User Manual: GOUYESHO DZ8032-008 Voice Bluetooth Remote Control

1. Introduction

Thank you for choosing the GOUYESHO DZ8032-008 Voice Bluetooth Remote Control. This remote is designed for direct use with various EVPAD and EVAI set-top boxes without complex setup. It features a strong signal, sensitive keys, and voice control capabilities to enhance your viewing experience. This manual provides essential information for proper installation, operation, and maintenance of your new remote control.

2. Safety Information

• Keep the remote control away from water and other liquids.
• Do not expose the remote control to direct sunlight or extreme temperatures.
• Avoid dropping or subjecting the remote control to strong impacts.
• Keep batteries out of reach of children.
• Dispose of used batteries responsibly according to local regulations.

3. Package Contents

The package typically includes:

• 1 x GOUYESHO DZ8032-008 Voice Bluetooth Remote Control

Note: Two 1.5V AAA batteries are required and are not included in the package.

4. Specifications

5. Setup

5.1. Battery Installation

1. Open the battery compartment cover on the back of the remote control.
2. Insert two 1.5V AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
3. Close the battery compartment cover securely.

5.2. 2.4G Wireless Pairing Guide (for Voice Function)

For the voice control feature to work, the remote needs to be paired with your TV Box via 2.4G wireless communication.

1. Ensure the remote control is within 20cm of your TV Box.
2. Press and hold the OK button and the Return button (usually the curved arrow) simultaneously.
3. Continue holding until the LED indicator on the remote flashes, indicating it has entered pairing state.
4. The LED light will then stay on for 2-5 seconds and turn off, signifying that the pairing process is complete.

Note: For basic IR functions (like power, volume, channel), the remote is designed for direct use without programming or pairing after battery installation.

6. Operating Instructions

6.1. Basic Functions

The remote control features standard buttons for TV box operation:

• Power Button (Red): Turns the TV Box on or off.
• Power Button (Green): TV Control Power.
• Mute Button: Mutes or unmutes the audio.
• Volume Up/Down: Adjusts the volume.
• Navigation Arrows (Up, Down, Left, Right): Navigates through menus and content.
• OK Button: Confirms selections.
• Voice Button (Microphone icon): Activates voice control (requires 2.4G pairing).
• Home Button (House icon): Returns to the main home screen.
• Return Button (Curved arrow): Goes back to the previous screen.
• AV/TV Button: Switches input source on the TV.
• Number Pad (0-9): For direct input or channel selection.

6.2. Learning Function (IR Learning)

This remote control supports IR learning, allowing it to mimic functions from another infrared remote (e.g., your TV remote) onto specific buttons.

1. Press and hold the TV Power button (green power button under 'TV Control') for approximately 5 seconds until the red LED indicator on the remote stays lit. This indicates it has entered learning state.
2. Press the button on the GOUYESHO remote that you wish to program (e.g., the 'Mute' button). The red LED lamp will flash, entering into learning receiving state.
3. Align the infrared emitters of your original remote control and the GOUYESHO remote control head-to-head, keeping a distance of 3-5mm.
4. Press the corresponding button on your original remote that you want the GOUYESHO remote to learn (e.g., the 'Mute' button on your TV remote).
5. The red LED lamp on the GOUYESHO remote will flash three times and then stay lit after successful learning.
6. Repeat steps 2-4 for any other buttons you wish to program.
7. After learning all desired functions, press any button on the GOUYESHO remote (other than the ones being programmed) to exit the learning state. The red LED lamp will turn off.

If the LED lamp flashes 5 times and returns to the learning state, the learning was not successful. Please repeat steps 2-4.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the remote control. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace batteries when the remote's performance degrades or it stops responding. Always replace both batteries at the same time with new ones of the same type (AAA 1.5V).
• Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage.

8. Troubleshooting

8.1. Remote is not responding.

• Check if the batteries are inserted correctly with the right polarity.
• Replace old batteries with new 1.5V AAA batteries.
• Ensure there are no obstructions between the remote and the TV Box's IR receiver.
• Make sure the remote is pointed directly at the TV Box.

8.2. Voice control is not working.

• Ensure the remote control is properly paired with your TV Box via 2.4G wireless (refer to Section 5.2).
• Check the distance between the remote and the TV Box; try to be within a reasonable range.
• Verify that your TV Box supports voice control and that the feature is enabled in its settings.

8.3. Learning function failed.

• Ensure both remotes are aligned head-to-head at a distance of 3-5mm.
• Make sure the original remote has sufficient battery power.
• Repeat the learning steps carefully, ensuring the LED indicator behaves as described.

9. User Tips

• For optimal performance, keep the remote control and your TV Box free from dust and debris.
• When using voice control, speak clearly and directly into the microphone on the remote.
• If you experience intermittent issues, try re-pairing the remote control with your TV Box.

10. Warranty and Support

This product is manufactured to high-quality standards. For any issues or support, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty claims.

11. Compliance

This device complies with CE certification standards.