1. Introduction
Thank you for choosing the E-YOOSO Hz-68 RGB Wired Mechanical Gaming Keyboard. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new keyboard. Please read this manual thoroughly to ensure optimal performance and longevity of your device.
2. Package Contents
Please check the package for the following items:
- E-YOOSO Hz-68 RGB Wired Mechanical Gaming Keyboard
- Detachable Type-C to USB Connection Cable
- Keycap/Switch Removal Tool
- Complimentary Keycaps (if included)
- User Manual (this document)
3. Setup Guide
- Connect the Keyboard:
Insert the Type-C end of the provided cable into the Type-C port on the keyboard. Connect the USB-A end of the cable to an available USB port on your computer (PC, Laptop, or Tablet).
Figure 3: Detachable Type-C cable connection for portability - Driver Installation (Optional):
For advanced customization, including macros and specific lighting effects, download and install the E-YOOSO driver software from the official website. The keyboard functions as a standard plug-and-play device without the software, but full features are unlocked with it.
- Adjust Foot Supports:
The keyboard features a single-stage foot support design. Flip out the foot supports on the underside of the keyboard to adjust the typing angle to your preference.
4. Operating Instructions
4.1. Basic Functions
- 68-Key Layout: The compact 68-key layout optimizes desk space while retaining essential functionality.
- Full Key Punchless (N-Key Rollover): Ensures that every command is registered accurately, even during fast-paced gaming, preventing ghosting or missed key presses.
4.2. FN Composite Functions
The keyboard utilizes FN (Function) key combinations to access multimedia controls and other shortcuts. Refer to the table below for common FN key combinations:
| Function Key Combination | Action |
|---|---|
| FN+1! | F1 |
| FN+2@ | F2 |
| FN+3# | F3 |
| FN+4$ | F4 |
| FN+5% | F5 |
| FN+6^ | F6 |
| FN+7& | F7 |
| FN+8* | F8 |
| FN+9( | F9 |
| FN+0) | F10 |
| FN+-_ | F11 |
| FN+=+ | F12 |
| FN+[{ | Home |
| FN+]} | End |
| FN+L | PrntSc |
| FN+;: | ScrLK |
| FN+'" | Pause |
| FN+Z | Volume- |
| FN+X | Volume+ |
| FN+C | Mute |
| FN+V | Stop/Play |
| FN+B | Previous Song |
| FN+N | Play/Pause |
| FN+M | Next Song |
4.3. Keyboard Lighting
The Hz-68 supports 14 kinds of light switching modes and offers customizable RGB backlighting. Use the following key combinations to control the lighting:
- FN+SHIFT: Switch between different lighting modes.
- FN+↑/↓: Adjust the brightness of the light effect. When adjusted to maximum or minimum brightness, the capital 'A' indicator light will flash three times.
- FN+←/→: Adjust the speed of the light effect. When adjusted to maximum or minimum speed, the capital 'A' indicator light will flash three times.
- FN+ENTER: Adjust the backlight color (Red, Green, Blue, Yellow, Pink, Cyan, White, RGB cycle).
4.4. Magnetic Switches & Rapid Trigger (RT)
The keyboard features Pink Magnetic Switches with an 8K switching return rate, offering advanced customization:
- Adjustable Trigger Point: The magnetic shaft is connected to a Hall sensor, allowing you to adjust the trigger point from 0.1mm to 4.0mm across 40 levels. This enables precise control over key actuation.
- Rapid Trigger (RT) Function: This feature allows you to assign different functions on a single keystroke based on the depth of the press. It's particularly useful for FPS games, enabling actions like "emergency stop" or "running and hitting" by combining light and deeper presses.
4.5. Pro Software Customization
Utilize the E-YOOSO driver software to unlock the full potential of your keyboard:
- Design custom lighting modes and effects.
- Create macros with different keybindings or shortcuts for enhanced efficiency in work and gaming.
