SafeFly Dual
User Manual
In the box
Product overview
Charging the adapter
Full dry off the USB port before charging.
TX mode
Press and hold the “M” button for 1 second, then click the “+ /- button to select the device to be removed, and then click the “M” button to confirm.
Control functions
Double-click the -14° button to switch the decoding format.(The specific format needs to be supported by the receiving device)
Operating Instructions
- Slide SafeFly Dual to ON to power on, and set your headset/ speaker to pairing mode. (Refer to your headphone/speaker owner’s manual for details).
- Search and connect your device to the transmitter:
• The screen should now display “Searching” after powered on. If not, press and hold the “M” button for 1 second to enter the search mode.
• Use the “+ / – ” key to select the device you want to connect to, then click the “M” key to confirm the connection. The bottom of the screen should now say “Connecting*.
• After a successful connection, the device name of the paired product will appear on the screen. Add another headset to the SafeFly Dual: The adapter can use two headsets at the same time; just repeat the previous operation steps to pair and connect the second headset. - Plug SafeFly Dual into the 3.5mm output port of your mobile phone/TV/ tablet/PC/laptop/MP3/MP4 projector to enjoy music.
How to reset the device?
If SafeFly Dual cannot connect or work normally, please refer to the following methods to reset the device: Press and hold the “M” button for 5 seconds in the power-on state, the screen will display “Factory setting’, and then enter the pairing mode automatically.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna. ‘Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition, compliance with exposure requirements.
Qualcomm aptx is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Disposal
Always dispose of the used appliance at a recycling centre. Do not dispose the used appliance together with household waste.
eVatmaster Consulting GmbH Bettinastr. 30 60325 Frankfurt am Main, Germany contact@evatmaster.com
OST EU_20210429000166
We simply act as EU representative for cross-border sellers, and are not manufacturers/im- porters/distributors for the product, nor involved in the manufacture/import/sale of the product. Therefore, we are not responsible for any after-sales services related to the product. In case of any product quality or infringement issues, the manufacturer/import- er/seller shall be solely held responsible
Operator: Ankbit International Limited Address: 45-51 Chatham Road South, Tsim Sha Tsui, Kowloon, Hong Kong Manufacturer: ShenZhen Ankbit Electronics Limited Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan Dist., Shenzhen, China
FCC ID: 2ATCAABTTX1
MADE IN CHINA
Documents / Resources
 | ALOGIC B03XX Wireless Audio Adapter [pdf] User Manual ABTTX1, 2ATCAABTTX1, B03XX Wireless Audio Adapter, B03XX, Wireless Audio Adapter, Audio Adapter, Adapter |
