1. Introduction
This manual provides essential information for the safe and effective use of your DREAME V2406-8S1P-GYA Li-Ion battery, designed for the Z40 Station Vacuum Cleaner. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your battery.
2. Safety Information
Lithium-ion batteries require careful handling. Please observe the following safety precautions:
- Do not disassemble, crush, puncture, or short-circuit the battery.
- Keep the battery away from heat sources, direct sunlight, and flammable materials.
- Do not expose the battery to water or other liquids.
- Only use the original or a certified compatible charger for your DREAME Z40 vacuum cleaner.
- Store the battery in a cool, dry place when not in use.
- If the battery shows signs of damage, swelling, or leakage, discontinue use immediately and dispose of it properly.
- Dispose of used batteries according to local regulations. The crossed-out wheeled bin symbol on the battery indicates that it should not be disposed of with household waste.

3. Specifications
| Feature | Specification |
|---|---|
| Battery Type | Li-Ion |
| Nominal Capacity | 3000mAh |
| Voltage | 29.6V |
| Application | DREAME Z40 Station Vacuum Cleaner |
| Battery Model | V2406-8S1P-GYA |
| Weight | 0.61 KG |
| Certifications | CE, RoHS |
| Manufacturer (Brand Name) | Jedila |
4. Package Contents
- 1x DREAME V2406-8S1P-GYA Z40 Station Vacuum Cleaner Battery
Note: Please inspect the package contents upon receipt. If any items are missing or damaged, contact your seller immediately.
5. Setup and Installation
Before installing the new battery, ensure your DREAME Z40 Station Vacuum Cleaner is turned off and unplugged from its charging station.
- **Locate the Battery Compartment:** Refer to your vacuum cleaner's original manual to identify the battery compartment. Typically, it's located on the main body of the vacuum.
- **Remove the Old Battery:**
- If applicable, press any release buttons or unlatch mechanisms securing the old battery.
- Carefully slide or pull out the old battery from its compartment.
- **Insert the New Battery:**
- Align the new DREAME V2406-8S1P-GYA battery with the battery compartment, ensuring the connectors match.
- Gently slide the battery into place until it clicks securely. Do not force the battery.
- **Secure the Battery:** If there are any latches or covers, close and secure them.
- **Initial Charge:** After installation, place your vacuum cleaner on its charging station to fully charge the new battery before its first use.


6. Operation
Once the battery is installed and fully charged, your DREAME Z40 Station Vacuum Cleaner is ready for use. Operate your vacuum cleaner as per its original instruction manual.
- **Charging:** Always charge the battery using the vacuum cleaner's designated charging station or adapter. Avoid interrupting the charging cycle frequently.
- **First Use:** For optimal battery life, it is recommended to fully charge the battery before its initial use and to fully discharge it during the first few cycles.
- **Battery Indicator:** Monitor your vacuum cleaner's battery indicator to understand the remaining charge and when recharging is necessary.
7. Maintenance
Proper maintenance can extend the life of your battery:
- **Regular Charging:** Avoid letting the battery completely drain for extended periods. Recharge it regularly, even if the vacuum is not used frequently.
- **Storage:** If storing the vacuum cleaner for a long time, ensure the battery is charged to about 50-60% and store it in a cool, dry place. Recharge it every 3-6 months to prevent deep discharge.
- **Cleaning:** Keep the battery contacts clean and free from dust or debris. Use a dry cloth to wipe them if necessary.
- **Temperature:** Avoid exposing the battery to extreme temperatures (very hot or very cold), as this can degrade performance and lifespan.
8. Troubleshooting
If you encounter issues with your battery, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not charging |
|
|
| Shortened runtime |
|
|
| Battery overheating |
|
|
9. User Tips
- For best performance, always use the battery with a clean vacuum cleaner filter and brush roll to reduce strain on the motor and battery.
- If you notice a significant drop in runtime, try a full charge-discharge cycle a few times to recalibrate the battery's charge indicator.
- When replacing the battery, ensure the vacuum cleaner is completely off and cool to the touch to avoid any accidental operation or burns.
10. Warranty and Support
For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.





