JIUYIN 6 Inch Motorcycle Navigation and DVR System User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your JIUYIN 6-inch Motorcycle 2K DVR Navigation GPS Multimedia Player. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

2. Safety Information and Disclaimer

Please read the following instructions carefully before installation and operation to ensure safety and prevent damage to the product or your vehicle.

• This unit uses a negative ground and a 12V power supply.
• Always switch off the power of the vehicle before installation and switch it on again after installation.
• Plan the optimal mounting position before fixing the interconnected navigation recorder unit.
• This product is strictly prohibited from being rinsed with a high-pressure water gun or immersed in water to prevent water ingress.
• When connecting the camera, ensure it corresponds to the camera body logo.
• The camera is fully waterproof, but avoid contact with oil, alcohol, tar cleaner, and other solvents to prevent damage to the waterproof layer.
• For optimal file storage speed and safety, clear the storage space regularly.
• Due to continuous technological advancements, product structure and parameters may improve. If there are discrepancies between the manual's graphics/descriptions and the actual product, the actual product display shall prevail.
• This product is designed exclusively for motorcycles.
• Watching video programs and performing related operations while driving is prohibited by law in many countries. For your personal safety and the safety of others, do not watch videos or perform related operations while driving.
• The navigation functions (and optional functions) are intended as driving aids only. They do not imply that you can be distracted, careless, or lose judgment while driving. We are not responsible for any safety accidents caused by such actions.

Special Attention:

• Use a genuine 32-128GB, CLASS10 high-speed MICRO TF memory card. Format the memory card in the recorder when using it for the first time.
• After extended use, the memory card may accumulate fragmented files, which may cause audio/video file damage or loss. Please format and clean the memory card regularly.
• After installing the memory card, firmly press the rubber plug and lock the memory card cover to prevent water ingress and ensure the recorder's waterproof effect.

3. Setup and Installation

3.1 Pre-installation Precautions

Important: All disassembly and installation processes require disconnecting power and taking precautions to protect original vehicle parts to avoid damage.

1. The product power supply must not be connected directly to the motorcycle or electric car battery. Doing so will cause a short-circuit and prevent the product from powering on.
2. Power Supply Connection Principle: The device should receive 12V power when the engine is started or in ACC state, and 0V when the engine is off. Use a multimeter to verify this.
3. Before installing and connecting the power cord, use a multimeter to measure the voltage to ensure it meets the power supply connection principle for proper operation.

3.2 Finding the Power Source

Locate your motorcycle's power fuse box, typically near the front end or the battery. For electric vehicles, refer to the power adapter/adaptor.

3.3 Measuring Voltage

Prepare a multimeter to measure the 12V voltage before installation.

Measure the power supply of the fuse box to ensure it provides 12V when powered on (engine started or ACC state) and 0V when powered off.

3.4 Connecting the Power Cord

Take out the fuse and connect the positive pole of the power cord. Connect the GND wire to the negative terminal.

3.5 Mounting the Device and Accessories

The installation schematic below shows suitable positions for the main unit and accessories: crossbar, handlebar, or rearview mirror. The GPS line controller should be placed in a non-obstructed position (face up) for fast star search and accurate track recording.

3.6 Tire Pressure Sensor Installation (Optional)

If your model includes the optional tire pressure monitoring system (TPMS), follow these steps for external sensor mounting:

1. Screw the anti-theft hexagonal nut onto the valve thread of the tire first.
2. Screw the sensor clockwise onto the valve thread of the tire.
3. Use the clamp to tighten the anti-theft hexagonal nut counter-clockwise against the sensor to lock it securely.

Note: After installation, check for air leakage with soapy water.

For a visual guide on installation, please watch the tutorial video:

4. Operating Instructions

4.1 Product Overview and Controls

The JIUYIN Motorcycle Navigation and DVR system features a 6-inch IPS touch screen with 1000NIT high brightness for clear visibility even in direct sunlight. It supports Wireless CarPlay, Android Auto, and the ELOOK Pro mobile app for control and data management.

Remote Control Functions:

1. Video Slow Flash/Stop Constant Light: Indicates video recording status.
2. Answer Phone: Button to answer incoming calls.
3. Photo Lock Button: Short press to take a photo, long press to lock the current recording.
4. Menu Switcher: Default menu. Short press to switch to camera view, then to menu, then to CarPlay.

4.2 Boot Password

The device has an optional boot password feature.

1. Setting a Password: The default power-on password is "0000". You can change this in the 'Setting Function Item' menu.
2. Forgotten Password: If you forget your custom password, you can use the crack code "1333" to reset it to the initial "0000".
3. Turning Off the Boot Password: In the "Settings" page, navigate to "System Password" and select "Off" in the upper-left corner. This will allow the device to boot directly to the host interface without a password.

4.3 Mobile Phone Connection (Wireless CarPlay & Android Auto)

The device supports wireless CarPlay and Android Auto for seamless smartphone integration.

4.3.1 Wireless CarPlay Connection Steps

1. Select the CarPlay function from the Carphone-Mobile phone connection menu on the device.
2. Turn on Bluetooth and Wi-Fi on both your mobile phone and the device.
3. To find the device's Bluetooth information, locate the Bluetooth button in the main interface.
4. Connect your mobile phone to the device's Bluetooth name (e.g., TF801_xxx).
5. After Bluetooth connection, wait for your mobile phone to start the CarPlay function, and the screen will interconnect.
6. Once successfully connected, the device will automatically reconnect after reboot.

To disconnect CarPlay, turn off Bluetooth and Wi-Fi on your phone, or turn off Wi-Fi on the device and ignore the Bluetooth device on your phone.

