TJPD Q600 Wireless Game Controller User Manual

1. Introduction

The TJPD Q600 Wireless Game Controller is designed to enhance your gaming experience across multiple platforms, including PlayStation 4, PlayStation 3, PC, Android, iOS, and Steam. Featuring a unique crack RGB design with dynamic LED lighting, programmable back buttons, adjustable turbo functions, 6-axis gyro, and HD dual vibration, this controller offers precision and customization for competitive and casual gamers alike.

2. Package Contents

Please check the package contents upon unboxing:

• TJPD Q600 Wireless Game Controller
• USB Charging Cable
• User Manual (this document)

3. Setup and Connection

3.1 Initial Charging

Before first use, fully charge the controller using the provided USB cable. Connect the small end of the USB cable to the controller's charging port and the larger end to a USB power source (e.g., console, PC, USB wall adapter). The LED indicator will show charging status and turn off or change color when fully charged.

3.2 Connecting to PS4/PS3

1. Ensure your PlayStation console is powered on.
2. Connect the controller to the console using the USB charging cable.
3. Press the PS button on the controller. The controller will pair with the console.
4. Once paired, you can disconnect the USB cable for wireless play.

3.3 Connecting to PC (Windows)

The controller supports both wired (USB) and wireless (Bluetooth) connections to PC.

Wired Connection:

1. Connect the controller to your PC using the USB charging cable.
2. The PC should automatically detect and install the necessary drivers.
3. The controller is ready for use.

Bluetooth Connection:

1. Ensure your PC has Bluetooth enabled.
2. On the controller, press and hold the PS button and Share button simultaneously until the light bar starts flashing rapidly.
3. On your PC, go to Bluetooth settings and search for new devices.
4. Select the controller (usually named 'Wireless Controller' or similar) from the list and pair.
5. The light bar will turn solid when connected.

3.4 Connecting to Android/iOS Devices

1. Ensure Bluetooth is enabled on your mobile device.
2. On the controller, press and hold the PS button and Share button simultaneously until the light bar starts flashing rapidly.
3. On your Android/iOS device, go to Bluetooth settings and search for new devices.
4. Select the controller (usually named 'Wireless Controller' or similar) from the list and pair.
5. The light bar will turn solid when connected.

4. Operating Instructions

4.1 Basic Controls

The Q600 controller features standard gamepad buttons:

• Face Buttons: Triangle, Circle, Cross, Square
• D-Pad: Up, Down, Left, Right
• Analog Joysticks: Left and Right (L3/R3 clickable)
• Shoulder Buttons: L1, R1
• Trigger Buttons: L2, R2 (Non-Linear)
• PS Button: Power on/off, access system menus
• Share Button: Share gameplay content
• Options Button: Access in-game menus
• Touchpad: Interactive input surface

4.2 Programmable Back Buttons (M1, M2)

The controller includes two programmable back buttons (M1 and M2) located on the rear. These buttons can be mapped to other controller inputs or record macros of up to 12 keystrokes to customize your gaming experience.

To program a back button:

1. Press and hold the 'T' (Turbo) button and the desired back button (M1 or M2) simultaneously for 3 seconds until the LED indicator flashes.
2. Press the button(s) you wish to map (e.g., Triangle, R1, etc.) or perform the sequence of actions for a macro (up to 12 keystrokes).
3. Press the back button (M1 or M2) again to save the mapping/macro. The LED will stop flashing.

4.3 Turbo Function (Auto-Turbo)

The controller supports both manual and continuous (auto) turbo functions with adjustable speeds.

To activate Turbo:

1. Press and hold the 'T' (Turbo) button, then press the button you want to apply turbo to (e.g., Cross button). The button will now rapidly repeat when held down.

To activate Auto-Turbo:

1. Press the 'T' (Turbo) button and the desired button (e.g., Cross button) simultaneously. Release both. The button will now continuously repeat without being held down.
2. To deactivate Auto-Turbo, repeat step 1.

To adjust Turbo speed:

1. With Turbo or Auto-Turbo active on a button, hold the 'T' (Turbo) button and move the Right Analog Stick Up or Down.
2. There are three frequencies: 8 times/sec, 15 times/sec, and 25 times/sec. The controller will vibrate to indicate the speed change.

4.4 RGB Lighting Modes

The controller features a unique crack design with 8 colors of breathing LED light and different flash modes.

To change RGB lighting modes:

• Specific button combinations for changing RGB modes are typically detailed in the quick start guide. Refer to the included quick start guide for precise instructions on cycling through the 8 available lighting modes.

4.5 6-Axis Gyro and HD Dual Vibration

The controller integrates a 6-axis gyro for precise motion control in compatible games and HD dual vibration motors for immersive haptic feedback, enhancing realism during gameplay.

5. Maintenance

5.1 Cleaning

• Use a soft, dry cloth to wipe the controller.
• For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution.
• Do not use harsh chemicals or abrasive materials, as they may damage the surface.
• Avoid getting liquid into the controller's ports or openings.

5.2 Battery Care

• The controller features a 1200mAh battery. For optimal battery life, avoid fully discharging the controller frequently.
• Charge the controller regularly, even if not in use for extended periods (e.g., once every 3 months).
• Do not expose the controller to extreme temperatures.

6. Troubleshooting

6.1 Controller Not Connecting/Pairing

• Ensure the controller is fully charged.
• Try connecting via USB first to establish an initial connection.
• For Bluetooth, ensure the controller is in pairing mode (LED flashing rapidly).
• Remove previous Bluetooth pairings from your device/console and try pairing again.
• If issues persist, locate the small reset button on the back of the controller (often a small pinhole, see Figure 4). Use a thin object (like a paperclip) to press and hold the reset button for a few seconds. Then, attempt to pair again.

6.2 Buttons/Joysticks Not Responding

• Ensure the controller is properly connected and powered on.
• Test the controller with another game or application to rule out software issues.
• Perform a controller reset (see 6.1).
• Check for any physical obstructions or debris around the buttons or joysticks.

6.3 Turbo Function Not Working

• Ensure you are following the correct steps for activating Turbo or Auto-Turbo (see 4.3).
• Verify that the button you are trying to apply Turbo to is compatible with the function.

7. Specifications

8. User Tips

• Customization: Experiment with the programmable back buttons to find optimal configurations for your favorite games. Mapping complex button sequences to a single back button can significantly improve reaction time.
• Turbo Use: Utilize the auto-turbo feature for games requiring rapid button presses, such as fighting games or shooters, to reduce finger fatigue.
• Battery Management: For longer gaming sessions, consider keeping the controller connected via USB to your PC or console to charge while playing.
• Platform Switching: When switching between different platforms (e.g., PS4 to PC), you may need to re-pair the controller via Bluetooth or connect it with a USB cable for initial recognition.

9. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller or retailer from whom you purchased the TJPD Q600 Wireless Game Controller. Keep your proof of purchase for warranty purposes.