1. Introduction
This manual provides essential information for the safe and effective use of your K11 Car Phone Holder. Designed for convenience and versatility, this magnetic adsorption bracket offers a secure and adjustable solution for holding your smartphone in various environments, including cars, kitchens, and offices.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
3. Package Contents
The package includes:
- 1 x K11 Car Phone Holder
4. Specifications
| Feature | Detail |
|---|---|
| Model | K11 (SLN000650) |
| Material | Zinc Alloy, ABS Plastic |
| Color Options | Black, White |
| Special Features | Foldable, Rotatable, Magnetic Adsorption, Vacuum Suction Cup |
| Charger Included | No |
| High-concerned chemical | None |
| Origin | Mainland China |
| Dimensions (approx.) | Length: 10cm, Width: 10cm, Height: 6cm (packaged) |
| Diameter (folded) | 66mm |
| Weight (approx.) | 0.121 kg (packaged) |
| Load-bearing capacity | Up to 5KG |
5. Setup & Installation
The K11 Car Phone Holder features a vacuum suction cup for secure mounting. Follow these steps for proper installation:
Clean the Surface: Wipe the installation area (e.g., glass, flat dashboard, tile) with a clean, damp cloth. Ensure the surface is thoroughly dry and free of dust, dirt, and grease. For non-smooth surfaces like leather textures, an adhesive gasket or nano stickers (not included) may be required.
Figure 1: Multiple applicable scenarios for mounting.
Activate the Suction Cup: Peel off the protective film from the bottom of the suction cup. If your suction cup has a lever, ensure it is in the "OFF" or unlocked position.
Position and Press: Firmly press the suction cup against the desired mounting surface. Apply pressure to expel as much air as possible.
Secure the Suction: Push the lever all the way down to lock the suction cup, or tighten the locking ring (depending on your model) to create a strong vacuum seal. This expels remaining air and secures the holder.
Figure 2: Vacuum adsorption provides a super tight and stable hold.
Attach Your Phone: The holder features a strong magnetic adsorption surface. Simply bring your phone (with a compatible magnetic case or metal plate attached) close to the holder, and it will snap into place securely.
Figure 3: Accurate magnetic adsorption for one-handed retrieval and placement.
Multiple Scenarios
The K11 holder is versatile and can be used in various locations:
- Car: Mount on car windows, dashboards (flat, smooth surfaces), or the back of display screens for navigation or entertainment.
- Home/Office: Use on office desktops, washbasins, or dormitory/desk surfaces.
Figure 4: The holder is applicable in multiple scenarios.
6. Operating Instructions
Adjusting the Angle and Position
Telescopic Arm: The holder features a telescopic arm that allows you to extend or retract the phone's position for optimal reach.
Ball Joint: Utilize the ball joint mechanism to rotate the phone 360 degrees and tilt it to any desired viewing angle (portrait or landscape).
Figure 5: The holder offers 360° rotation for flexible viewing.
Folding Design: When not in use, the holder can be folded compactly for storage, making it mini and portable.
Figure 6: Compact and foldable design for easy storage.
Key Features Overview
Figure 7: Detailed view of the holder's components and features.
- Magnetic Block Array: Provides stable adsorption, easily coping with various complex road conditions.
- Zinc Alloy Support Arm: Durable and robust support for your device.
- Vacuum Adsorption: Easy to fix in multiple positions with strong suction.
- Rotation Lock: Securely holds the adjusted position without needing external power.
7. Maintenance
- Cleaning: Regularly wipe the suction cup and the magnetic surface with a clean, damp cloth to remove dust and ensure optimal grip. Ensure surfaces are dry before re-applying.
- Storage: When not in use, fold the holder to its compact form and store it in a clean, dry place to prevent dust accumulation on the suction cup.
- Inspection: Periodically check the suction cup and support arm for any signs of wear or damage. Do not use if damaged.
8. Troubleshooting
Suction Cup Not Sticking
- Clean Surface: Ensure the mounting surface is perfectly clean, dry, and free of any dust, oil, or residue.
- Clean Suction Cup: Wipe the suction cup with a damp cloth and let it air dry.
- Apply Pressure: Press the suction cup firmly against the surface before engaging the lock mechanism to expel all air.
- Surface Type: The vacuum suction cup works best on smooth, non-porous surfaces like glass or polished plastic. For textured or porous surfaces, a nano sticker or adhesive gasket (not included) may be required.
Phone Not Adhering to Magnetic Surface
- Metal Plate: Ensure your phone or phone case has a metal plate properly attached for magnetic adhesion.
- Obstructions: Check for any obstructions or thick cases that might weaken the magnetic connection.
9. User Tips
- For optimal stability, especially in a moving vehicle, ensure the suction cup is applied to the cleanest, smoothest possible surface.
- When using on a dashboard, consider placing it closer to the windshield for better visibility and stability.
- The foldable design makes it easy to remove and store when not needed, preventing it from becoming a visual obstruction.
10. Compliance Information
This product complies with all applicable safety and regulatory requirements in the market where it is sold.
CE
11. Manufacturer & Support
Manufacturer Information
Name: Shenzhen Meiteai E-commerce Co., Ltd
Address: CN-Building A, Building 201A, No. 8-14 Jinyuan Road, He'ao Community, Yuanshan Street, Longgang District, Shenzhen, 518000
Email: qiujianqiang@youyuepin.cn
Telephone: +86-13714205204
EU Authorized Representative
Name: SUCCESS COURIER SL
Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
Telephone: +34-910602659
Email: successservice2@hotmail.com
Warranty & Customer Support
For any questions, concerns, or warranty claims regarding your K11 Car Phone Holder, please contact the seller or manufacturer directly using the information provided above. Please retain your proof of purchase for any support inquiries.
A PDF version of this user manual is available for download here.