KERUI G70 7-inch Full Touch Screen Alarm System User Manual

About Your Alarm System

This is your smart alarm system. All sensors are wirelessly connected to the panel. The panel is always watching the sensors in your home to see if something is wrong. If one of the sensors reports that something is wrong while the system is armed, the panel begins sounding, and an alarm text notification is sent and an alarm call is made to all registered users.

In the Box

• Alarm Panel x1
• Door/Window Sensor x1
• Motion Sensor x1
• USB Cable x1
• User Guide x1
• Screws and anchors x4

Optional Accessories (May vary by kit)

• Power Adapter
• Remote Tag
• Siren
• Wireless Siren
• Wireless Keypad
• Indoor Camera (K259)
• Outdoor Camera (K268)
• Smoke Detector (S20)
• Outdoor Solar Siren (SJ1)

Specifications

Alarm Panel

• Power Supply: 110/220VAC to Type-C 5V, 2000mA
• Backup Battery: 3.7V, 5000mAh Lithium Battery
• Avg. Consumption: <300mA@screen off, <650mA@screen on
• Siren Output: <500mA@high volume mode, <50mA@low volume mode
• Radio Frequency: 433Mhz
• Cellular: Cat-1 (LTE-FDD B1/B2/B3/B4/B5/B7/B8/B28/B66 for SA version; LTE-FDD B1/B3/B5/B7/B8/B20 for E version; LTE-FDD B1/B3/B5/B8 and LTE-TDD B34/38/39/40/41 for C version)
• SIM Card: 4FF/Nano
• Wi-Fi: IEEE802.11b/g/n
• Connectivity: Wireless siren, up to 10 remote tags, up to 100 sensors
• Operation Temperature: -10~55℃

D10 Door/Window Sensor

• Battery: CR2032 x1
• Standby current: <8µA
• Alarm current: <15mA
• Sensing distance: >1.5cm
• Wireless frequency: 433Mhz (FSK)
• Wireless coding: eV1527
• Transmission distance: >80M (open distance)
• Operating temperature: -10~50℃
• Storage temperature: -40~70℃
• Operating humidity: ≤95%RH (no condensation)
• Size: Sensor body: 73x27x13mm, magnetic stripe: 55x12x13mm
• Function: When the magnetic and door contact are separated, it will send a wireless signal.

P10 PIR Motion Sensor

• Battery: AAA Battery x3
• Standby current: <15uA
• Alarm current: <25mA
• Wireless frequency: 433Mhz (FSK)
• Wireless coding: eV1527
• Working temperature: -10 ~ +50℃
• Storage temperature: -40 ~ +70℃
• Applicable humidity: ≤95%
• Product size: 115x60x41mm (Does not include bracket)
• Transmission distance: About 120 meters
• Anti-Pet Detection: 15kg Max
• Scan interval: 5s or 3min
• Function: After the PIR detector scans an object, it sends a 433Mhz radio frequency signal.

R10 Remote Controller

• Battery: CR2025 x1
• Standby current: <2μA
• Emission current: <7mA
• Wireless frequency: 433Mhz (FSK)
• Wireless coding: eV1527
• Transmission distance: >80M (open distance)
• Operating temperature: -10~55℃
• Storage temperature: -40~70℃
• Operating humidity: ≤95%RH (no condensation)
• Function: By triggering the button on the remote control, it transmits a signal, and the host responds after receiving the signal.

SN10 Wireless Flash Siren

• Power supply: AC 100~240V
• Built-in battery: 3.7V/500mAh
• Standby current: <10mA
• Alarm current: <200mA
• Wireless frequency: 433MHZ
• Receiving distance: 100 meters (open space)
• Encode: eV1527
• Wireless support: Up to 50pcs sensor and remote controllers
• Function: Scenario 1: The wireless siren receives the alarm model from the panel, emits an alarm sound and flashes, and acts as a loudspeaker alarm. Scenario 2: The wireless siren can be used as a recommended panel, adding wireless detectors and remote controls, and can be deployed and disarmed. The detector trigger will cause an alarm.