- Set different switch travel distances to match various usage scenarios.
5. Maintenance
5.1. Cleaning the Keyboard
- Keycaps: Use a soft, damp cloth to wipe the keycaps. For deeper cleaning, you can remove the keycaps using the provided removal tool.
- Keyboard Body: Wipe the metal upper cover and plastic base with a dry or slightly damp cloth. Avoid excessive moisture.
- Dust Removal: Use compressed air to remove dust and debris from between the keycaps and switches.
5.2. Hot-Swappable Switches
The Hz-68 supports hot-swapping of all keys, allowing you to easily replace or customize mechanical switches without soldering.
- Removing a Keycap: Use the keycap puller to gently pull the keycap straight up.
- Removing a Switch: Use the switch removal tool. Press the retaining clips on the top and bottom of the switch, then gently pull the switch straight up.
- Installing a Switch: Align the pins of the new switch with the holes on the PCB. Gently press the switch down until it clicks into place. Ensure the pins are not bent.
- Installing a Keycap: Align the keycap with the switch stem and press down firmly until it is seated.
5.3. Detachable Cable
The detachable Type-C cable makes the keyboard easy to carry and store when traveling, and simplifies cable management.
6. Troubleshooting
- Keyboard not responding:
- Ensure the USB cable is securely connected to both the keyboard and the computer.
- Try connecting the keyboard to a different USB port on your computer.
- Test the keyboard on another computer to rule out a computer-specific issue.
- Lighting not working or incorrect:
- Check FN key combinations for lighting control (FN+SHIFT, FN+↑/↓, FN+←/→, FN+ENTER).
- Ensure the E-YOOSO driver software is installed and updated if you are using custom lighting profiles.
- Keys not registering or double-typing:
- This could indicate a faulty switch. Utilize the hot-swappable feature to replace the affected switch.
- Ensure the keycap is properly seated on the switch.
- If using custom trigger points, try resetting them to default or adjusting them in the software.
- Software not detecting keyboard:
- Ensure the software is the correct version for your keyboard model.
- Reinstall the software and restart your computer.
- Ensure the keyboard is directly connected to the computer, not through a USB hub.
7. Specifications
| Feature | Detail |
|---|---|
| Model | Hz-68 |
| Connection | Wired (USB Type-C) |
| Switch Type | Magnetic Switch (Pink Switch) |
| Switch Return Rate | 8K |
| Lighting | RGB (Multicolor, 14 modes) |
| Number of Keys | 68 keys |
| Keycap Type | Dual Injection Moulded Keycaps |
| Hot Swap Support | Yes |
| N-Key Rollover | Full key punchless |
| Dimensions (L x W x H) | 310mm x 100mm x 35mm |
| Application | Desktop, Tablet, Laptop |
| Style | Ergonomics, Gaming, Standard, Mini, Slim, Multifunctional, Multimedia |
| Language | English |
| Certifications | CE, FCC |
| Package Weight | 0.82 kg |
| Package Dimensions | 35 cm x 15 cm x 6 cm |
8. User Tips
- Experiment with Trigger Points: Take time to adjust the magnetic switch trigger points (0.1mm to 4.0mm) using the software to find the perfect sensitivity for different games or typing tasks.
- Utilize Rapid Trigger: For competitive gaming, practice with the Rapid Trigger (RT) function to master quick key resets and double-taps, which can significantly improve response times.
- Custom Lighting Profiles: Create and save multiple lighting profiles using the software for different applications or moods.
- Macro Efficiency: Program frequently used key sequences or complex commands into macros via the software to streamline your workflow or gaming actions.
- Cable Management: The detachable Type-C cable allows for easy replacement and better cable management on your desk. Consider using cable clips to keep your setup tidy.
9. Warranty and Support
The E-YOOSO Hz-68 keyboard is designed for durability and performance. For any warranty claims or technical support, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty validation.
This product complies with CE and FCC certification standards.
