሄዎቻቸው እዚህ አሉ
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| የተዘለሉ ስፌቶች | የተሳሳተ መርፌ፣ የታጠፈ መርፌ፣ ተገቢ ያልሆነ ክር፣ ለጨርቁ የተሳሳተ የመርፌ መጠን። | Replace needle, re-thread machine, use correct needle size. |
| ክር መስበር | Incorrect tension, poor quality thread, bent needle, burr on needle plate. | Adjust tension, use good quality thread, replace needle, check for burrs. |
| የጨርቅ ፑኬሪንግ | Too much tension, incorrect stitch length, dull needle. | Reduce tension, adjust stitch length, replace needle. |
| የማሽን ጃም | Thread tangled in bobbin case, fabric pulled too hard. | Clear bobbin area, ensure proper bobbin insertion, guide fabric gently. |
7. ዝርዝሮች
Detailed specifications for your SINGER Tailor Deluxe Sewing Machine:
- የምርት ስም፡ SINGER
- የሞዴል ቁጥር፡- Tailor Deluxe Unit Pack
- ቀለም፡ ጥቁር
- ቁሳቁስ፡ ብረት
- የምርት ልኬቶች (D x W x H)፦ 48D x 32W x 24H ሴንቲሜትር
- የእቃው ክብደት፡ 12 ኪ
- የኃይል ምንጭ፡- በእጅ የተሰራ
- ኤሌክትሪክ; አይ
- የተካተቱ አካላት፡- መደበኛ መለዋወጫዎች
- የትውልድ ሀገር፡- ሕንድ
ምስል 5: የምርት ልኬቶች አልቋልview.
8. ዋስትና እና ድጋፍ
For warranty information, service, or technical support, please contact SINGER India Limited directly:
- ስልክ፡ 18001033474 | 8860118855
- ኢሜይል፡- customersupport@singerindia.com
- Webጣቢያ፡ www.singerindia.com
- አድራሻ፡- Institute for Studies in Industrial Development (ISID), 3rd Floor, Block C-2-3, ISID Campus, 4, Vasant Kunj Institutional Area, New Delhi – 110070, India.
እባክዎ የግዢ ደረሰኝዎን ለዋስትና ጥያቄዎች የግዢ ማረጋገጫ አድርገው ይያዙ።