SUNSHINE SS-890B MINI Laser Screen Removal Machine

1. Product Overview

The SUNSHINE SS-890B MINI is a compact and efficient laser machine designed for precise dismantling of mobile phone components. It specializes in removing screen brackets, glass back covers, and adhesive glue from various popular phone models, including iPhone X-17. The machine features automatic positioning, a high-definition touchscreen, and a visual workstation for enhanced safety and ease of use.

Key Features:

• Automatic Positioning: No manual operation required; the machine automatically and accurately positions and secures the phone.
• High-Definition Touchscreen: Smart touchscreen with high sensitivity, IPX-17 compatibility, and continuous updates for an extensive drawing library.
• Visual Workstation: Enables clear viewing of the work process while ensuring eye safety through a visual light filtering work chamber.
• Large Working Area: A 174*87mm working area supports a wide variety of popular phone models.
• Efficient Fume Extraction: Features a rear fan design for fast exhaust and supports external fume extraction systems as needed.
• Versatile Disassembly: Capable of complete disassembly of phone screen brackets, glass back covers (including various colors like white and frosted), and glue removal.

2. Setup Instructions

2.1 Unpacking and Inspection

1. Carefully remove the SS-890B MINI Laser Machine from its packaging.
2. Inspect the machine for any signs of damage during transit. Report any damage to your supplier immediately.
3. Verify that all components listed in the packing list are present.

2.2 Placement

• Place the machine on a stable, level, and non-vibrating surface.
• Ensure adequate ventilation around the machine.
• Position the machine in an area free from dust, excessive humidity, and direct sunlight.
• Maintain a safe distance from flammable materials.

2.3 Power Connection

1. Ensure the machine's power switch is in the 'OFF' position.
2. Connect the provided power cable to the machine's power input port.
3. Plug the power cable into a grounded electrical outlet with the correct voltage (110-230V, depending on your model).

2.4 Fume Extraction Setup (Optional but Recommended)

The SS-890B MINI features a rear fan for exhaust and supports external fume extraction systems. For optimal safety and air quality, it is highly recommended to connect an external fume extractor.

1. Connect the exhaust hose from the external fume extractor to the machine's rear exhaust port.
2. Ensure the connection is secure to prevent fume leakage.
3. Refer to your external fume extractor's manual for its specific setup and operation instructions.

3. Operating Instructions

3.1 Powering On and Initializing

1. Flip the power switch to the 'ON' position.
2. The machine will perform a self-check and the high-definition touchscreen will activate.
3. Follow any on-screen prompts for initial setup or calibration if necessary.

3.2 Placing the Device for Disassembly

1. Open the protective cover of the visual workstation.
2. Place the mobile phone securely on the working platform. The machine features automatic positioning, which will accurately secure the phone without manual adjustments.
3. Important: For screen bracket removal or precise glue application, ensure the lens is protected using appropriate stickers or metal sheets to prevent damage.
4. Close the protective cover. Ensure it is fully closed before proceeding to prevent eye injury from the laser.

3.3 Using the Touchscreen Interface

1. The touchscreen provides access to various functions and a comprehensive drawing library.
2. Navigate through the menus to select the desired operation (e.g., 'Screen Removal', 'Glass Back Cover Removal', 'Glue Removal').
3. Select the specific phone model from the extensive drawing library. The machine is compatible with a wide range of models, including iPhone X-17.
4. Review the laser path and settings on the screen.
5. Initiate the laser operation by pressing 'Start' on the touchscreen.

3.4 Laser Operation

• The laser will begin the selected disassembly process. The visual workstation allows you to observe the process safely.
• The machine is designed for complete disassembly without tedious adjustments, providing a one-stop repair experience.
• It can quickly and efficiently remove back glass in various colors.

3.5 Completing the Operation

1. Once the laser operation is complete, the machine will indicate its status on the touchscreen.
2. Open the protective cover.
3. Carefully remove the disassembled phone from the working platform.
4. Power off the machine when not in use.

4. Maintenance

4.1 General Cleaning

• Regularly clean the exterior of the machine with a soft, dry cloth.
• Ensure no dust or debris accumulates on the working platform or inside the visual workstation.
• Use a soft brush or compressed air to gently clean the laser lens area, ensuring it is free from particles that could affect laser performance.

4.2 Fume Extraction System Maintenance

• If an external fume extractor is used, follow its manufacturer's instructions for filter replacement and cleaning.
• Regularly check the exhaust hose for any blockages or damage.

4.3 Software Updates

• The machine's touchscreen supports continuous updates. Periodically check for and install software updates to ensure optimal performance and access to the latest drawing library and features.

5. Troubleshooting

• Machine Not Powering On:
  - Check if the power cable is securely connected to both the machine and the electrical outlet.
  - Ensure the power switch is in the 'ON' position.
  - Verify that the electrical outlet is functioning correctly.
• Laser Not Firing or Weak:
  - Ensure the protective cover is fully closed. The machine has safety interlocks that prevent laser operation if the cover is open.
  - Check for any error messages on the touchscreen.
  - Clean the laser lens as described in the Maintenance section.
• Inaccurate Positioning:
  - Ensure the phone is placed correctly on the working platform.
  - Check for any obstructions on the platform or around the positioning mechanism.
  - Perform a calibration if available in the touchscreen settings.
• Fume Buildup:
  - Verify that the external fume extractor (if used) is powered on and functioning.
  - Check the exhaust hose for blockages.
  - Ensure the fume extractor's filters are not clogged and replace them if necessary.
• Touchscreen Unresponsive:
  - Restart the machine.
  - If the issue persists, contact customer support.

6. Specifications

7. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the official SUNSHINE customer service channels. Ensure you have your product model (SS-890B MINI) and serial number readily available when seeking support.

8. User Tips

• Laser Type: The SS-890B MINI utilizes a fiber laser, which is ideal for precise material removal tasks like those required for phone repair.
• Software and Templates: Ensure that the necessary software and cutting templates for various phone models are either pre-loaded or readily available for download to maximize the machine's utility.
• Compatibility: The machine is designed to work with a wide range of iPhone models, including the latest iPhone X-17 series, and other popular smartphone brands. Always check the integrated drawing library for specific model support.
• Fume Extractor: While the machine has a built-in fan, an external fume extractor is highly recommended for a cleaner and safer working environment, especially during prolonged use.