AeroCool Skribble ARGB Mid Tower Case

Front 1/O Cable Connection

Front /0 Connectors
(Please refer to the motherboard’s manual for further instructions).

Note: Specifications may vary depending on your region.
Contact your local retailer for more information.

Accessory Bag Contents

How to Install

Install Motherboard

Install PSU

Install add-on Card

Install 2.5″ SSD x1

Install 2.5″ SSD x2Install 3.5″ HDD x1

Install 3.5″ HDD x1Install Front FansInstall Rear Fan

Install Top Fans

Install Front Radiator

Install Rear Radiator

Install Top Radiator

1/O Panel

RGB Fan Hub (H66C)

Connection Set Up User Guide
For ASUS Aura Sync, MsI Mystic Light Sync, and GIGABYTE RGB Fusion Motherboards

1. Connect (A) to motherboard’s PWM socket
2. Connect (B) to motherboard’s Addressable RGB socket
3. Connect (C) to PSU’s SATA connector

For GIGABYTE RGB Fusion Motherboards

1. Connect (A) to motherboard’s PWM socket
2. Connect (D) to motherboard’s Addressable RGB socket
3. Connect (C) to PSU’s SATA connector

For Non-Addressable RGB Motherboards

1. Connect (A) to motherboard’s PWM socket
2. Connect the 2-Pin LED button connector (E) with your hub.
3. Connect (C) to PSU’s SATA connector
4. Use the RGB fan connectors (F) to connect the Addressable RGB fans with your hub.

Documents / Resources

AeroCool Skribble ARGB Mid Tower Case [pdf] User Guide Skribble ARGB Mid Tower Case, Skribble ARGB, Mid Tower Case, Tower Case

References

• User Manual