Introduction
Thank you for choosing the SONGMICS Storage Bench with Armrests. This versatile and stylish ottoman is designed to provide comfortable seating and convenient storage for your living room, bedroom, or entryway. With its sturdy construction, ample storage capacity, and thoughtful design, it enhances both the functionality and aesthetics of your home. Please read this manual carefully before assembly and use to ensure safe and proper operation.
Important Safety Information
- Always ensure the bench is placed on a flat, stable surface to prevent tipping.
- Do not exceed the maximum static load capacity of 600 lb (300 kg). Overloading can cause damage or injury.
- Keep fingers clear of the lid mechanism when opening or closing the storage compartment to avoid pinching.
- This product is intended for indoor use only.
- Do not stand on the bench.
- Keep small parts and packaging materials away from children during assembly.
This diagram illustrates the overall dimensions and the maximum weight the bench can safely support.
Package Contents
Please check to ensure all components are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Storage Bench Body (with lid and armrests)
- Steel Legs (4x)
- Assembly Hardware (screws, washers, Allen key, etc.)
- Instruction Manual
Assembly Instructions
Assembly is required for this product. Please follow these steps carefully:
- Unpack all components and lay them out on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches.
- Identify the main bench body and the four steel legs.
- Attach each steel leg to the designated mounting points on the underside of the bench body using the provided screws and Allen key. Ensure all screws are tightened securely, but do not overtighten.
- Carefully turn the assembled bench upright.
- Verify that the bench is stable and all connections are firm before use.
For visual guidance, refer to the assembly diagrams typically found in the included printed manual.
Operating Instructions
Using the Storage Compartment
The bench features a spacious 20-gallon storage compartment under the seat. To access it:
- Gently lift the seat lid. The gas dampening rod will assist in a smooth and controlled opening, holding the lid in place.
- Place or retrieve items such as blankets, pillows, books, or other household goods.
- To close, gently push the lid down. The gas dampening rod will ensure a soft and quiet closing action.
This image shows the bench with its lid open, demonstrating the ample storage capacity.
Seating and Armrests
The bench provides comfortable seating with a 1.6-inch high-density foam cushion and supportive armrests. Use it as an extra seat, a footrest, or a decorative piece in any room.
Side Pockets
Utilize the integrated side pockets for convenient storage of smaller items like remote controls, magazines, or personal accessories. This image demonstrates the bench's use as a bed-end bench, showcasing its design and features.
Care and Maintenance
- Cleaning: Wipe the fabric surface with a dry cloth to remove dust and light spills. For stubborn stains, consult a professional upholstery cleaner. Do not use harsh chemicals or abrasive cleaners.
- Avoid Moisture: Keep the bench away from excessive moisture and direct sunlight to prevent damage to the fabric and frame.
- Regular Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bench feels wobbly after assembly. | Screws are not fully tightened. Uneven floor surface. | Ensure all leg screws are securely tightened. Move the bench to a level surface or use furniture pads to stabilize. |
| Lid does not open or close smoothly. | Gas dampening rod obstruction or malfunction. | Check for any obstructions around the gas dampening rod. If the issue persists, contact customer support. |
| Unusual noises during use. | Loose connections or parts. | Inspect all connections and tighten any loose screws. |
Specifications
| Feature | Detail |
|---|---|
| Model | ULOM072G01 |
| Color | Dark Gray |
| Overall Dimensions (L x W x H) | 50" x 19.7" x 21.7" (127 cm x 50 cm x 55 cm) |
| Internal Storage Dimensions (L x W x H) | 39.4" x 16.5" x 7.1" (100 cm x 42 cm x 18 cm) |
| Storage Capacity | Approx. 20 Gallons |
| Max. Static Load Capacity | 600 lb (300 kg) |
| Frame Material | Solid Wood |
| Leg Material | Alloy Steel |
| Upholstery Material | Linen-look Fabric |
| Cushion Thickness | 1.6 inches (High-density foam) |
| Item Weight | 41.8 Pounds |
| Assembly Required | Yes |
User Tips
- Consider the bench's dimensions (50" width) when placing it at the end of a bed. It is suitable for Twin (39" wide), Full (54" wide), and Queen (60" wide) beds, offering varying overhangs.
- Utilize the side pockets for frequently accessed items like remote controls, reading glasses, or small books to keep your main storage compartment organized.
- The gas dampening rod ensures a soft close; avoid forcing the lid shut to prolong its lifespan.
Warranty and Customer Support
For warranty information, product support, or to report missing/damaged parts, please refer to the contact details provided in your product packaging or visit the official SONGMICS website. Please have your model number (ULOM072G01) ready when contacting support.
