Gisam Cordless Car Polisher Instruction Manual

1. Introduction

Thank you for choosing the Gisam Cordless Car Polisher. This manual provides essential information for the safe and effective use of your new tool. Please read it thoroughly before operation and keep it for future reference. This versatile tool is designed for car polishing, waxing, dewaxing, and sanding, as well as household tasks like floor, marble, wood furniture, metal, and tile cleaning.

2. Safety Instructions

Warning! Read the full instructions. Failure to follow the instructions below may result in electrocution, fire, or serious injury.

2.1. Working Environment

• Ensure that the environment is clean and bright.
• Do not use tools near explosive substances such as flammable liquids or gases.
• Ensure that bystanders, especially children, are kept at a safe distance from deployed equipment.

2.2. Electrical Safety

• The plug of the tool must be appropriate to the type of power socket initially suitable.
• Conduct electricity in contact with the ground. Contact with such objects increases the risk of electric shock.
• Do not use tools under conditions that may result in direct contact with water.

2.3. Personal Safety

• Use common sense carefully when using tools. Do not use this tool if you are exhausted and under the influence of alcohol, drugs, or medications that reduce your concentration.
• Always take care of your eyes.

2.4. Use and Maintenance of Tools

• If the switch does not work properly, stop using the equipment immediately.
• Equipment that cannot be deactivated by the switch poses a risk and requires immediate repair.
• If power tools or accessories are damaged, repair them.
• Keep tools out of reach of children and do not provide them to persons who are not familiar with their operation and instructions.

2.5. Operation Instructions

• Do not use this product on soft, uneven ground, sloping or slippery and unstable areas.
• Before each use, check for loose screws, missing parts, polishing tool installation status, etc.
• Before using the product, read the instruction manual carefully to fully understand how to use the product.
• Do not insert batteries when adjusting the equipment.

3. Package Contents

The Gisam Cordless Car Polisher is available in various configurations. Please check your package against the list below.

3.1. No Battery Type

• 1 x Polisher Machine
• 1 x Flat Pad
• 1 x Wave Pad
• 1 x Wool Pad
• 1 x Sandpaper
• 5 x Cushion Covers (2 Microfiber, 1 Woven Fabric, 1 Wool)
• 1 x Apron
• 1 x Polishing Gloves
• 1 x User Manual
• 1 x Carton Box

3.2. 1 Battery Type

• 1 x Polisher Machine
• 1 x Battery
• 1 x Charger
• 1 x Flat Pad
• 1 x Wave Pad
• 1 x Wool Pad
• 1 x Sandpaper
• 5 x Cushion Covers (2 Microfiber, 1 Woven Fabric, 1 Wool)
• 1 x Apron
• 1 x Polishing Gloves
• 1 x User Manual
• 1 x Carton Box

3.3. 2 Battery Type

• 1 x Polisher Machine
• 2 x Batteries
• 1 x Charger
• 1 x Flat Pad
• 1 x Wave Pad
• 1 x Wool Pad
• 1 x Sandpaper
• 5 x Cushion Covers (2 Microfiber, 1 Woven Fabric, 1 Wool)
• 1 x Apron
• 1 x Polishing Gloves
• 1 x User Manual
• 1 x Carton Box

4. Product Overview

The Gisam Cordless Car Polisher features a robust design with a digital display for speed control and battery status. It is designed for comfortable and efficient operation.

4.1. Components

1. Display Screen: Shows current speed gear and battery level.
2. Power Switch & 8 Speed Adjustable: Controls power and speed settings.
3. Nonslip Handle: Provides a secure and comfortable grip.
4. Battery Level Display: Indicates remaining battery charge (Green: fully charged, Red: needs recharging).
5. Backing Pad: The base where polishing pads are attached.
6. Polishing Pad: Various pads for different applications (flat, wave, wool, sandpaper).
7. Battery: Rechargeable lithium-ion battery (18V Makita compatible).

