Ajax Online Smart WIFI Roller Blind Installation Guide

Smart WIFI Roller Blind Installation

Contents hide

1 Tools required: pencil, Philips screwdriver drill & drill bit

2 Instructions for pairing with Smart Life/Tuya app

3 Alexa Skills & Routines – Setup Guide

4 Siri Shortcuts – Setup Guide

5 Home Automation Made Easy

6 Warranty

7 Documents / Resources

7.1 References

8 Related Posts

Tools required: pencil, Philips screwdriver drill & drill bit

1. Hook the template onto the chain. Now align the template against the wall, whilst ensuring there is enough tension against the chain and sponge.		2. Now use a pencil to mark the holes for the screws. If you’re installing the motor on the left of the the window use the “L” marking and “R” marking to install on the right
3. Now drill into the markings to create holes for the screws Now screw the bracket onto the wall.		4. Insert the correct wheel in the motor. Now hook the chain around the wheel.
5. Now clip the cover onto the motor and then slide the motor into the bracket, whilst making sure the chain has enough tension. Make sure the chain isn’t too tight.		6. To set your motor direction, please ensure you have toggled the switch either left or right. If the motor is mounted on the left of the blinds, you will need to toggle the swtch to the right and vice-versa
7. Upper & Lower Blind Settings Upper setting 1) Press and hold down the stop button for 6 seconds.The LED will flash to confirm. 2) Press the up arrow on the motor until the required height is achieved and then press stop. The LED will flash to confirm. Lower setting 1) This will be the same as the instructions above, except you will need to press the down button on the motor instead.		8. To restore to factory settings, press & hold the up and down arrow for 5-8 sec. until the LED flashes. To release the motor off the bracket, push the button nderneath the motor

Instructions for pairing with Smart Life/Tuya app

1. Please note that you need to pair each device one at a time. Please ensure that your WIFI connection is on 2.4 GHz Download and register an account on the Smart Life or Tuya App. Then select “+”.		2. Select “Small Home Appliance” and then scroll down and select “Curtain”
3. Press and hold the “up” and “stop” button for 6 seconds on the motor until the LED flashes		4. Enter your WIFI credentials to connect to your home network. Please ensure that the WIFI network is 2.4 GHz. Please contact us if you need assistance.
5. Now wait until the device is discovered.		6. Once the device is discovered, rename it and Select “Done”.

For further information, please contact us and we’ll be happy to assist you.

Alexa Skills & Routines – Setup Guide

Warranty
Activate your 1 year free warranty…
Please do this at your earliest convenience. It takes a couple of minutes and you’ll have total peace of mind.

If you have any issues, please do not hesitate in contacting us at info@ajaxonline.co.uk

REGISTER ONLINE
www.ajaxonline.co.uk/warranty

Siri Shortcuts – Setup Guide

To begin, open the Tuya or Smart Life app

Home Automation Made Easy

Ajax Online specialise in a wide range of premium home automation products. We source the most innovative and marketing leading technologies and products within the home automation industry. Our product portfolio consists of everything from Zigbee LED Strips, Smart Curtain Tracks, Zigbee LED Controllers and Zigbee Smart Bulbs. We also provide bespoke solutions, so please do not hesitate in contacting us for a tailored quote.