1. Introduction
The CYCLAMI Mini Inflator Pump Z5L is a portable electric air compressor designed for convenient and efficient inflation of various items, including bicycle tires, motorcycle tires, car tires, and sports balls. Featuring a digital display, preset tire pressure function with auto start/stop, and emergency lighting, it offers a reliable solution for on-the-go inflation needs.
Figure 1: CYCLAMI Mini Inflator Pump Z5L and included accessories.
2. Package Contents
Please check the package for the following items:
- CYCLAMI Mini Inflator Pump Z5L (Main Unit)
- Extension Tube
- Ball Needle
- Presta Valve Adapter
- Other Adapters (as pictured)
- USB Type-C Charging Cable
- User Manual
Figure 2: Detailed view of the pump and its accessories.
3. Product Features
- High Pressure Output: Max 130PSI for efficient inflation.
- Smart Inflation: Preset tire pressure with auto start/stop function, thanks to a built-in tire pressure sensor.
- Digital Display: Real-time pressure display with switchable PSI and BAR units.
- Multiple Modes: Three preset scene modes for different inflation needs (e.g., bicycle, motorcycle, car, ball).
- Emergency Lighting: Built-in LED light for use as an emergency flashlight.
- Compact & Portable: Miniature size, lightweight (~380g), designed for one-hand operation.
- Powerful Motor: Newly upgraded brushless motor for enhanced inflatable speed.
- Type-C Charging: Convenient and universal charging interface.
- Overheat Protection: Ensures safe operation.
Figure 3: Key features of the CYCLAMI Z5L pump.
4. Specifications
Figure 4: Technical specifications of the CYCLAMI Z5L.
| Parameter | Z5L |
|---|---|
| Maximum Pressure | 130PSI |
| Battery Capacity | 2000*2mAh |
| Volumes | 15L/min |
| Pressure Setting Range | 4-130PSI |
| Charging Method | TYPE-C |
| Charging Time | 180min |
| Size | 113.5*70*38.5mm |
| Weight | ~381g |
| Orifice Compatibility | AV/FV (Schrader/Presta) |
| Material | ABS+PMMA |
| Operating Noise | ≤76dB |
| Auto Standby | Yes |
| Display Screen | Yes |
| Overheat Protection | Yes |
| Operation Keys | 5 Mechanical Buttons |
| Extended Hose | Yes |
5. Setup
5.1 Charging the Inflator
- Connect the provided USB Type-C charging cable to the charging port on the inflator.
- Connect the other end of the cable to a compatible USB power adapter (not included) or a power bank.
- The digital display will indicate charging status. A full charge takes approximately 180 minutes.
5.2 Attaching the Hose and Adapters
- Screw the extension tube securely onto the inflator's air outlet.
- Select the appropriate adapter for the item you wish to inflate:
- SV Extension Tube: Suitable for mountain bikes, E-bikes, motorcycles, cars (Schrader valves).
- SV Extension Tube + Adapter: For French valves (Presta valves) on road bikes and some mountain bikes.
- SV Extension Tube + Balloon Needle: For inflating sports balls (basketball, football, soccer, rugby) and swimming rings.
- Attach the selected adapter firmly to the end of the extension tube.
Figure 5: Adapters for various inflation needs.
6. Operating Instructions
6.1 Powering On/Off
- Power On: Press and hold the power button (
) for a few seconds until the digital display illuminates. - Power Off: Press and hold the power button again, or the device will automatically power off after a period of inactivity (auto standby).
6.2 Understanding the Digital Display
The digital display shows real-time pressure, selected mode, and battery level. You can switch between PSI and BAR units.
Figure 6: Digital display showing pressure units and mode icons.
6.3 Selecting Inflation Mode
Press the 'M' button to cycle through the preset inflation modes:
- Bicycle mode
- Motorcycle mode
- Car mode
- Ball mode
Each mode has a default pressure setting, which can be adjusted.
6.4 Setting Target Pressure
- After selecting a mode, use the '+' and '-' buttons to increase or decrease the target pressure.
- The display will show the current pressure and the target pressure.
6.5 Starting and Stopping Inflation
- Connect the attached hose and adapter to the valve of the item you wish to inflate.
- Press the power button once to start inflation. The pump will automatically stop when the preset target pressure is reached.
- To manually stop inflation, press the power button again.
Figure 7: Inflating a bicycle tire with auto start/stop.
6.6 Using Emergency Lighting
Press the light bulb button () to turn on the built-in LED emergency light. Press again to turn it off. This can be used as a flashlight in low-light conditions.
Figure 8: Emergency lighting in use.
6.7 Recommended Pressure Guidelines
Refer to the table below for general recommended inflation pressures. Always check the manufacturer's recommended pressure for your specific item.
Figure 9: Recommended pressure ranges.
| Form | Product Type | Pressure Range |
|---|---|---|
| Bikes | Folding Bike | 45-50PSI |
| 12, 14, 16 inch Bicycle Tires | 30-50PSI | |
| 20, 22, 24 inch Bicycle Tires | 40-50PSI | |
| 26, 27.5, 29 inch Bicycle Tires | 45-65PSI | |
| 700CC Road Bike | 100-110PSI | |
| Motorcycle | Motorcycles, Electric Vehicles | 30-43PSI |
| Balls | Basketball | 7-9PSI |
| Football | 8-16PSI | |
| Soccer | 4-5PSI | |
| Rugby | 2-14PSI |
6.8 Product Demonstration Video
Video: Product demonstration showing features like digital display, preset modes, compact size, 130PSI power, multi-use, and emergency lighting.
7. Maintenance
- Cleaning: Wipe the exterior of the inflator with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the inflator in a cool, dry place away from direct sunlight and extreme temperatures. Keep it out of reach of children.
- Battery Care: To prolong battery life, charge the device regularly, even if not in frequent use. Avoid fully discharging the battery for extended periods.
- Hose and Adapters: Ensure the hose and adapters are clean and free from debris before and after each use to prevent blockages.
8. Troubleshooting
- Device not turning on: Ensure the battery is charged. Connect to a power source and try again.
- Inflation not starting: Check if the hose and adapter are securely connected to both the inflator and the item's valve. Ensure a target pressure is set above the current pressure.
- Inaccurate pressure reading: Ensure the adapter is tightly sealed to the valve. Environmental factors can sometimes cause minor fluctuations.
- Pump stops unexpectedly: The device has overheat protection. Allow it to cool down before resuming operation. Check battery level.
- Slow inflation: Ensure the battery is sufficiently charged. Check for any blockages in the hose or adapter.
9. User Tips
- Always check the recommended pressure for your specific item (tire, ball, etc.) before inflating to avoid over-inflation or under-inflation.
- For bicycle tires, especially road bikes, ensure the Presta valve adapter is used correctly and the valve core is open before attaching the pump.
- Keep the inflator charged, especially before long trips, to ensure it's ready for emergencies.
- The emergency light is useful for nighttime repairs or visibility; remember to turn it off when not needed to conserve battery.
- When inflating small items like balls, monitor the pressure closely as they inflate quickly.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's contact information or the official CYCLAMI website. Keep your purchase receipt as proof of purchase.