5. Setup

5.1. Battery Installation

To Install Batteries:

1. Align the battery with the battery slot on the polisher.
2. Insert the battery firmly into the base of the machine until it clicks into place.
3. Gently pull on the battery to ensure it is fixed securely.

To Remove Batteries:

1. Press the release button on the battery.
2. Slide the battery out from the battery dock.

5.2. Installing the Adhesive Disc (Polishing Pad)

1. Make sure the polisher's power switch is off.
2. Take the desired polishing pad (e.g., flat pad, wave pad, wool pad, sandpaper).
3. Stick the fluffy side of the adhesive disc firmly onto the 150mm diameter self-adhesive backing pad (chassis) of the polisher.
4. Ensure the pad is securely attached and centered.

6. Operating Instructions

6.1. Power On/Off and Speed Adjustment

The digital display will show the current speed setting. Adjust the speed according to the task: lower speeds for gentle waxing and higher speeds for aggressive polishing.

6.2. Waxing and Polishing

• Apply the wax or polishing compound to the sponge dish or directly to the pad. Do not apply liquid wax directly to the vehicle surface.
• Move the equipment at a uniform speed on the surface.
• Work at a matching speed suitable for the task.
• Do not press the equipment excessively; let the tool do the work.
• Be sure to turn off the equipment before removing it from the surface.
• For corners or grooves that are hard to reach, manual application may be necessary.

7. Cleaning and Maintenance

• Turn off the device and remove the battery from the battery dock before cleaning.
• Do not store it in a place with dust and dirt.
• Use a twisted wet cloth to clean the equipment shell.
• Do not lubricate the inside of the machine. Dust and debris may deposit on the grease.
• Do not store it in a damp place.
• Protect the machine from direct sunlight.
• Recommended storage temperature: 5-20°C.

8. Troubleshooting

If you encounter issues with your Gisam Cordless Car Polisher, refer to the following common problems and solutions:

• Polisher not turning on: Ensure the battery is fully charged and correctly inserted. Check the power switch.
• Reduced performance: The battery level display (red light) indicates it needs recharging. Ensure the correct pad is used for the task.
• Excessive vibration or noise: Check if the polishing pad is securely and evenly attached to the backing pad. Ensure no foreign objects are caught in the mechanism.
• Battery not charging: Ensure the charger is properly connected to both the battery and a working power outlet.

If problems persist, please contact customer support.

9. Specifications

10. User Tips

• Battery Compatibility: This polisher is adapted for 18V Makita B series lithium batteries (e.g., BL1830, BL1850, BL1840, BL1840B, BL1850B). It is NOT compatible with G Series batteries (e.g., BL1813G, BL1413G) or 18V Ni-CD batteries.
• Battery Capacity: A battery capacity of 2.0AH - 5.0AH is suggested for optimal performance.
• Digital Display: Pay attention to the digital display for precise speed control and battery status. The power alert function uses green (fully charged), yellow, and red (needs recharging) lights.
• Versatile Use: Beyond car detailing, users have found this tool effective for polishing furniture, cleaning sinks and tubs, sanding wood, and even massaging muscles (with appropriate attachments).

11. Warranty and Support

11.1. Warranty Information

The product includes a 12-month warranty from the date of purchase. Gisam offers online after-sales service for this period. We will repair or replace defective products within the warranty period due to manufacturing defects.

11.2. User Manual PDF

A detailed user manual in PDF format is available for download. You can access it via the following link: Gisam Cordless Car Polisher User Manual (PDF).

11.3. Contact Support

For any questions, troubleshooting assistance, or warranty claims, please contact Gisam customer support through the official store channel.

12. Frequently Asked Questions (FAQ)

Q: Does the polisher come with a battery?

A: The polisher is available in different package sets: 'No Battery Type', '1 Battery Type', and '2 Battery Type'. Please check your specific order details to confirm if batteries are included.

Q: Do I need a specific type of battery?

A: Yes, the polisher is designed to be compatible with 18V Makita B series lithium batteries (e.g., BL1830, BL1850, BL1840, BL1840B, BL1850B). It is not compatible with Makita G Series batteries or 18V Ni-CD batteries.