Gebruikershandleiding V&AAntwoord
01 Aug. 2025 - 06:32 vm.
To change the setpoints on the KE2 Temp + Valve controller, volg hierdie stappe:
1. Access Setpoint mode by pressing and holding the "Enter" button until "Control Type (CtL)" displays on the screen.
2. Use the up and down arrow buttons to advance through the available setpoints.
3. Press the "Enter" button to view die huidige instelling.
4. Press the up or down arrow buttons to change the setpoint value.
5. Press and hold the "Enter" button to confirm each setpoint change.
6. Press the "Back" button to escape and return to normal operation.
Remember to refer to the complete instructions provided in the gebruikersgids for detailed information on each setpoint and its range.
Voeg nuwe kommentaar by