Rowin LBL-01 Guitar Beat Loop Pedals Drum Looper Machine

1. Introduction

The Rowin LBL-01 Beat Loop is a versatile pedal combining a micro looper and a drum machine, designed for musicians seeking a compact and powerful tool for practice, performance, and songwriting. It offers extensive looping capabilities, a wide range of drum rhythms, and seamless integration with an external footswitch for enhanced control.

2. Safety Information

• Use only a DC 9V power adapter (external positive, internal negative) with a current of more than 500mA. Using an incorrect power supply may damage the unit and void the warranty.
• Do not expose the unit to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the unit to strong impacts.
• Do not attempt to disassemble or repair the unit yourself. Refer all servicing to qualified personnel.
• Keep out of reach of children.

3. Package Contents

• 1 x Rowin LBL-01 Beat Loop Pedal
• 1 x USB Cable
• 1 x Connection Cable (for footswitch)
• 1 x External Footswitch
• 1 x English Manual

4. Product Overview & Features

The LBL-01 Beat Loop combines a looper and drum machine into a single, compact pedal. It features an LCD screen for clear status indication and intuitive controls.

Key Features:

• Integrated Looper & Drum Machine: Combines two essential tools for musicians.
• Three Operating Modes: Looper, Drum, and Looper + Drum.
• Independent Level Controls: Separate playback volume controls for looper and drum.
• High-Quality Audio: WAV file format, Mono, 48K 24-bit sampling, 105dB dynamic range.
• Extensive Storage: 30 storage locations, each up to 5 minutes, totaling 50 minutes of recording time.
• Unrestricted Overdub: Allows for unlimited overdubbing on loops.
• Diverse Drum Rhythms: 40 drum effects (2 groups: 1-20 standard drum, 21-40 electronic drum).
• USB Connectivity: Supports USB audio device for recording/playback (48K sampling rate) and online system upgrades. Audio files (WAV format only) can be imported and exported.
• Intuitive Controls: Two encoders with key functions and built-in footswitch pedals.
• LCD Backlight: Displays recording, overdub, playing, stop, undo, and redo status.
• External Footswitch: Included footswitch connects via a 1/4" Ctrl In jack to control FILL, INTRO, and END functions.

5. Setup

5.1 Power Connection

1. Connect a DC 9V power adapter (external positive, internal negative) to the 'DC 9V' input jack on the top of the pedal.
2. The unit can also be powered via the USB port.

5.2 Audio Connections

1. Connect your instrument (e.g., guitar) to the 'In' jack on the right side of the Beat Loop pedal.
2. Connect the 'Out L' and 'Out R' jacks to your amplifier, mixer, or audio interface.
3. For external audio input, connect a device to the 'Aux In' jack.
4. For private monitoring, connect headphones to the headphone jack.

5.3 Footswitch Connection

1. Connect the included footswitch to the 'Ctrl In' jack on the right side of the Beat Loop pedal using the provided connection cable.

6. Operating Instructions

6.1 General Controls

• Left Knob (Encoder): Push to select loop number or volume. Rotate to change values.
• Right Knob (Encoder): Push to select drum beat number, tempo, or volume. Rotate to change values.
• Play/Rec Footswitch (Left): Controls looper recording and playback.
• Stop/Clear Footswitch (Right): Controls looper stop and clear functions, and drum machine start/stop.

6.2 Looper Function

1. Select Loop Slot: Push the Left Knob once. Rotate to select one of the 30 available loop slots (NO: 01-30).
2. Adjust Loop Volume: Push the Left Knob twice. Rotate to adjust the volume of the selected loop (VOL: 00-99).
3. Record: Press the 'Play/Rec' footswitch (left). The LCD will show a red indicator, signifying recording is active.
4. Stop Recording/Start Playback: Press the 'Play/Rec' footswitch again. The recording will stop, and the loop will begin playing back.
5. Overdub: While a loop is playing, press the 'Play/Rec' footswitch. The LCD will show a red indicator, allowing you to record another layer over the existing loop. Press again to stop overdubbing and continue playback.
6. Undo/Redo: Hold the 'Play/Rec' footswitch to undo the last overdub. Hold again to redo.
7. Stop Playback: Press the 'Stop/Clear' footswitch (right).
8. Clear Loop: Hold the 'Stop/Clear' footswitch. This will erase the current loop.

6.3 Drum Machine Function

1. Select Drum Beat: Push the Right Knob once. Rotate to select one of the 40 drum beats (NO: 01-40).
2. Adjust Tempo: Push the Right Knob twice. Rotate to adjust the tempo (TEMPO: 040-240).
3. Adjust Drum Volume: Push the Right Knob three times. Rotate to adjust the drum volume (VOL: 00-99).
4. Start/Stop Drum Beat: Press the 'Stop/Clear' footswitch (right).

6.4 Sync Function

To synchronize the drum beat with your recorded loop:

• Hold the Left Knob (encoder) until a 'SYNC' indicator appears on the LCD. This will sync the drum machine's tempo with the recorded loop's tempo.

6.5 External Footswitch Usage

The external footswitch provides hands-free control over drum fills and song sections.

• 'FILL' Footswitch: Press to trigger a drum fill. The fill will automatically adjust to the current drum beat.
• 'Intro/End' Footswitch: Press to trigger an intro or ending drum pattern.

6.6 USB Connectivity

Connect the Beat Loop pedal to a Windows computer using the provided USB cable for advanced functions:

• Audio Device: The pedal can function as a USB audio device, supporting 48K sampling rate for recording and playback.
• File Management: Import and export audio files (WAV format only) to and from the pedal.
• System Upgrade: Perform online system upgrades to ensure your pedal has the latest features and bug fixes.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the pedal. Do not use abrasive cleaners or solvents.
• Storage: Store the pedal in a dry, cool place away from direct sunlight and extreme temperatures.
• Power: Disconnect the power adapter when the pedal is not in use for extended periods.
• Connections: Ensure all cables are securely connected to prevent signal loss or damage.

8. Troubleshooting

• No Sound: Check all audio cable connections, ensure the power adapter is correctly plugged in, and verify that the volume levels for both the looper and drum machine are not set to zero.
• Recording Issues: Ensure you are in the correct operating mode (Looper or Looper + Drum) and that the selected loop slot is not full. Check that the input signal is strong enough.
• Drum Machine Not Playing: Verify that a drum beat is selected and the drum volume is up. Ensure the drum machine is not paused.
• Footswitch Not Responding: Check the connection cable between the footswitch and the 'Ctrl In' jack. Ensure the cable is fully inserted.
• Sync Problems: If the drum beat and loop are out of sync, ensure the sync function is activated by holding the Left Knob until 'SYNC' appears.

9. Specifications

10. User Tips

• Experiment with Drum Fills: The 'FILL' footswitch can be used creatively to add dynamic changes to your drum patterns. Try triggering fills on different beats within a measure.
• Utilize Sync Mode: For perfectly synchronized loops and drum beats, always ensure the 'SYNC' function is active. This is especially useful when building complex arrangements.
• Backup Your Loops: Regularly connect your pedal to a computer via USB to back up your recorded loops. This prevents accidental loss of your creative work.
• Explore Different Modes: Don't limit yourself to just one mode. Switch between Looper, Drum, and Looper + Drum to discover new creative possibilities and practice techniques.

11. Warranty & Support

For any issues, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.