Categories: ALPEN OPTICS

ALPEN OPTICS AP-800 LED Rechargeable Tek-Light User Manual

Contents hide

1 ALPEN OPTICS AP-800 LED Rechargeable Tek-Light

6 Documents / Resources

6.1 References

7 Related Posts

ALPEN OPTICS AP-800 LED Rechargeable Tek-Light

Parts

Power button
Flashlight (White)
Floodlight (White/Red)
Charging Port/Magnetic Base
Battery Cap
Rechargeable Li-ion 3.7V Battery (16340)
USB Charging Cable w/Magnetic Head
Body Clip
Headband

Charging the Rechargeable Tek-Light

The Tek-Light uses a magnetic charging head to recharge the included battery.
To recharge the battery, plug the USB charging cable into a power source and attach the magnetic head to the magnetic base of the Trek-Light.

The indicator displays blue when connected to a power source, turns red when charging, and back to blue when fully charged. Max charging time is about 2 hours.
It is recommended to regularly charge the Tek-Light after months of storage to maintain optimal battery performance.

Battery Replacement
Unscrew the battery cap, remove battery, insert the new battery with the anode side (+) towards the inner side, then screw the battery cap back on. It is recommended to use a coaxial rechargeable Li-ion 16340 3.7V battery. Battery Bottom Side (-) NOTE:

If non-coaxial battery is used, the included charger will not charge the battery and will need to be charge
per battery manufacturer’s guidelines.

WARNING: Avoid charging non-rechargeable batteries.

Output Selection

With the Trek-Light switched off, press the Power button to turn on and cycle through each light mode, 1-6.

Flashlight Modes

Floodlight Modes

Flashlight SOS White

Floodlight SOS Red

Speciﬁcations

Warranty

Limited 1 Year Warranty once registered within 60 days of purchase from Explore Scientific, LLC.
Visit explorescientiﬁcusa.com/productregistration or scan the QR code to register your product online and familiarize yourself with the applicable warranty coverage.