J008 Wireless Outdoor Siren

• Input voltage: DC9-15V
• Built-in battery: Ni-Hi AAA*6 DC 7.2V
• Alarm volume: 110 db
• F8 battery: 12V/23A
• Standby current: <20mA
• Alarm current: <300mA
• Received frequency: 433MHz
• Received distance: 80m (open area)

Mini Wired Siren

• Rated working voltage: 12V
• Input voltage range: 5V~15V
• Rated working current: <350mA
• Sound pressure range: 100~113dB
• Operating temperature: -40℃ ~ +80℃
• Power cord length: 600mm
• Function: It emits a buzzing sound by receiving current from the host.

S20 Smoke Detector

• Battery: AAA Battery *2
• Standby current: <10μA
• Alarm current: <150mA
• Sensor: photoelectric
• Alarm Volume: 80dB@1m
• Wireless frequency: 433Mhz (FSK)
• Wireless coding: eV1527
• Transmission distance: >80M (open distance)
• Working temperature: -10 ~ 55℃
• Operating humidity: ≤95%RH (no condensation)
• Size: 90*90*30mm
• Function: When smoke enters the smoke detector, it sends out a wireless signal and continues to alarm.

KERUI K259 Tuya Indoor Camera

• Power Supply: Included
• Input: AC 100-240V 50/60HZ
• Output: DC 5V~1A
• Working Temperature: -10℃ ~ 60℃
• Working humidity: 20% ~ 95% non-condensing
• Focal Length: 3.6mm
• Resolution: 1080P (1920*1080)
• Image Compression: H.264
• Viewing Angle: 135° (D)/85° (H)
• LED: 6pcs 850nm SMT IR LED

KERUI K268 Tuya Outdoor Camera

• Resolution: 3MP (2304*1296)/5MP (2880*1620)
• Power Supply: Included
• Input: AC 100-240V 50/60HZ
• Output: DC 12V~1A
• Working Temperature: -10℃ ~ 50℃
• Working humidity: 20% ~ 95% non-condensing
• Support memory card: Up to 128GB (C10)
• Image Compression: H.264
• PT Angle: 310°/140
• LED: 2 Light LED & 4 IR LED

Alarm Panel: At a Glance

1. Touchscreen: Displays system status, alarm information, logs, settings, SOS, Arm, Disarm, and Home Arm icons.
2. Light ring: Indicates ARM / DISARM / HOME ARM / ALARM status.
3. Tamper switch: Located underneath the bracket, it triggers an alarm notification if the panel is removed from its installed location.
4. Speaker: Provides voice prompts and alarm sounds.
5. Power port (Type-C): Connect the power cable here.
6. Backup battery ON/OFF: Push to ON to activate the built-in backup battery.
7. 4FF(Nano) SIM card slot: Insert the SIM card here.
8. Siren port: Plug in the siren cable here.
9. Wall Bracket: For installation.

Light Ring Status Indicators

Top Status Bar Icons

The icons in the status bar at the top of the screen show information about the panel.

Installation

Where to Place Your Devices

Smart panel: It should be close to where you come and go, making it easy to access. The panel needs a Wi-Fi Internet connection and cellular network to send notifications and text messages. Use an unswitched wall outlet. Avoid mounting the panel onto metal surfaces as this can block RF signals.

Wall Installation: Fix the bracket to the surface with included screws. Insert the panel into the bracket.

Desktop Placement: The panel comes with a kickstand. When opened, the kickstand allows placing the panel on the desktop.

Door/Window Sensor Placement

Attach the bracket and magnet to a flat surface using the included mounting strips. Then, hold the sensor against the bracket and push it down to fix it. The magnet should be aligned with the middle of the sensor and placed within 0.6 inches (1.5cm) of the sensor when the door or window is closed.

Motion Sensor Placement

Mounting height: It must be mounted 79 to 87 inches (2 to 2.2m) above the floor.

Mount the bracket with the included screws. Then place the motion detector in the bracket. Specify the right direction of the detection range of the motion sensor. Test the operation of the motion detector by putting it into testing mode.

Detection Area: The motion sensor has a detection range of up to 12 meters with a 110° motion range.

Special Considerations for Motion Sensor

• Do not install PIR Motion Detector outdoors, in a garage, or on glass.
• PIR Motion Detector cannot detect motion through glass.
• Do not install in places where PIR Motion Detector could get wet, like near swing-out windows that could be rained on.
• Do not install PIR Motion Detector within 3 feet (1 meter) of a heat source like an electric heater, heat vent, or fireplace, or another source that may produce turbulent air.
• Do not install PIR Motion Detector behind large appliances or furniture that may obstruct its motion sensors.

