LS VSBP90 5717315 18v5.4ah 5INR19/66-2

User Manual

LS Battery VSBP90 5717315 18V 5.4Ah

Model: VSBP90 5717315 18v5.4ah 5INR19/66-2

Introduction

This manual provides essential information for the safe and effective use of the LS VSBP90 5717315 18V 5.4Ah battery, designed as a new original replacement for GE Vivid iq medical devices. Please read this manual thoroughly before installation and operation to ensure proper functionality and longevity of the battery.

Setup and Installation

Before installing the battery, ensure the GE Vivid iq device is powered off and disconnected from any external power sources. Handle the battery with care to avoid damage to its connectors.

  1. Unpacking: Carefully remove the battery from its packaging. Inspect for any visible damage.
  2. Initial Charge: Although the battery may come with some charge, it is recommended to fully charge it before first use. Connect the battery to a compatible charger (not included, as per specifications).
  3. Checking Charge Status: Press the "TEST" button on the battery. The LED indicators (25%, 50%, 75%, 100%) will illuminate to show the current charge level.
  4. Installation into Device:
    • Locate the battery compartment on your GE Vivid iq device.
    • Align the battery's electrical connectors with the corresponding port in the device.
    • Gently slide the battery into the compartment until it clicks securely into place. Ensure the latch mechanism is engaged.
  5. Verification: Power on your GE Vivid iq device to confirm the battery is correctly installed and recognized.
Front view of LS VSBP90 battery with TEST button and charge indicators
Figure 1: Front view of the battery showing the "TEST" button and charge level indicators.
Side view of LS VSBP90 battery showing latch mechanism
Figure 2: Side view of the battery, highlighting the latch mechanism for secure installation.
Close-up of battery electrical connector pins
Figure 3: Detailed view of the battery's electrical connector pins.

Operating Instructions

The LS VSBP90 battery is designed for seamless integration with the GE Vivid iq device. Once installed, the device will draw power from the battery as needed.

  • Powering the Device: Ensure the battery is fully charged and properly installed before powering on your GE Vivid iq device.
  • Monitoring Charge: Regularly check the battery's charge level using the "TEST" button and LED indicators. This helps in planning charging cycles and avoiding unexpected power loss during operation.
  • Charging: When the battery charge is low, remove it from the device and connect it to a compatible charger. Follow the charger's instructions for optimal charging.

Maintenance

Proper maintenance ensures the longevity and performance of your battery.

  • Charging: Always use a charger compatible with 18V Li-ion batteries. Avoid overcharging or deep discharging the battery, as this can reduce its lifespan.
  • Storage: If storing the battery for an extended period, ensure it is charged to approximately 50-70% and stored in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cleaning: Keep the battery's exterior and connectors clean. Use a dry, soft cloth to wipe away dust or debris. Do not use liquid cleaners or solvents.
  • Inspection: Periodically inspect the battery for any signs of physical damage, swelling, or corrosion on the terminals. Discontinue use if any damage is observed.

Troubleshooting

If you encounter issues with your battery, refer to the following common troubleshooting steps:

Battery not charging:
  • Ensure the charger is properly connected to both the battery and a working power outlet.
  • Verify that the charger is compatible with this battery model (18V Li-ion).
  • Check for any visible damage to the battery or charger.
Device not powering on with battery:
  • Confirm the battery is fully charged by pressing the "TEST" button.
  • Ensure the battery is correctly and securely installed in the device's compartment.
  • Check the device's power input and battery contacts for any obstructions or damage.
Battery not holding charge:
  • Battery capacity naturally degrades over time. If the battery is old, it may need replacement.
  • Ensure proper charging and storage conditions are followed as per the Maintenance section.

If problems persist, contact customer support or a qualified technician.

Specifications

FeatureDetail
Model NumberVSBP90, 5717315, 5INR19/66-2
BrandLS
Voltage18V
Capacity5.4Ah
CompatibilityGE Vivid iq
Power SourceOther (Internal Battery)
Inbox AdaptorNo
High-Concerned ChemicalNone
Weight0.5 kg
Dimensions (L x W x H)11 cm x 9 cm x 7 cm
OriginMainland China

User Tips

No specific user tips were available from reviews or Q&A for this product. General battery best practices include:

  • Avoid exposing the battery to extreme heat or cold.
  • Do not attempt to disassemble or modify the battery.
  • Always dispose of old batteries responsibly according to local regulations.

Warranty and Support

For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Related Documents - VSBP90 5717315 18v5.4ah 5INR19/66-2

PreviewLS Tractor Parts Manual - Comprehensive Component Catalog
This document serves as a detailed parts manual for LS tractors, providing an extensive catalog of components for various systems including the engine, transmission, drivetrain, hydraulics, steering, braking, and electrical systems. It lists part numbers, names, specifications, and quantities, essential for maintenance and repair.
PreviewCPRmeter 2 Battery Hatch and Lanyard Replacement Guide | Laerdal
Comprehensive guide for replacing the battery hatch and optional lanyard on the Laerdal CPRmeter 2, providing step-by-step instructions and visual descriptions.
PreviewDELSEY PARIS Luggage Repair Guide & Tutorials
Comprehensive repair guide and tutorials for DELSEY PARIS luggage, covering common issues like wheel replacement, lock repair, trolley system maintenance, and handle fixes. Includes step-by-step instructions and required tools.
PreviewAngioExperience PRO4 Operating Manual - Advanced Vascular Diagnostics
Comprehensive operating manual for the AngioExperience PRO4 system by SOT Medical Systems, detailing its use for non-invasive peripheral vascular diagnostics, including setup, operation, troubleshooting, and technical specifications.
PreviewVelduro Rogue Rear Shock Compatibility Guide | FOX, Rockshox, Ohlins
This guide details rear shock compatibility for the Velduro Rogue bicycle, covering essential requirements, frame travel comparisons, design trade-offs, measurement methods, and comprehensive lists of compatible and incompatible shocks from major brands like FOX, Rockshox, and Ohlins.
PreviewKalorik VIVID 2-Slice Full Touchscreen Rapid Toaster Instruction Manual
Instruction manual for the Kalorik VIVID 2-Slice Full Touchscreen Rapid Toaster (Models TO52621SS/TO52622SS), covering safety, operation, features, recipes, cleaning, troubleshooting, and warranty information.