T-WOLF Thunder Wolf Q13B Dual-Mode Wireless Mouse User Manual

Introduction

Thank you for choosing the T-WOLF Thunder Wolf Q13B Dual-Mode Wireless Mouse. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new mouse. Please read it carefully to ensure optimal performance and longevity of your device.

Setup Guide

Package Contents

T-WOLF Thunder Wolf Q13B Wireless Mouse
USB Receiver (for 2.4GHz Wireless Mode)
USB Charging Cable

Charging the Mouse

Before first use, or when the battery is low, connect the mouse to a USB power source using the provided USB charging cable. The mouse supports charging while in use.

Charging time: Approximately 2.5 hours for a full charge.

Diagram showing the T-WOLF Q13B mouse connected via USB cable for charging, with a 'CHARGING...' indicator on the mouse screen.

Figure 1: Mouse connected for charging, displaying 'CHARGING...' status.

Connecting via 2.4GHz Wireless (USB Receiver)

Locate the USB receiver, usually stored in a compartment on the underside of the mouse.
Plug the USB receiver into an available USB port on your computer or laptop.
Turn on the mouse using the power switch (typically on the underside). The mouse should automatically connect.

T-WOLF Q13B mouse in red illumination, with a USB receiver shown in the corner, indicating 2.4GHz wireless connectivity.

Figure 2: Mouse with its 2.4GHz USB receiver.

Connecting via Bluetooth

Turn on the mouse using the power switch.
Switch the mouse to Bluetooth mode (refer to the underside of the mouse for a mode switch, if present, or a dedicated button).
On your device (laptop, mobile phone, etc.), go to Bluetooth settings and enable Bluetooth.
Search for new devices. The mouse should appear as "T-WOLF Q13B" or similar.
Select the mouse to pair. Follow any on-screen prompts.

Image showing the T-WOLF Q13B mouse in green illumination, highlighting its 2.4GHz and Bluetooth dual-mode capabilities.

Figure 3: T-WOLF Q13B mouse highlighting its dual-mode connectivity.

Operating Instructions

Basic Functions

Left Click: Primary action, selection.
Right Click: Context menu, secondary action.
Scroll Wheel: Scroll up/down, middle click (press wheel).
DPI Button: (If present) Adjusts cursor sensitivity/speed. Press to cycle through DPI settings.
Side Buttons: (If present) Often used for forward/back navigation in web browsers or customizable in gaming software.

Dual-Mode Switching

The T-WOLF Q13B supports both 2.4GHz wireless and Bluetooth connectivity. Use the mode switch on the underside of the mouse to toggle between these modes as needed for different devices.

Illumination Control

The mouse features illuminated lighting. Specific controls for changing colors or lighting modes may be available via a dedicated button (often near the scroll wheel or on the underside) or through software (if applicable). Refer to the product page or manufacturer's website for software availability.

T-WOLF Q13B mouse in various illuminated colors, showcasing its RGB lighting.

Figure 4: T-WOLF Q13B mouse displaying its vibrant illumination.

Maintenance and Care

Cleaning

Ensure the mouse is turned off before cleaning.
Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the surface.
Avoid using harsh chemicals, abrasives, or solvents.
Use a cotton swab or compressed air to clean around buttons and the scroll wheel.

Battery Care

To prolong battery life, avoid completely draining the battery frequently.
Charge the mouse regularly, especially if it will be stored for an extended period.
Do not expose the mouse to extreme temperatures.

Troubleshooting

Problem	Possible Cause	Solution
Mouse not responding (2.4GHz)	USB receiver not properly connected. Mouse is off or battery is low. Interference.	Ensure USB receiver is firmly plugged into a working USB port. Try a different port. Turn on the mouse and charge it if the battery is low. Move the mouse closer to the receiver or away from other wireless devices.
Mouse not pairing (Bluetooth)	Mouse not in Bluetooth pairing mode. Bluetooth on device is off. Already paired with another device.	Ensure mouse is switched to Bluetooth mode and in pairing state (often indicated by a blinking light). Enable Bluetooth on your device and search for new devices. Disconnect from other devices or remove previous pairings.
Lag or erratic cursor movement	Low battery. Dirty sensor. Poor surface.	Charge the mouse. Clean the optical sensor on the underside of the mouse. Use on a clean, non-reflective mouse pad or surface.

Specifications

Feature	Detail
Brand	T-WOLF
Model	Q13B
Connectivity	2.4GHz Wireless, Bluetooth Dual-Mode
Power Source	Rechargeable Battery
Charging	USB Charging Cable, approx. 2.5 hours for full charge, supports charging while in use.
Illumination	Yes (Illuminated Gaming Mouse)
Compatibility	Laptops, Mobile Phones, Universal
Origin	Mainland China

Warranty and Support

For any issues or questions regarding your T-WOLF Thunder Wolf Q13B mouse, please contact the seller or manufacturer's customer support. Keep your purchase receipt for warranty claims.

This product is eligible for free returns within 90 days of purchase, as per seller policy.

User Tips

To conserve battery life, remember to turn off the mouse when not in use for extended periods.
Experiment with different DPI settings to find the sensitivity that best suits your usage, especially for gaming.
If experiencing connection drops, try to minimize interference from other 2.4GHz devices (like Wi-Fi routers) or switch to Bluetooth mode if available.
For optimal tracking, use the mouse on a good quality mouse pad.

	T-WOLF Q13 Wireless Gaming Mouse User Manual User manual for the T-WOLF Q13 Wireless Gaming Mouse, detailing its features, specifications, and FCC compliance information.
	T-WOLF T70 Tri-Mode Mechanical Keyboard User Manual and Specifications Detailed specifications, features, and operating instructions for the T-WOLF T70 Tri-Mode Mechanical Keyboard, supporting Bluetooth, 2.4G wireless, and Type-C wired connections.

T-WOLF Q13B