Initial Setup

Install the SIM Card

A micro SIM card is required for cellular services (text messages and alarm calls). Install the SIM card into the receptacle before getting started.

1. Slide the cover in the direction of the arrow and lift it up.
2. Install your SIM card into the slot.
3. Put down and slide back the cover in the direction of the arrow to lock it.

If the cellular icon at the top of the home screen turns black, your panel is connected to a cellular network.

Download and Install APP

Scan the QR code or search for "Smart Life" from GooglePlay/APP Store to get the free application for Android or iOS. Upon installation, the app will guide you through registration and connecting the panel to the internet.

Add Your Panel

1. Make sure your phone's Bluetooth is on and connected to your home's 2.4GHz Wi-Fi network (IMPORTANT: NOT 5G). Note: Dual-band routers need a separate 2.4GHz Wi-Fi signal setup.
2. On your panel, go to Main menu > Wi-Fi Setup > Ready > Start. The screen will display "CONNECTING...”
3. In the APP, tap the "+” icon in the top right corner to scan for devices automatically. Select your panel, enter the Wi-Fi network password, and follow the in-app instructions to complete the connection.

How to Pair/Add Sensor/Remote Tag

All sensors supplied with this kit are pre-paired. If you need to add more sensors or remote tags, follow these instructions:

Pairing by Panel

1. Go to Main menu > Accessories > + > Start. The panel will enter pairing sniffer mode and count down.
2. Trigger your device to be added before the panel sniffer countdown expires:

3. Once a device is captured, a window about the device pops up. You can edit the mode or type of device and give it a nickname, then tap Enter to add it.

About Sensor Mode

• Normal: Sensors set to Normal Zone are activated in Arm (full arm) or HOME Mode (home/stay/partial arm). Recommended for window sensors.
• 24 Hours: Sensors set to 24H Zone will activate the alarm regardless of the arm status.
• Delay: If sensors set to Delay Zone are triggered, the Hub will sound the alarm after the delay time passes. Recommended for primary entryways.
• Home: Sensors set to Home Zone are only activated in Arm (full arm). If Stay Arm Mode is used, these sensors are not armed. Recommended for PIR Motion Detectors.
• 24 Hours Silent: Same as 24 Hours but without sound.
• Home with delay: Same as Home but with Entry Delay in Arm.
• To disable a sensor, select Off.

Pairing by APP

1. In the APP, select your panel in the "All Devices" list, then tap Accessories > +. Your panel will enter pairing mode with the light ring blinking white.
2. Perform the same trigger step as described in "Pairing by Panel" above.
3. Once a device is captured, it will be added to the panel automatically and appear in the Accessories list in the APP.

Tips: Up to 100 sensors and 10 remote tags can be added.

How to Connect a Wireless Siren

1. Press and hold the SET button of the siren until you hear one beep. The siren will enter sniffer mode and its light ring will turn on.
2. Within 20 seconds, go to Main menu > Accessories > Send on the panel. The panel will display "Pairing Signal Sent" and send a transmission signal to the siren.
3. The siren will give a long beep to indicate successful pairing.

Tip: In case of an alarm, the siren sounds at 100dB.

System Settings

How to Set Contacts for SMS and Phone Calls

Up to 5 stored phone numbers will receive text messages (SMS) and phone calls in case of triggered alarms. Go to Main menu > Settings > Contacts to set.

Tips: You can also set phone numbers in the Setting page of your panel through the APP. The panel will make phone calls to the stored phone numbers successively (up to 2 rounds). If a phone call is answered and any Keypad Command is operated, it will stop calling the next phone number. Otherwise, it will continue to remind users for up to 2 rounds. When a call-in phone from the five stored numbers calls the panel, two-way talk is connected automatically.

Keypad Commands (During a call)

Auto-Lock

For additional security, you can require a passcode to unlock your panel. If Auto-Lock is set to 30 seconds or so and you don't operate the panel, the screen will automatically turn off and lock the device.

• To adjust the timing, go to Main menu > Settings > Security > AUTO-LOCK to choose a length of time. You can also choose "Never" to turn Auto-Lock off.
• To change your passcode, go to Main menu > Settings > Security > CHANGE PASSCODE. The default passcode is 1234.

Exit / Entry Delay

These are countdowns that allow you to enter and leave your home easily without causing the alarm to sound.

