Introduction
The ENCHEN Beardo 2 is a versatile electric multi-functional trimmer designed for precise and comfortable grooming. Featuring an R-type cutter head, an 8000RPM high-frequency speed motor, and a long-lasting 1200mAh Li-Battery, it offers efficient trimming for various hair lengths and styles. This manual provides essential information for the safe and effective use of your trimmer.
Package Contents
Please check the box for the following items:
- 1 x ENCHEN Beardo 2 Trimmer
- 1 x USB Charging Cable
- 1 x User Manual
- 1 x Cleaning Brush
- 1 x Lubricating Oil
- 4 x Limited Guide Combs (3mm, 6mm, 9mm, 12mm)
Setup
Charging the Trimmer
- Ensure the trimmer is turned off before charging.
- Connect the Type-C USB charging cable to the charging port on the trimmer.
- Connect the other end of the USB cable to a suitable USB power adapter (not included) or a computer USB port.
- The LED indicator will show the charging status. A full charge takes approximately 90 minutes.
Attaching and Detaching Guide Combs
The trimmer comes with 4 detachable guide combs (3mm, 6mm, 9mm, 12mm) to customize your trimming length.
- Select the desired guide comb.
- Align the comb with the trimmer head and slide it on until it clicks into place.
- To remove, gently push the comb upwards from the back while holding the trimmer firmly.
Removing and Installing the T-Head (Tool Bit)
For cleaning or specific trimming needs, the T-head can be removed.
- To Disassemble the Tool Bit: Hold the shaving machine with one hand, and use the other thumb to gently push the tool bit towards the back of the body.
- To Mount the Tool Bit: Put the tool bit into the slot of the body card, press hard after alignment until you hear a "click" sound.
- To Install Limit Comb: Choose the appropriate length of the limit comb. Align the blade and buckle the limit comb into the T-head.
- To Remove the Limit Comb: Press and hold the tail of the comb and gently pull it outward to remove it.
Important: Turn off the trimmer before disassembling the tool bit and press the switch button to open the travel lock. To avoid falling and breaking the tool bit, push with one hand and catch the tool bit with the other hand when disassembling.
Operating Instructions
Basic Trimming
- Ensure the trimmer is fully charged or has sufficient power.
- Attach the desired guide comb for your preferred hair length. For precise edging or very short trims, you may use the trimmer without a comb.
- Press the power button to turn on the trimmer.
- Hold the trimmer against your skin, moving it slowly and steadily against the direction of hair growth.
- For best results, ensure the flat part of the comb or blade is always in contact with the skin.
- After use, turn off the trimmer by pressing the power button.
Haircut Tips with Guide Combs
- 0.8-2.55mm (Bald Head): Put the comb parallel to the scalp, push from bottom to top and trim the sides.
- 3-6mm (Buzz Cut): Put the comb parallel to the scalp, trim back hair.
- 9-12mm (Longer Cut): Hold the hair with your fingers, pan along the fingers, and trim the top of the head.
Smart Travel Lock Function
The trimmer is equipped with a smart travel lock to prevent accidental activation during transport. To activate/deactivate, press and hold the power button for a few seconds until the lock indicator appears/disappears.
LED Light Indicator
The smart LED light indicator reminds you of the current power level, signaling when it's time to charge the electric trimmer.
Maintenance
Cleaning the Trimmer
- Turn off and unplug the trimmer before cleaning.
- Remove the guide comb and the T-head (tool bit) as described in the Setup section.
- Use the provided cleaning brush to remove loose hairs from the blades and inside the trimmer head.
- The blades can be rinsed under running water. Ensure they are completely dry before reattaching. Do not immerse the entire trimmer body in water.
- Reattach the T-head and guide comb.
Oiling the Blades
Regular oiling helps maintain blade sharpness and prolongs the life of your trimmer.
- After cleaning and drying the blades, apply 1-2 drops of the provided lubricating oil onto the blades.
- Turn on the trimmer for a few seconds to allow the oil to distribute evenly.
- Wipe off any excess oil with a soft cloth.
Troubleshooting
- Trimmer not turning on: Ensure the battery is charged. Check if the travel lock is activated (indicated by a lock icon).
- Poor trimming performance: Clean the blades and remove any hair buildup. Apply lubricating oil to the blades. Ensure the guide comb is correctly attached.
- Unusual noise: Clean and oil the blades. If the noise persists, contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Product Name | Trimmer |
| Model | Beardo 2 |
| Brand | ENCHEN |
| Voltage | <20V |
| Battery Capacity | 1200mAh Li-Battery |
| Battery Charging Time | 90 minutes |
| Battery Life / Runtime | Up to 90 minutes |
| Motor Speed (Frequency) | 8000RPM |
| Noise Level | <65db |
| Minimum Cutting Length | 0.5 - 1 mm |
| Maximum Cutting Length | 11 - 20 mm |
| Length Adjustment Method | Change of nozzles (guide combs) |
| Number of Nozzles | 4 pcs (3mm, 6mm, 9mm, 12mm) |
| Functions | Wet haircut, Dry haircut, Fast Charging, Charging indication |
| Purpose | For beard and mustache, For the head |
| Product Size | 155mm (Length) x 28mm (Width) |
| Net Weight | 143.8g |
| Package Dimensions | 12cm (L) x 5cm (W) x 19cm (H) |
| Gross Weight of Box | 282.5g |
User Tips
- Blade Longevity: To ensure the longest lifespan and best performance from your trimmer blades, regularly clean them after each use and apply a small amount of lubricating oil. This helps prevent wear and tear.
- Consistent Power: For optimal performance, ensure your trimmer is fully charged before each use. The LED indicator will help you monitor the battery level.
- Experiment with Combs: Don't hesitate to try different guide combs to find the perfect length and style for your beard or hair. Start with a longer comb if unsure.
Warranty and Support
For warranty information, technical support, or inquiries about spare parts, please refer to the contact details provided with your purchase or visit the official ENCHEN website. Keep your proof of purchase for any warranty claims.
