Bikevee Wireless GPS Bike Computer User Manual

1. Introduction

Thank you for choosing the Bikevee Wireless GPS Bike Computer. This device is designed to provide comprehensive cycling data, including speed, distance, time, altitude, and more, to enhance your riding experience. Featuring a clear LCD display, IPX7 waterproof rating, and multi-satellite positioning, it offers reliable performance for both amateur and professional riders. Please read this manual carefully before use to ensure proper operation and maintenance.

2. Setup

2.1 Package Contents

Before you begin, ensure all items are present in your package:

• Bikevee GPS Bike Computer
• Charging Cable (Type-C)
• Standard Bike Mount
• Rubber Pad
• Rubber Rings
• User Manual (PDF available online)

2.2 Mounting the Device

The Bikevee GPS Bike Computer features an easy, wireless installation process. Unlike traditional wired bike computers, there's no need to set wheel diameter or install magnets and wires.

1. Attach the bike mount to your bicycle's handlebar using the provided rubber pad and rubber rings. Secure it firmly.
2. Once the mount is in place, simply attach the Bikevee GPS Bike Computer to the mount.
3. Power on the device and wait for it to receive a satellite signal.

2.3 Charging the Device

The device is equipped with a 650mAh battery, providing up to 28 hours of battery life. It takes approximately 2 hours for a full charge using the provided Type-C charging cable.

• Connect the Type-C charging cable to the charging port on the device.
• Connect the other end of the cable to a USB power source (e.g., computer, USB wall adapter).
• The device will indicate charging status on its screen.

Note: The device does not support fast charging.

3. Operating Instructions

3.1 Power On/Off and Automatic Functions

• Power On: Press and hold the power button (usually the left button) until the screen turns on.
• Power Off: Press and hold the power button until the screen turns off.
• Automatic Sleep: The device will automatically enter sleep mode six minutes after you stop cycling.
• Automatic Wake-up: When you start cycling again, the device will automatically wake up from sleep mode and turn on the backlight.

3.2 Backlight Control

The device features a green backlight for clear visibility in various lighting conditions.

• Toggle Backlight: Press both the left and right buttons simultaneously for a short duration to turn the backlight on or off.
• Backlight Always On (Cycling Interface): To keep the backlight on for an extended period in the cycling interface, press and hold both the left and right keys simultaneously. This is useful for night riding.

3.3 GPS Positioning

The Bikevee computer utilizes a 5-satellite positioning system for high accuracy and stable performance:

• GPS
• BDS (BeiDou Navigation Satellite System)
• GLONASS (Globalnaya Navigatsionnaya Sputnikovaya Sistema)
• GALILEO
• QZSS (Quasi-Zenith Satellite System)

The first connection time to satellites may be longer, but subsequent connections will be significantly faster. This multi-system support ensures accurate positioning and data collection even in challenging environments like tunnels.

3.4 Data Display Modes

The device supports 3 functional pages, displaying up to 17 types of data. Press the right button to cycle through the display pages.

• Mode 1: Trip Time, Trip Distance, Gradient, Altitude
• Mode 2: Average Speed, Ascent Distance, Average Gradient, Total Trip Time
• Mode 3: Maximum Speed, Total Distance (Odometer), Maximum Gradient, Highest Altitude Point

3.5 Setting Units (Metric/Imperial)

1. Press and hold the right button for 2 seconds to enter the settings page.
2. Press the left button to toggle between metric (KM/H) and imperial (M/H) units.
3. Press the right button to confirm your selection and move to the next setting or exit.

3.6 Setting Time Zone

1. Press and hold the right button for 2 seconds to enter the settings page.
2. Navigate to the Time Zone setting (e.g., UTC+8:00).
3. Press the left button to adjust the time zone to match your current location.
4. Press the right button to confirm and exit.

3.7 Clearing Data

• Clear Current Cycling Data: In cycling mode, press both the left and right buttons simultaneously for 2 seconds. The screen will blink, indicating that current trip data has been cleared.
• Clear All Data (including Total Mileage): In cycling mode, press both the left and right buttons simultaneously for 6 seconds. After the screen blinks, all stored data, including total mileage, will be cleared.

4. Maintenance

4.1 Waterproofing

The Bikevee GPS Bike Computer has an IPX7 waterproof rating, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This makes it suitable for use in rain and wet conditions. However, it is not recommended for prolonged submersion or high-pressure water jets.

4.2 Cleaning and Storage

• Wipe the device with a soft, damp cloth to remove dirt and dust. Avoid using harsh chemicals or abrasive cleaners.
• Ensure the Type-C charging port cover is securely closed to maintain waterproofing.
• Store the device in a cool, dry place when not in use, away from direct sunlight and extreme temperatures.

4.3 Battery Care

• Charge the device regularly, even if not in frequent use, to maintain battery health.
• Avoid completely draining the battery for extended periods.
• Use only the provided charging cable or a certified Type-C cable.

5. Troubleshooting

• Device not turning on: Ensure the battery is charged. Connect to a power source and try again.
• No GPS signal: Ensure you are in an open area with a clear view of the sky. The first connection may take longer.
• Incorrect data display: Check unit settings (metric/imperial). If data seems erratic, try clearing current cycling data.
• Backlight not working: Ensure the backlight is enabled. Try pressing both left and right buttons simultaneously to toggle it.
• Device unresponsive: Try a soft reset by holding the power button for an extended period (e.g., 10-15 seconds) until it restarts.

6. Specifications

7. User Tips

• For optimal GPS signal acquisition, ensure the device is mounted securely and has an unobstructed view of the sky.
• Utilize the backlight 'always on' feature during night rides for improved visibility of your data.
• Regularly check your battery level, especially before long rides, to avoid unexpected power loss.
• Keep the device's firmware updated if new versions become available, as this can improve performance and add features.
• Remember to clear your trip data after each ride if you want to track individual sessions accurately, or clear all data periodically to reset the odometer.

8. Warranty & Support

8.1 Quality Warranty

The Bikevee GPS Bike Computer comes with a 2-year quality warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

8.2 Customer Support

For any questions, technical assistance, or warranty inquiries, please contact our customer support team:

• Email: support@bikevee.com

When contacting support, please provide your product model number and a detailed description of the issue.

You can also refer to the official user manual PDF for more detailed instructions: View User Manual (PDF)