Exit Delay: Allows you to leave your home once you've armed the security system. You can adjust the countdown timing from 0 (No Exit Delay) to 999 seconds. The default is 40 seconds. Go to Main menu > Settings > Security > Exit Delay to adjust the value.

Entry Delay: Allows you to enter your home and disarm your system while in Away Arm Mode. You can adjust the countdown timing from 0 (No Entry Delay) to 999 seconds. The default is 30 seconds. Go to Main menu > Settings > Security > Entry Delay to adjust the value.

Tips: If you don't want to hear the countdown tick during delay, turn Entry/Exit Tick off to disable it. Exit / Entry Delay can also be adjusted through the APP.

Changing Alarm Sound Volume

Go to Main menu > Settings > Security > Sound Level. Alternatively, in the APP, go to Settings > Alarm sound volume to change the siren volume level in High / Low / Mute mode. In mute mode, the siren will not sound during an alarm.

Using the Smart Security System

Away Mode

All sensors in your home are monitored. This mode is useful when you are going out and want to be notified if anything happens.

How to away-arm:

• Press the Arm button using a remote tag.
• Tap the Arm icon on the home screen of your panel.
• Tap the AWAY ARM icon through the APP.

Home Mode

All NORMAL sensors are monitored, but HOME sensors are not monitored. This is useful if you are at home but want to be alerted if anyone tries to break in through a door or window.

How to home-arm:

• Press the Home Arm button using a remote tag.
• Tap the Home Arm icon on the home screen of your panel.
• Tap the HOME ARM icon through the APP.

Disarmed Mode

No sensors are monitored, except for 24 HOUR sensors. This is useful when you are at home and want the freedom to move around easily.

How to disarm:

• Press the Disarm button using a remote tag.
• Tap the Disarm icon on the home screen of your panel.
• Tap the DISARM icon through the APP.

How to Trigger an Alarm

• Press and hold the SOS icon for 3 seconds to trigger an emergency alarm.
• Tap the SOS icon through the APP.

Tips: In the APP, tap Setting > Timer to edit schedules for arming/disarming your system automatically at a daily time.

User Tips

• Camera Power: The cameras included in the kit are typically powered via cables and adapters. Ensure you use the provided power accessories for optimal performance.
• Sensor Online Detection: The system includes sensor online detection. An alarm will be triggered if the panel fails to detect a sensor for more than 72 hours, ensuring continuous monitoring.
• Language Settings: The system supports 6 languages (English, German, French, Italian, Spanish, Chinese) which can be switched at any time from the panel settings.

Troubleshooting

• No Cellular Network: If the cellular icon on the top status bar is black, ensure a SIM card is properly inserted and functional. Check SIM card status on the panel or through the app.
• No Wi-Fi Connection: If the Wi-Fi icon is gray, check your Wi-Fi network settings and ensure the panel is connected to a 2.4GHz network.
• Low Battery Indication: If the battery icon on the status bar is red, the backup battery is low. Ensure the panel is connected to AC power. For sensors, replace batteries promptly when the indicator blinks for low battery.
• False Alarms: Review motion sensor placement and special considerations to avoid false triggers from heat sources or turbulent air. Adjust pulse counter settings if available (refer to "Setting Switches" in the full PDF manual).
• Panel Unresponsive: If the panel screen is unresponsive, check the power supply and backup battery. If Auto-Lock is enabled, ensure you enter the correct passcode.
• Sensor Not Triggering: Ensure sensors are correctly paired and in the appropriate sensor mode (e.g., Normal, 24 Hours, Home). Check battery levels of the sensors.

Maintenance

• Battery Replacement: Replace sensor batteries (CR2032 for door/window, AAA for PIR, CR2025 for remote) promptly when low battery indicators appear.
• Cleaning: Regularly clean the alarm panel screen and sensor lenses with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Firmware Updates: Check the Smart Life/Tuya Smart app periodically for firmware updates for your alarm panel to ensure optimal performance and security.
• Power Supply: Ensure the alarm panel is always connected to a stable power source. The 5000mAh backup battery provides power during outages but should not be relied upon as the primary power source.

Additional Information and Support

For a complete and detailed user manual, including comprehensive wiring diagrams and advanced settings, please refer to the official PDF manual:

View Full User Manual (PDF)

For further assistance or technical support, please contact KERUI Official Store customer service.