Micron Electronics Prime LS100 LTE Tracker

Inleiding

Prime LS100 is a powerful LTE Tracker which is designed as Emergency call equipment. It works on LTE B4/B13 with superior receiving sensitivity. Its location can be real time or schedule tracked by backend server or specified terminals. Based on the embedded wireless tracking protocol, Prime LS100 can communicate with the backend server through LTE network, and transfer reports of emergency. Service provider is easy to setup their tracking platform based on the functional wireless tracking protocol.
The WIFI function will be activated and report the MAC addresses once the device is in alerting state. The BLE function will be activated and scan the third-party BLE data or Beacon broadcast by custom setting or protocol.
RF 433MHz is used as a supervised short range RF communication link between the unit and the Base Station to determine if they are no longer in range with each other.

Produk verbyview

voorkoms

Buttons Interface Description

Knoppie/USB-koppelvlakbeskrywing

SLEUTEL/koppelvlak

Beskrywing

Herstel sleutel Power off     the Prime LS100
Adapter Connected to a Power supply socket can power on Prime LS100
Funksiesleutel SOS -modus
Feature Key Play to do list audios.
TEST Key Toets af
LED-beskrywing


Figuur 1-2

There are 3 LED lights in Prime LS100 device, the description as following.

Lig Event staat
Function Key LED Function Key pressed Solid when pressed
Feature Key LED Feature Key pressed Solid when pressed
Test Key LED Test Key pressed Solid when pressed
Breath Light Test Key long press Breath effect

Aan die slag

Dele Lys

Naam

Prent

Opmerking

Prime LS100 Base Station The LTE Base Station.
Prime LS100 adapter It used to power on the Prime LS100.
Ingeboude battery

The following items are suggestion for built-in battery usage, please pay more attention.

  • The device is Emergency call equipment, which is designed to be used by adapter always plugged.
  • There is a 850mAh Lithium polymer battery integrated in device. The built-in battery will only be used when the adapter unplugged.

Note: If the Prime LS100 device is firstly used, please make sure the adapter of the device is plugged in the power supply socket.

Prime LS100 Adapter

Prime LS100 base station is connected with an AC Adapter.
The adapter is used for device power on, built-in battery charging, which should be plugged in power supply socket at any time ( by end user).

Skakel aan / Skakel uit


Figuur 2-2

Skakel aan: Plug in the power adapter and power on.
Skakel af: Unplugged the power adapter and press the Reset button.

let wel: the user can not power off Prime LS100 if the adapter is plugged.

Frekwensie

LTE: Band2/Band4/Band5/Band12/Band13
WIFI::2412MHz-2462MHz
BLE:2412MHz-2472MHz
433:433.92MHZ

Foutsporing en veiligheidsinligting

Probleemoplossing

Wanorde

Moontlike rede

Oplossing

Boodskappe kan nie deur die mobiele netwerk aan die agterkantbediener gerapporteer word nie. APN is verkeerd. Sommige APN kan nie direk die internet besoek nie. Vra die netwerkoperateur vir die regte APN.
Die IP-adres of poort van die backend-bediener is verkeerd. Maak seker dat die IP-adres vir die backend-bediener 'n geïdentifiseerde adres op die internet is.
Unable to power off Prime LS100. Die funksie van kragsleutel is gedeaktiveer deur AT+GTFKS. Aktiveer die funksie van die kragsleutel deur AT+GTFKS.
Battery kan nie gelaai word nie Die battery is te lank nie gebruik nie en is gesluit. Using a external power source with 3.6V to 4.2V DC power supply to active the battery or apply for after sale help.
Veiligheidsinligting

The following items are suggestion for safety use, please pay more attention. Please do not disassemble the device by yourself. Please do not put the device on the overheating or too humid place, avoid
exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Please do not use Prime LS100 on the airplane or near medical equipment.

FCC Let op.

§ 15.19 Etiketteringvereistes.
Hierdie toestel voldoen aan deel 15 van die FCC-reëls. Bediening is onderhewig aan die voorwaarde dat hierdie toestel nie skadelike steuring veroorsaak nie.

§ 15.21 Inligting aan die gebruiker.
Enige veranderinge of wysigings wat nie uitdruklik goedgekeur is deur die party wat verantwoordelik is vir nakoming nie, kan die gebruiker se mag om die toerusting te gebruik, ongeldig maak.

§ 15.105 Inligting aan die gebruiker.
Opmerking: hierdie toerusting is getoets en voldoen aan die limiete vir 'n digitale Klas B-toestel, volgens deel 15 van die FCC-reëls. Hierdie perke is ontwerp om redelike beskerming te bied teen skadelike steuring in 'n residensiële installasie. Hierdie toerusting genereer gebruike en kan radiofrekwensie-energie uitstraal en, indien dit nie geïnstalleer en gebruik word volgens die instruksies nie, kan dit skadelike interferensie vir radiokommunikasie veroorsaak. Daar is egter geen waarborg dat steuring nie by 'n spesifieke installasie sal plaasvind nie. As hierdie toerusting skadelike interferensie met radio- of televisieontvangs veroorsaak, wat bepaal kan word deur die toerusting aan en uit te skakel, word die gebruiker aangemoedig om die interferensie met een of meer van die volgende maatreëls reg te stel:
- Hervestig of skuif die ontvangsantenne.
-Verhoog die skeiding tussen die toerusting en die ontvanger.
-Sluit die toerusting in 'n stopcontact op 'n stroombaan anders as waarop die ontvanger gekoppel is.
Raadpleeg die handelaar of 'n ervare radio- / TV-tegnikus vir hulp.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withmin imum distance 20cm between the radiator & your body.

Dokumente / Hulpbronne

Micron Electronics Prime LS100 LTE Tracker [pdf] Gebruikershandleiding
BAS4GA, ZKQ-BAS4GA, ZKQBAS4GA, Prime LS100 LTE Tracker, LS100 LTE Tracker, LTE Tracker, Tracker

Los kommentaar

Jou e-posadres sal nie gepubliseer word nie.