1. Introduction
The P05 Ultrasonic Dog Repeller is a portable, USB rechargeable device designed to assist in dog training and prevent excessive barking. It utilizes advanced ultrasonic technology to emit sounds audible only to dogs, effectively deterring unwanted behaviors without causing harm to your pet. The device incorporates multi-acoustic processing to ensure dogs do not become accustomed to the sound interference, maintaining its effectiveness over time.
2. Product Features
- Ultrasonic Bark Prevention: Emits high-frequency sounds to deter unwanted barking and other undesirable behaviors.
- Multi-Acoustic Processing: Features varied sound patterns (Continuous, Intermittent, Frequency Hopping) to prevent dogs from becoming immune to the ultrasonic stimulus.
- BEEP Button Technology: Includes a dedicated beep button for positive reinforcement training, helping dogs associate commands with actions.
- LED Light Function: Equipped with an LED light button for additional visual cues during training or for use as a small flashlight.
- Portable Design: Compact and lightweight (90g, 11.5 x 2.8 x 3 cm) for easy carrying and use anywhere.
- USB Rechargeable: Built-in 300mAh battery with a Type-C input for convenient charging.
- Wide Application: Suitable for various environments including parks, homes, and outdoor training sessions.
- Universal Compatibility: Effective for all large, medium, and small dog breeds.
- Safe for Pets and Humans: Designed to be harmless to animals and inaudible to human ears.
3. Package Contents
Please check the package to ensure all items are present:
- 1 x P05 Ultrasonic Dog Repeller
- 1 x Type-C Charging Cable
- 1 x Instruction Manual
4. Specifications
| Feature | Detail |
|---|---|
| Product Model | P05 |
| Acoustic Frequency | 20-25KHZ |
| Material | ABS Plastic |
| Color Options | Blue gray / Orange black |
| Sound Modes | Continuous, Intermittent, Frequency Hopping |
| Battery Capacity | 300 mAh |
| Standby Current | 32 uA |
| Ultrasonic (Peak Value) | 510 |
| Product Weight | 90g |
| Input Interface | Type C |
| Product Dimensions | 11.5 cm (4.53 in) x 2.8 cm (1.18 in) x 3 cm (1.18 in) |
| Target Pet | Dog |
| Battery Included | No (Internal rechargeable battery) |
5. Setup and Charging
5.1 Initial Charge
Before first use, fully charge your P05 Ultrasonic Dog Repeller. Connect the provided Type-C charging cable to the device's charging port and plug the other end into a suitable USB power adapter (not included).
- The Power/Working Light (LED) will illuminate red during charging.
- The light will turn green once the device is fully charged.
6. Operating Instructions
The P05 Dog Repeller features multiple buttons and a mode switch for various functions:
6.1 Button Functions
- Ultrasonic Button: Press and hold this button to emit ultrasonic sound from the Ultrasonic Emission Port. This is the primary function for deterring unwanted dog behaviors.
- Beep Button: Press this button to emit an audible beep sound. This can be used as a training aid for commands or to get your dog's attention.
- LED Light Button: Press this button to activate the built-in LED light. Useful for visibility in low light conditions or as a visual cue during training.
6.2 Acoustic Wave Mode Selection
The device features an Acoustic Wave Mode switch on the side. Slide this switch to select one of the three ultrasonic modes:
- Continuous Mode: Emits a steady ultrasonic sound.
- Intermittent Mode: Emits ultrasonic sound in short bursts.
- Frequency Hopping Mode: Emits ultrasonic sound with varying frequencies to prevent habituation.
Experiment with different modes to find what is most effective for your dog's specific behavior.
7. Maintenance
- Cleaning: Clean the device regularly with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Water Exposure: Avoid exposing the device to water or excessive moisture. It is not waterproof.
- Temperature: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the device frequently. Charge it when the battery indicator shows low power.
8. Troubleshooting
- Device not turning on or not working: Ensure the device is fully charged. Check the charging cable and power source for proper connection.
- Dog not responding to ultrasonic sound:
- Ensure the device is pointed directly at the dog.
- Try switching between the different acoustic wave modes (Continuous, Intermittent, Frequency Hopping).
- Ensure you are within the effective range of the device.
- Some dogs may be less sensitive to ultrasonic sounds or may require more consistent training over time.
- Short battery life: Ensure the device is fully charged before each use. Prolonged use of the LED light can drain the battery faster.
9. User Tips
- For best results, use the device consistently during training sessions. Positive reinforcement (rewards, praise) should always accompany the use of the repeller to encourage desired behaviors.
- Varying the ultrasonic mode (continuous, intermittent, frequency hopping) can help prevent your dog from becoming accustomed to the sound, maintaining the device's effectiveness.
- The device is designed to deter unwanted behaviors, not to punish. Use it as a training aid to redirect your dog's attention and reinforce good habits.
10. Warranty and Support
For warranty information and technical support, please refer to the seller's policy or contact customer service through your purchase platform. Keep your proof of purchase for any warranty claims.
