Instruction Manual for HOBBES models including: SURVLtest Multifunction CCTV Tester, SURVLtest, Multifunction CCTV Tester, CCTV Tester, Tester
HOBBES SURVLtest, CCTV Tester for IP/HD Coax/Analogue - SECOMP International AG
English - Safety Instructions: HOBBES SURVLtest 13.01.3291 · The tester is designed for use in compliance with local electrical regulations and should not be used in locations unsuitable for electrical devices, such as hospitals or gas stations. · To prevent functional decline or damage, avoid exposing the product to moisture or splashing water. · Keep the exposed parts of the tester free from dust and liquids. · During transportation and use, avoid violent collisions or vibrations to prevent damage to components and functionality issues. · Do not leave the tester unattended while charging. If the battery becomes excessively hot, disconnect it from the power source immediately. Do not charge the tester for more than 8 hours. · Avoid using the tester in high-humidity environments. If the tester becomes damp, power it off immediately and disconnect any connected cables. · The tester should not be used in environments containing flammable gases. · Do not disassemble the tester, as there are no user-serviceable components inside. For repairs or disassembly, please contact our company's technician. · The tester should not be used in areas with strong electromagnetic interference. · Avoid touching the tester with wet hands or any water-laden objects. · Do not clean the tester with detergents. Use a dry cloth for cleaning. If stubborn dirt persists, use a soft cloth moistened with water or a neutral detergent, ensuring the cloth is thoroughly wrung out.Microsoft: Print To PDF