Einhell TC-TC 800 Tile Cutter Instruction Manual

1. ምርት አብቅቷልview

The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.

ቁልፍ ባህሪዎች

• Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
• Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
• Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
• የመቁረጥ አቅም; Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
• የደህንነት ጥበቃ; A protective guard for the cutting disc ensures user safety from chips and dust.

2. የደህንነት መመሪያዎች

በዚህ የኃይል መሣሪያ የቀረቡትን ሁሉንም የደህንነት ማስጠንቀቂያዎች፣ መመሪያዎች፣ ምሳሌዎች እና ዝርዝሮች ሁልጊዜ ያንብቡ እና ይረዱ። ከዚህ በታች የተዘረዘሩትን ሁሉንም መመሪያዎች አለመከተል የኤሌክትሪክ ንዝረት, የእሳት አደጋ እና / ወይም ከባድ ጉዳት ሊያስከትል ይችላል.

አጠቃላይ የደህንነት ማስጠንቀቂያዎች፡-

• የደህንነት መነጽሮችን፣ የመስሚያ መከላከያዎችን እና ጓንቶችን ጨምሮ ተገቢ የግል መከላከያ መሳሪያዎችን (PPE) ይልበሱ።
• የስራ ቦታው ንጹህ፣ በደንብ መብራት እና ከእንቅፋቶች የጸዳ መሆኑን ያረጋግጡ።
• መሣሪያውን በሚጠቀሙበት ጊዜ ልጆችን እና ተመልካቾችን ያርቁ።
• Never operate the tool if the power cord or plug is damaged.
• Always disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
• ለሚቆረጠው ቁሳቁስ ትክክለኛውን ምላጭ ይጠቀሙ.
• Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.

3. አካላት በላይview

Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:

• Cutting Table (Stainless Steel)
• Diamond Cutting Disc (180 mm diameter)
• የሞተር ክፍል
• የውሃ ማጠራቀሚያ
• Cutting Guide with Scale
• Angle Stop (-45° to +45°)
• Blade ጠባቂ
• ማብሪያ / ማጥፊያ
• የእጅ መያዣ

ምስል 1 - ተጠናቀቀview of the Einhell TC-TC 800 Tile Cutter with its main parts.

4. ማዋቀር

Before operating the tile cutter, ensure proper setup for safety and optimal performance.

4.1 ማሸግ እና መፈተሽ

1. ሁሉንም ንጥረ ነገሮች ከማሸጊያው ውስጥ በጥንቃቄ ያስወግዱ.
2. Inspect the tool for any signs of damage during transit. Do not operate if damaged.
3. ሁሉም የተዘረዘሩ ክፍሎች መኖራቸውን ያረጋግጡ።

4.2 የውኃ ማጠራቀሚያውን መሙላት

The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.

1. Locate the water reservoir beneath the cutting table.
2. Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
3. Regularly check the water level during operation and refill as needed.

Figure 2: Filling the water reservoir for wet cutting.

4.3 Adjusting the Cutting Guide and Angle Stop

For accurate cuts, adjust the cutting guide and angle stop as required.

1. The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
2. For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.

Figure 3: Adjustable angle stop for miter cuts.

5. የአሠራር መመሪያዎች

Follow these steps for safe and effective tile cutting.

5.1 ማብራት / ማጥፋት

1. Connect the tile cutter to a suitable power outlet (240 Volts).
2. To turn on, press the green 'ON' button.
3. To turn off, press the red 'OFF' button.

Figure 4: Power switch for turning the machine on and off.

5.2 ቆርጦ ማውጣት

1. Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
2. Ensure the water pump is active and water is flowing to the blade.
3. Turn on the tile cutter.
4. Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
5. Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.

Figure 5: Demonstrating a tile being cut with the machine.

5.3 ኦፊሴላዊ የምርት ቪዲዮ፡ እንዴት መጠቀም እንደሚቻል

6. ጥገና

Regular maintenance ensures the longevity and performance of your tile cutter.

6.1 Cleaning the Water Reservoir

After each use, clean the water reservoir to prevent buildup of tile dust and debris.

1. የኃይል አቅርቦቱን ያላቅቁ.
2. Remove the cutting table or access panel to reach the reservoir.
3. Empty the dirty water and thoroughly clean the reservoir with fresh water.
4. አካላትን እንደገና ይሰብስቡ ፡፡

6.2 Blade መተካት

Replace the diamond cutting disc when it becomes dull or damaged.

1. መሳሪያው ከሶኬት መወገዱን ያረጋግጡ።
2. Use the provided tool to loosen the blade retaining nut.
3. Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
4. Tighten the retaining nut securely.

7. መላ መፈለግ

This section addresses common issues you might encounter with your tile cutter.

8. ዝርዝሮች

9. ዋስትና እና ድጋፍ

9.1 የዋስትና መረጃ

This Einhell product comes with a የ 2 ዓመት የተወሰነ ዋስትና. እባክዎ ለማንኛውም የዋስትና ጥያቄዎች የግዢ ማረጋገጫዎን ያቆዩ።

9.2 የደንበኛ ድጋፍ

For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webበጣም ወቅታዊ የእውቂያ መረጃ ለማግኘት ድህረ ገጽ ወይም የምርት ማሸጊያዎ።