4.3.2 Wireless Android Auto Connection Steps

1. Select the Android Auto function from the car-mobile phone connection menu on the device.
2. Turn on Bluetooth and Wi-Fi on both your mobile phone and the device.
3. To find the device's Bluetooth information, locate the Bluetooth button in the main interface.
4. Connect your mobile phone to the device's Bluetooth name (e.g., TF801_xxx).
5. After Bluetooth connection, wait for your Android mobile phone to start the Android Auto function, and the screen will interconnect.
6. If you are using a non-standard Android phone, you may need to update related components (Android Auto, Google Maps, Google Music, Google Services, etc.).

4.4 Wireless ELOOK PRO APP

The ELOOK PRO APP allows for real-time preview, control, and saving of videos and pictures from your device to your mobile phone.

ELOOK PRO APP Connection Procedure:

1. Choose the ELOOK PRO APP function in the car setup menu on the device.
2. Connect your mobile phone to the device's Wi-Fi hotspot (e.g., TF801-XXX). The default password is "12345678".
3. Scan the QR code displayed on the device to download the APK, then click to connect.
4. The app supports real-time preview, controlling the machine, and saving videos and pictures to your mobile phone.

4.5 Advanced Features

• 2K DVR with Front and Rear Cameras: The system includes front and rear 2K cameras for high-resolution recording.

  

• Automatic Loop Recording: After the vehicle starts, the system automatically loops through recording without dropping frames or missing seconds. It automatically overwrites earlier recorded files when the memory card is full.

  

• Collision Sensing Capture: A built-in gravity sensor automatically locks and saves pre- and post-collision recordings when sensing vibrations or collisions, preventing video from being overwritten.

  

• Professional EIS Anti-Shake Technology: Built-in image stabilization function processor and gyro sensor automatically recognize and reduce jitter in video recordings.

  

• Split Screen Display: Supports one screen dual display, allowing the navigation screen and main interface to be displayed separately.

  

• Tire Pressure Warning (Optional): If equipped with TPMS, the device provides real-time monitoring of tire pressure and immediate alarms for abnormal situations.

  

  Tire Pressure Matching: Screw the external tire pressure sensor onto the front tire nozzle. Deflate the tire slightly (you will hear air leakage). On the device, click the tire pressure interface's front wheel matching button ('FRO'). Once data appears, click 'Binding' for successful matching. Repeat for the rear wheel. Ensure no air leakage using soapy water after installation.

  Tire Pressure Setting: Adjust low/high pressure and tire temperature settings based on your vehicle manufacturer's recommendations.

5. Maintenance

• Memory Card Management: Regularly format and clean the MICRO TF memory card to prevent fragmentation and ensure optimal audio/video recording quality and storage safety.
• Waterproof Seal: After installing the memory card, ensure the rubber plug is firmly pressed and the memory card cover is locked to maintain the device's IPX8 waterproof rating.
• Lens Cleaning: If video recording is unclear, check for dust on the camera lenses and gently wipe them clean.
• General Cleaning: Clean the device's screen and body with a soft, dry cloth. Avoid using harsh chemicals or solvents that could damage the screen or waterproof seals.

6. Troubleshooting

Device cannot be switched on after vehicle ACC power is started.

Check if the wiring connection is normal and secure.

Front or rear camera does not show image.

If the front camera does not display, try swapping it with the rear camera. If the rear camera then fails to display, the camera itself may be faulty and needs replacement. If both cameras fail, check the camera cable connections.

Front and rear cameras are not displayed.

Check if the camera cable connections are normal and secure.

Video recording is not clear.

Check for dust on the lens and wipe it clean.

Bluetooth cannot be connected.

Verify that the Bluetooth password is correct when pairing the device with your mobile phone.

Bluetooth headset cannot be connected.

Check the host and Bluetooth headset matching. If the host cannot find the Bluetooth headset, it may be incompatible. Connect or replace the headset.

Unable to play back recorded video or photo in APP.

Check if the TF-SD card is damaged.

Screen display or video recording shows streak electromagnetic wave interference.

Check the camera alignment and cable tie. Ensure smooth alignment, not folded, and leave some margin. The cable tie should not be too tight, and the car shell should not extrude the cable too tightly.

7. Specifications

8. User Tips

• Powering Off: If the device remains on after turning off your motorcycle, ensure the power cord is correctly connected to an ACC (Accessory) line that cuts power with the ignition. If connected directly to the battery, it will remain on.
• Optimal Visibility: The 1000NIT high brightness screen is designed for direct sunlight. Adjust screen settings for optimal viewing in various conditions.
• Memory Card Care: To avoid video corruption, regularly format your Micro SD card, especially after long periods of use.

9. Warranty and Support

For detailed warranty information, please refer to the official product documentation. For technical support or inquiries, you may contact the manufacturer:

• Manufacturer: Xinfeng County Chexiaoer Trading Co., Ltd.
• Address: Jiuyin Technology, 3rd Floor, Building A, Fangshi Industrial Park, No. 82 Xingxue Road, Panyu District, Guangzhou City, Guangdong Province, Mainland China
• Tel: +86 15297879529
• Email: 1586905293@qq.com

A PDF version of the user manual is available for download: User Manual (PDF)

EU Representative:

• Company: eVatmaster Consulting Gmbh
• Address: Raiffeisen Street 2B11, 63110 Rodgau, Hessen, Germany
• Email: contact@evatmaster.com

This product is certified with RoHS, CE, ECE R22-05, FC, and UK CA marks.