AJAZZ NACODEX AKS068 PRO Wireless Mechanical Keyboard
INTRODUCTION
Thank you very much for purchasing our AJAZZ AKS068 PRO triple-mode mechanical keyboard. This product has various cool functions and lighting effects. I hope it can bring you a new operating experience. For more operations, you can go to the AJAZZ official website to download the driver.
Product Specifications
- Product brand:
- Product model: AJAlZAKS06B PRO
- Transmission method: USB wired+2.4G+BT5.0
- Interface type: Type-C interface
- Product size: 323 x 124 x28mm
- Product weight: s,710g
- Battery capacity: 3000 mAh
- Shell material: ABS Injection molding
- Keycap material: Cherry profile PBT material
- Lighting effects: RC B (18 modes of lighting effects)
- Button layout: 6S keys + metal volume knob
- Product structure: Gasketstructure
- Anti-ghosting: All key
- Supported systems: Windows Vista/XP/7 /8/10/11, Mac
Indicator/switch description
Caps lock indicator light (Picture 1):
- Press the Cap, lock key and the white light will stay on to turn on uppercase.
- Press the Caps lock key again and the white light will go off and return to lowercase.
Win lock indicator Ught (Picture L):
When the FN+win key, is pressed, the white light will always light up to indicate that win is locked, and it will return to normal after pressing the unlock key again. (With memory functiun)
Charging indicator light (Picture 1):
The red light flashes when the voltage Is low, stays on when charging, and rums off when fully charged,
Mode & switch:
Three-stage switch, respectively left BT/ m Idd ie USS/right 2.4G.
System switch (Picture 2):
MAC on the left, WIN on the right (ALT-L, WIN-L interchange) default WIN system.
Knob (Picture 3)
Turn left V-, press MUTE, turn right V+
Sleep Mode Description
Power saving sleep state (level 1 sleep):
The keyboard backlight will turn off after 5 minutes of no key operation. Press any key to wake up the keyboard backlight and connect back to BT/2.4G;
Deep sleep state (level 2 sleep):
The keyboard will go into deep standby after 30 minutes of no key operation, BT will be disconnected and sleeping, press any button to wake up the keyboard backlight and connect back to BT/2.4G;
Low power state
- Low battery status: The battery indicator light flashes red slowly (indicator light 3)
- Charging status: The battery indicator light is always red (indicator light 3)
- When fully charged: the battery indicator light is off (indicator light 3)
- Mode Connection Instructions
BT mode (after turning the switch to BT position): short press to switch, long press to pair BT channel 1: Q (BT name: AKS068-1)
- Switching method: Short press the FN+Q key combination to switch the BT channel. The light of the Q key flashes slowly and enters the reconnection state. If the reconnection is successful, the light will return to the normal light effect. If the reconnection is unsuccessful for 20S, it will enter sleep.
- Pairing method: Press and hold the FN+Q key combination for 3 seconds to pair. The Q key light (corresponding to blue) flashes quickly to enter the pairing mode. After the connection is successful, the Q key light stays on for 2 seconds and then returns to the overall backlight effect; pairing takes 1 minute. Failed to enter hibernation.
- BT channel 3: E (BT name: AKS068-3)
- Switching method: Short press the FN+E key combination to switch the BT channel. The light of the E key flashes slowly and enters the reconnection state. If the reconnection is successful, the light will return to the normal light effect. If the reconnection is unsuccessful for 20S, it will enter sleep.
- Pairing method: Press and hold the FN+E key combination for 3 seconds to pair. The E key light (corresponding to purple) flashes quickly to enter the pairing mode. After the connection is successful, the E key light stays on for 2 seconds and then returns to the overall backlight effect; pairing does not occur for 1 minute. Successfully entered hibernation.
Note: The current channel is displayed when the FN key is pressed. If the current connection is BT channel 2/BT2, the W key displays a green light when the FN key is pressed. It follows the current backlight when released (if the current connection is 2.4G mode, press When the FN key is pressed, the R key displays a green light)
2.4G mode (switch to 2.4G mode): short press to switch, long press to pair
- Switching method: Turn the switch to the 2.4G position, the R key light flashes slowly (up to 30 seconds), plug in the receiver to enter the 2.4G connection mode, and enter sleep after the 20S failed connections.
- Pairing method: Press and hold FN+R for 3 seconds to force into the 2.4G pairing mode. The R button light (green light) flashes quickly and stops flashing after the pairing is completed (for after-sales). After the connection is successful, the R button light stays on for 2 seconds. Then return to the overall backlight effect;
Wired mode
Switching method: Turn the switch to the wired position, plug in the USB data cable to connect to the wired
Light Switching Instructions
- FN+|| = Light effect switching, 18 kinds of light effects cycle in sequence
- FN+DEL = Switch side light mode, 5 kinds of light effects cycle in sequence
- FN+Spacebar = Press and hold for 3 to 5 seconds, the keyboard backlight will flash 3 times, clear the lighting effects, and restore to factory settings.
- FN+Z = Side light ON/OFF (with memory)
- FN+X = Backlight ON/OFF (with memory)
- FN+↑ = light brightness +, the indicator light flashes 3 times to indicate the limit (10 levels)
- FN+ ↓ = light brightness-, the indicator light flashes 3 times to indicate the limit (10 levels)
- FN+← = backlight hue –
- FN+→ = backlight hue+
- FN+;: = Backlight saturation –
- FN+ ” = Backlight saturation +
- FN+|{= backlight light speed-(5 levels)
- FN+]} = backlight light speed+(5 levels)
- FN+V = Side light speed – (5 levels)
- FN+B = Side light speed + (5 levels)
- FN+N = Side light saturation –
- FN+M = Side light saturation +
- FN+,< = side light hue-
- FN+.> = side light hue+
- FN+PGUP = Side light brightness + (10 levels)
- FN+PGDN = Side light brightness – (10 levels)
Multimedia key combination instructions
- FN+J = End
- FN+K= PrtSc
- FN+L= ScrLk
- FN+I = Insert
- FN+0 = Home
- FN+P = Pause
Hot-swappable operation steps instructions
Hot-swappable: You can replace different switches and customize the tactile and linear feedback you like. The 3/5pin switches base is compatible with most mechanical switches bodies.
- Use a key puller to pull out the keycaps
- Use a switch puller to lock the upper and lower buckles at the bottom of the switches body, and then pull the switches upwards.
- New switches calibration pin and hole position
- Press the switches vertically
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction.
Documents / Resources
 | AJAZZ NACODEX AKS068 PRO Wireless Mechanical Keyboard [pdf] User Manual 2AY3H-AKS068PRO, 2AY3HAKS068PRO, aks068pro, AKS068 PRO Wireless Mechanical Keyboard, AKS068 PRO, Wireless Mechanical Keyboard, Mechanical Keyboard, Keyboard |
